Table of Contents
Advertisement
3-3. Maintenance Group
3-3-1. Network Page
Network settings can be modified on the Network page of the Maintenance group.
Tip
This function is nearly the same as maintenance menu [M5: NETWORK] of the unit.
Status
Network Settings
Software Version
DHCP
Internal Storage
IP Address
Maintenance
Subnet Mask
Network
Default Gateway
SNMP
Status
Account
Setup Menu
Software Update
Log
Warning
Item
Network Settings
DHCP
IP Address
Subnet Mask
Default Gateway
Status
Note
•
Change the DHCP settings with the Maintenance menu (M50: DHCP). For how to change the DHCP settings, refer to the
Operating Instructions.
•
When the DHCP is enabled, the IP address, subnet mask, and default gateway settings can not be changed. Only the work group
setting can be changed.
•
After settings have been completed, the reboot confirmation screen opens. Be sure to reboot the unit.
SONY
enable
192.168.1.10
255.255.255.0
0.0.0.0
Execute
Reset
Setting
Display only
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
Display only
Function
Display whether to acquire IP address automatically from the
DHCP server.
disable:
Does not acquire IP address automatically
enable:
Acquires IP address automatically
Sets the IP address.
Sets the subnet mask.
Sets the default gateway.
Success:
Setting has been changed.
Error:
Failed in correct setting.
37
Advertisement
Table of Contents
