Entertainment; Using The Network; Connecting To A Network - LG 55LS35A Owner's Manual
Monitor signage
Hide thumbs
Also See for 55LS35A:
- Owner's manual (78 pages) ,
- Owner's manual (76 pages) ,
- Owner's manual (75 pages)
Table of Contents
Advertisement
20
ENTERTAINMENT
ENTERTAINMENT
Using the Network
Connecting to a Network
For wired network connections, connect the dis-
play to a local area network (LAN) via the LAN port
as shown on the following diagram. Then, set up
the network settings. For wireless network connec-
tions, connect the Wi-Fi USB module to the USB
port. Then, set up the network settings.
After making a physical connection, a small
number of home networks may require the display
network settings to be adjusted. For most home
networks, the display will connect to automatically
without any adjustments.
For detail information, contact your internet pro-
vider or router manual.
Router
@
Cable modem
Internet
Internet
CAUTION
Do not connect a modular phone cable to
y
y
the LAN port.
Since there are various connection meth-
y
y
ods, please follow the specifications of your
telecommunication carrier or internet service
provider.
LAN
LAN
WAN
ETHERNET
To set up the network settings: (Even if your dis-
play has already connected automatically, running
setup again will not harm anything),
Connecting to a wired network
1
Press SETTINGS to access the main menus.
2
Press the navigation buttons to scroll to
WORK
and press OK.
3
Press the navigation buttons to select
Setting
and press OK.
4
If you already set network setting, select
Resetting. The new connection settings resets
the current network settings.
5
Select
IP Auto Setting
-
IP Manual Setting
press the navigation and number buttons. IP
addresses will need to be input manually.
-
IP Auto Setting
Select this if there is a DHCP server (Router)
on the local area network (LAN) via wired
connection, the display will automatically be
allocated an IP address. If you're using a
broadband router or broadband modem that
has a DHCP (Dynamic Host Configuration
Protocol) server function. The IP address will
automatically be determined.
6
When you are finished, press EXIT.
NET-
Network
or
IP Manual
Setting.
Advertisement
Chapters
Table of Contents
