Table of Contents
Advertisement
MicroHarmony Cell Sizes 40 - 260A Manual
CHAPTER
3
Installation
3.1 Packaging Requirements
The 40-260A MicroHarmony cells are designed to be shipped within the drive. For spare parts shipment, the cell
should be packaged as shown below:
Fill bottom of box with
Instapak sealed air foam in
bag packaging material.
The cell is designed to meet general shipping vibration as specified by Mil-Std-810, Method 514.3, category 1-basic
transportation, provided that the above procedure is met.
3.2 Lifting Preferences
The cell's weight ranges from 52-113 pounds. If a lifting device is not available, a cell can be lifted and handled
manually. It is recommended that two persons be used to lift and install a power cell. If a cell is lifted alone, the
following procedure should be followed.
Keep the cell close to your body and lift with the legs, not the back. Avoid twisting your back. Carry the cell close to
your body, not on extended arms.
When installing cells in the system, always have someone help.
Never carry the cell by the locking latches. They are not designed to support the weight of the cell. Always lift the
cell from the bottom. Do not lift the cell from the lid or the front grill.
19001467: Version 1.0
Place cell into box on top of
foam. Be sure that the
locking latches are pointed
up.
s
Installation
Fill sides and top with Instapak
sealed air foam packaging
material. Before cooling, close
box lid to form top. Check for air
pockets and fill as needed.
Seal box and ship.
3
3-1
Advertisement
Table of Contents
