Replacing The Interior Light Bulb; Adjusting The Feet; Door Open Warning - Beko DNE27000KLS User Manual
Hide thumbs
Also See for DNE27000KLS:
- User manual (23 pages) ,
- User manual (26 pages) ,
- Manual (59 pages)
Table of Contents
Advertisement
Replacing the interior light
bulb
Should the light fail to work switch
off at the socket outlet and pull out
the mains plug. Follow the below
instructions to check if the light bulb
has worked itself loose.
If the light still fails to work obtain a
replacement E14 screw cap type
15 Watt (Max) bulb from your local
electrical store and then fit it as
follows:
1. Switch off at the socket outlet and
pull out the mains plug. You may find
it useful to remove shelves for easy
access.
2. Remove the light diffuser cover as
shown in figure (a-b).
3. Replace the burnt-out light bulb.
4. Reassemble the light diffuser cover
as shown in figure (c).
"Push firmly to ensure cover is fitted
properly."
5. Carefully dispose of the burnt-out
light bulb immediately.
"Replacement light bulb can easily be
obtained from a good local electrical or
DIY store."
Adjusting the feet
If your refrigerator is unbalanced;
You can balance your refrigerator by
turning the front feet of it as illustrated
in the figure. The corner where the
leg exists is lowered when you turn
it the direction of black arrow and
raised when you turn in the opposite
direction. Taking help from someone to
slightly lift the refrigerator will facilitate
this process.
Door Open Warning
(This feature is optional)
An audio warning signal will be given
when the door of your product is
left open for at least 1 minute. This
warning will be muted when the door
is closed or any of the display buttons
(if any) are pressed.
12
EN
Advertisement
Table of Contents
