Table of Contents
Advertisement
16
USING THE MONITOR SET
USING THE MONITOR SET
Connecting to a PC
Your Monitor set supports the Plug & Play* feature.
* Plug & Play: A PC will have a built-in driver for
the monitor, no extra software is needed.
NOTE
It is recommended to use the Monitor set
y
with the HDMI connection for the best image
quality.
To comply with the specifications of the
y
product, use a shielded interface cable with
ferrite core, such as D-sub 15 pin cable and
DVI/HDMI cable provided with the product.
If you turn the Monitor set on when the set
y
becomes cold, the screen may flicker. This
is normal.
Some red, green, or blue spots may appear
y
on the screen. This is normal.
CAUTION
y
Do not press the screen with your finger for
y
a long time as this may result in temporary
distortion on the screen.
Avoid displaying a fixed image on the
y
screen for a long period of time to prevent
image burn. Use a screensaver if possible.
Connect the signal
input cable and tighten
it by turning the screws
clockwise.
RGB Connection
Transmits the analog video signal from your PC to
the Monitor set. Connect the PC and the Monitor
set with the 15 pin signal cable as shown in the
following illustrations. Select RGB input.
Back of the product.
RGB
/COMPONENT OUT
RGB
/COMPONENT IN
Macintosh Adapter
(not included)
PC/MAC
NOTE
Use the standard Macintosh
y
adapter since an incompatible
adapter is available in the
market. (Different signaling
system)
Apple computers may require an adapter to
y
connect to this monitor. Call or visit their web
site for more information.
AUDIO
IN
REMOTE
CONTROL IN
(not included)
PC
Advertisement
Table of Contents
Troubleshooting
