Page 1 Welcome Congratulations on your purchase of this Sony VAIO computer, and welcome to the online VAIO Computer User Guide. ® ® This user guide provides detailed information on all aspects of using your new VAIO computer, from keyboard functions to preinstalled software programs.
Page 2: Powering Your Computer
Powering Your Computer Your VAIO computer comes with a battery and an AC adapter. This chapter explains how to install and use these supplied ® accessories to power your computer. It also describes ways you can efficiently utilize the battery as a power source. Page 2...
Page 3: Using Ac Power
Using AC Power The supplied battery is not charged when you receive your computer. To charge the battery and begin using the computer immediately, insert the battery into the computer and use the supplied AC adapter as a power source. The computer automatically charges the installed battery while it uses AC power.
Page 4 Connecting the AC adapter To connect the AC adapter Plug the AC adapter cable into the DC IN port. Connecting the AC Adapter to the Com puter Plug the power cord into the AC adapter and an AC outlet. Use only the supplied AC adapter with your computer. Page 4...
Page 5 Turning on the computer To open and turn on the computer Slide the cover release latch and lift the cover while holding the bottom of the computer firmly. Opening the Com puter Press the power button until the power indicator turns on. Turning on the Com puter If you continue to press the power button, the computer turns off.
Page 6: Using The Battery
Using the Battery Your computer, depending on the model you purchased, may come equipped with one battery bay and one multipurpose bay that supports a second battery. If your computer comes with two bays, you can purchase a second rechargeable battery to extend your computing time.
Page 7 To insert and charge the battery Open the computer lid. Push the battery bay cover down to open it. The battery bay cover swings out but does not detach from the computer. Opening the Battery Bay Slide the battery (with the logo facing up) into the battery bay. If the computer is on, it automatically detects the battery.
Page 8 Using a second battery To insert a second battery If another device is in the multipurpose bay, remove that device by performing the following steps: Locate the release switch on the bottom of the computer. While holding the release switch in the Release position, pull out the device from the multipurpose bay.
Page 9 To remove the second battery Make sure the Battery 2 indicator is off and the Battery 1 indicator is on or the computer is connected to AC power. If the Battery 2 indicator is on: Double-click the CPU icon PowerPanel dialog box appears. On the Battery tab, click Primary Battery in the Battery Switch box.
Page 10: Conserving Battery Power
Conserving Battery Power You may use the power saving modes and PowerPanel utility to conserve battery power. Conserving battery power may significantly extend your computing time, depending on how you use your computer. Page 10...
Page 11 Using power saving modes In addition to the normal operating mode, which allows you to turn off specific devices to save power, your computer has two distinct power saving modes: Standby and Hibernate. Use the Standby and Hibernate power saving modes to override a power profile setting and initiate immediate action.
Page 12 Using PowerPanel utility The PowerPanel utility enables you to select and customize a predefined power management profile to conserve battery life. The following table describes all the predefined power management profiles in PowerPanel. You can customize the settings for all the following profiles, except the Disable Power Management profile. Profile Icon Description...
Page 13 Do not c hoos e the A utomatic P rofile Selec tion when c onnec ted to A C power. To select a profile Right-click the CPU icon information for Battery icon descriptions. Select Profiles, and click the profile on the shortcut menu. The profile settings are implemented instantly. See Using PowerPanel utility for descriptions of available profiles.
Page 14 Brightness Controls the brightness of the computer screen (LCD). You can select a brightness level of one to nine. The darker you set the computer screen the more power you conserve. LCD Standby Timer Controls the time it takes the system to turn off power to the computer screen (LCD) when the system is idle.
Page 15 Locating battery information You can view the remaining battery charge and miscellaneous battery information on the Battery Information toolbar, the PowerProfile window, and the Power Meter window. The Battery icons that appear on the Battery Information toolbar and PowerPanel window indicate the current status of the installed battery.
Page 16 * T he P owerP anel window may appear s lightly different on your c omputer, depending on the number of batteries your c omputer s upports .  Power Profile— Displays the power management settings for various devices on your system. You can change the settings to conserve power.
Page 17 To display the Power icon on the taskbar Click Start on the Windows ® Click Power Options. The Power Options Properties window appears. Select the Advanced tab, and then select Always show icon on the taskbar in the Options box. The power icon appears on the taskbar.
Page 18 Inserting a battery To insert a battery Lift the lid of the computer. Push the battery bay cover down to open it. The battery bay cover swings out but does not detach from the computer. Opening the Battery Bay Slide the battery into the battery bay. If the computer is on, it automatically detects the battery. Inserting a Battery Push the battery bay cover up until it clicks into place.
Page 19 Removing a battery If you are not using the computer for an extended period of time, remove the battery from the computer to avoid damaging the battery. Remove the battery when the computer is off. To remove a battery Make sure the computer is off. Push the battery bay cover down to open it.
Page 20 Charging a battery You will need to charge the battery if battery power drops below 10 percent or you have not used the battery for a long time. The lithium-ion battery supplied with your computer may be recharged at any time, whether you wait until the battery is completely or partially discharged.
Page 21 Notes on batteries  Never leave the battery in temperatures above 140°F (60°C), such as under direct sunlight or in a car parked in the sun.  While the battery is in use or being discharged, the battery heats up. This is normal and is not cause for concern. ...
Page 22: Using Special Buttons
Using Audio-Video Features Using Special Buttons Depending on the model you purchased, your VAIO computer is equipped with a variety of audio- and video-oriented ® function buttons: Volume Up and Down, and Magnify screen. Page 22...
Page 23 Using Audio-Video Features Using Special Buttons Depending on the model you purchased, your VAIO computer is equipped with a variety of audio- and video-oriented ® function buttons: Volume Up and Down, and Magnify screen. Page 23...
Page 24 About the special buttons The following information shows where the special buttons are located, and briefly describes their functionality. Special Buttons Number Type of Button Volume Down. The Volume Up and Down buttons control the audio output on your computer. Volume Up.
Page 25: Using I.link Digital Video Recorders
N K is a trademark of Sony us ed to des ignate that a produc t c ontains an I E E E 1 3 9 4 c onnec tor. T he i.LI...
Page 26 Connecting an i.LINK digital video recorder You can connect an i.LINK digital video (DV) recorder when the computer is on or off. Connecting the DV recorder when the computer is in a power saving mode (Standby or Hibernate) may cause the computer to malfunction. Before you connect an i.LINK digital video recorder ...
Page 27 Disconnecting the i.LINK digital video recorder You can disconnect the digital video recorder while the computer is on or off. Simply unplug the i.LINK cable from the i.LINK port on the computer. Disconnecting the cable when the computer is in a power saving mode (Standby or Hibernate) may cause the computer to malfunction.
Page 28 Using a digital video camera recorder Your computer comes with preinstalled driver software that is compatible with most Sony digital video camera recorders. If you purchased a camera that comes with its own driver software, install these drivers before you use the camera.
Page 29 Using Computer Monitors, Projectors, and TVs You can connect an external display (such as a computer monitor or a projector) to your computer. Page 29...
Page 30 Connecting a computer monitor Your computer can display images to the computer screen (LCD), to an external computer monitor, or to both the LCD and external monitor while your computer is on. To connect a computer monitor Make sure the computer monitor is plugged into an AC outlet. Plug the display cable into the Monitor (VGA) port If it is not already on, turn on the computer monitor.
Page 31 Connecting a multimedia device Connecting a Com puter Monitor You can connect a multimedia device, such as a multimedia computer monitor or projector, to your computer. Connecting a multimedia device enables you to display images on your computer screen (LCD), the multimedia device, or both. For information on connecting a TV to your computer, see To connect a multimedia computer monitor or projector Plug the device into an AC outlet.
Page 32 Press the Fn+F7 key combination to toggle the display between your computer, the monitor, or both. See Selecting a display for more information. See the guide that accompanied your projector for more information on its installation and use. Page 32...
Page 33 Connecting your computer to a TV Your computer is equipped with an A/V OUT jack, which enables you to connect your computer to a TV. To locate the A/V OUT jack on your computer, see the chapter of your printed VAIO Computer Quick Start.
Page 34 Selecting a display You can connect external displays to your computer while it is on. When you connect an external display (projector, computer monitor, or TV) to your computer, you can switch the display between the computer screen (LCD), the external display, or both, using shortcut keys.
Page 35 Disconnecting a computer monitor or projector You can disconnect the external computer monitor or projector by unplugging the monitor (VGA) cable from your computer's port. Disconnecting the external display when the computer is in a power saving mode (Standby or Hibernate) may cause the computer to malfunction.
Page 36: Using Speakers
Your computer comes with built-in stereo speakers. If you wish to enhance the sound quality of your computer, you can purchase and connect external speakers. If you want to purchase speakers, make sure the speakers are designed for computer use. You can shop Sony online at http://www.sonystyle.com/vaio or contact your local retailer.
Page 37 Connecting speakers You can connect speakers to your computer to enhance the sound quality of your computer. Do not place floppy disks on the speakers. The speakers' magnetic field may damage the data stored on the floppy disks. To connect speakers to your computer Turn down the volume of the speakers.
Page 38 Disconnecting speakers You can disconnect external speakers when the computer is on or off. Simply unplug the speaker cable from the Headphone jack on the computer. Page 38...
Page 39 Adjusting the volume To adjust the volume for playing CDs and DVDs, use the Volume icon Down buttons. Adjusting the volume for playing CDs or DVDs does not adjust the volume for recording sound files. You can only adjust the recording volume in the Recording Control window. See for instructions on how to open this window.
Page 40 Enabling the audio feature If you do not hear sound when playing a CD or DVD, you may need to enable the audio feature. To enable the audio feature Click Start on the Windows ® Click System. The System Properties window appears. Select the Hardware tab, and click Device Manager.
Page 41: Using Microphones
Using Microphones You can connect an external microphone to your computer to enhance the sound input to your computer. Make sure your microphone is designed for computer use. If you wish to purchase a microphone, shop Sony online at http://www.sonystyle.com/vaio or contact your local retailer.
Page 42 Connecting a microphone Plug the microphone cable into the Microphone jack on the computer. Connecting a Microphone A protruding dot loc ated next to the M ic rophone jac k dis tinguis hes this jac k from the H eadphone jac k. Page 42...
Page 43 Disconnecting a microphone You can disconnect an external microphone when the computer is on or off. Simply unplug the microphone cable from the Microphone jack on the computer. Page 43...
Page 44 Using a microphone to record sound You can record messages, memos, etc. by connecting a microphone to the Microphone jack To record from a microphone Double-click the Volume icon From the Options menu, click Properties. The Properties dialog box appears. Click to select the Recording option in the Adjust volume for box, and click OK.
Page 45: Vaio Av Applications
VAIO AV Applications Your VAIO computer is preconfigured with a collection of audio and video (AV) applications that make it easy to use ® advanced multimedia technology. This section describes the VAIO AV applications. ® Your computer may not be supplied with all of the software applications listed, depending on the system configuration you purchased.
Page 46: Overview Of Preinstalled Software
Sony Electronics Inc. PictureGear Studio still image management software displays still images from your hard drive or a Sony digital still camera. The still images appear in a convenient light-table format so that you can easily view the contents of an entire folder, create your own photo albums and make prints.
Page 47: Creating Dvds
Creating DVDs The information provided here applies to VAIO drive, along with the preinstalled DVD and CD burning software make it easy to create DVDs and CDs. For a listing of DVD and CD burning software preinstalled on your computer, see your online specifications sheet. The DVD-RW or DVD±RW drive and DVD creation software included with your VAIO and CDs.
Page 48 About DVD and CD Media, Formats, and Compatibility Use the information in this section as a guide to which type of blank recording media and which kind of playback equipment you can use with different disc formats.  Selecting DVD and CD media ...
Page 49 Selecting DVD and CD media Use the correct recording media for successful recording projects. DVDs and CDs look similar, but different formats have different capabilities. To increase compatibility with other playback equipment, use high-quality writable media. The table below indicates the appropriate media types for each kind of disc-recording project supported by your DVD-RW and DVD±RW drive.
Page 50  DVD-ROM Even with the proper type of media, the quality of manufacture and compatibility with different equipment varies from manufacturer to manufacturer and even from disc to disc from the same manufacturer. If you are confident you are using the proper type of disc for your project and you are having trouble recording information or playing a disc, try a different disc or a different brand of disc.
Page 51 Using Compatible Playback Equipment The table below gives a general idea of the compatibility of disc formats with different playback equipment. Compatibility between a specific disc and a specific kind of playback equipment cannot be guaranteed. Some older computer CD drives cannot read data CD-R and CD-RW discs.
Page 52 Appending Data to a Data DVD When creating a data DVD you can choose whether to keep the writing session open to make a disc appendable.  Appendable Writing With this option more data may be added to a disc as long as there is space available. The recording session stays open until the disc is full.
Page 53 Creating Data DVDs with Drag'n Drop CD+DVD Drag'n Drop CD+DVD brings a unique drag-and-drop approach to the creation of data CDs and DVDs and music CDs. Three icons, Music, DISC Backup, and Data are the interface for Drag'n Drop software. Just drag data files, music files, or a CD or DVD that you want to back up to the appropriate icon, insert a blank disc, and click the record button.
Page 54 Using Drag'n Drop CD+DVD Software To start Drag'n Drop CD+DVD Click Start in the Windows ® Point to Drag'n Drop CD+DVD, and click Drag'n Drop CD+DVD. Drag'n Drop CD+DVD starts, and the three Drag'n Drop CD+DVD icons (Music, DISC Backup, and Data) appear on your desktop.
Page 55 N K is a trademark of Sony us ed to des ignate that a produc t c ontains an I E E E 1 3 9 4 c onnec tion. T he i.LI...
Page 56 Editing Video with MovieShaker Software MovieShaker software can be used to create fun and innovative movies without any previous knowledge of film editing. In a few simple steps, video files can be created from video clips and still images with added special effects and music. This guide provides only a simple overview of using the MovieShaker software.
Page 57 triangles will appear in the final movie. To add professional-looking transitions between clips on the Story Board panel, click Transition at the right of the MovieShaker window to open the Transition tray, and drag a transition from the list to the space between two clips on the Story Board.
Page 58 Editing Video with DVgate Software DVgate software offers professional-level control over all aspects of capturing, trimming, and combining digital video clips from a compatible digital video (DV) camera. After you have combined your clips into a finished movie, you can export it back to your compatible digital video camera.
Page 59 You can select multiple clips by holding down the Ctrl key and clicking several files. Your selected clips appear in the Assemble list in the DVgate Assemble window. If necessary, edit the order of clips in the Assemble list. For the combined movie, clips are combined in the order they appear in the Assemble list, starting from the top. ...
Page 60 The ADD dialog box appears. In the ADD dialog box, select the movie file you want to export, and click Open. The ADD dialog box closes, and your selected movie appears in the Record list in the DVgate Motion - AVI file list window.
Page 61: Working With Still Images
Working with Still Images The Microsoft Windows 2000 operating system and the multimedia software preinstalled on your VAIO computer make it ® ® ® easy to import, edit, and print your photographs and other images. Page 61...
Page 62: Importing Still Images
Importing Still Images There are a variety of ways to bring still images into your computer. Which approach is right for you depends upon whether you have a digital camera or a traditional film camera.  Many digital cameras connect directly to your computer. The Microsoft Windows 2000 operating system already contains all the necessary software to import pictures from...
Page 63: Editing Still Images
Editing Still Images After you have gotten your images into your computer, you can use image-editing software to enhance them. You can perform traditional darkroom tasks such as resizing, cropping, and altering colors. You can also add creative touches such as painting on top of your photographs, adding text, or combining multiple photographs into one.
Page 64: Printing Still Images
Printing Still Images Many of today's inexpensive computer printers can print images as sharp and bright as professionally developed film photos. There are a variety of options for printing your digital images:  You can print most images directly from the Microsoft the image and clicking Print from the shortcut menu.
Page 65 CDs, and check music out to portable digital music devices, such as Net MD Music Players. SonicStage software employs Sony's OpenMG allow you to enjoy digital music while protecting the rights of copyright holders. You can enjoy digital music with SonicStage software in a wide variety of ways: ...
Page 66 Start SonicStage. On the Help menu, click SonicStage Help. To make a backup copy of an audio CD On computer models equipped with a CD recording device, you can use the Backing Up Audio CDs utility to make a backup copy of an audio CD.
Page 67: Dvgate Software
DVgate Software For detailed information about using DVgate Connecting a digital video camcorder Turn off the power to your digital video camcorder before connecting it to your computer. After connecting the device, turn its power back on. You do not need to turn off the computer when connecting the camcorder. DVgate software does not support MICROMV To use DVgate software with a digital video camcorder...
Page 68: Movieshaker Software
MovieShaker Software MovieShaker software can be used to create fun and innovative movies without any previous knowledge of film editing. In a few simple steps, you can turn a collection of video clips, still images, and audio files into a finished movie with special effects and music.
Page 69 Creating movies with MovieShaker software Using your imported clips, you can create a short movie using the Shake feature. The Shake feature selects clips from the Story Board tray, adds effects, and combines them randomly into a 30-second movie. After you "Shake" your video, you can edit it by adding effects and text, by adjusting the color and contrast, and by modifying its length.
Page 70 Double-click or drag the desired clip or scene to move it to the Story Board tray. Click the Effect button on the Effect tray. Effect tray window (Effect button selected) Drag the Effect icon you want to add from the Effect tray to the Effect palette on the Edit tray. Click the Play button on the Edit tray to preview the effect.
Page 71 Click the Play button on the Edit tray to preview the text effect. The clip displays the text effect in the Effect tray window. A preview of the added text and text effect is displayed in the Effects tray window. From the Edit tray, you can eliminate a text effect by dragging it from the Effect palette to the trash icon.
Page 72 Using the ImageStation online service with MovieShaker software ImageStation is an online service that allows you to store your pictures and movies on the Internet to share with family and friends. The ImageStation service requires an Internet connection and registration for the Web-based service. You must be connected to the Internet before uploading your pictures or movies using the MovieShaker software and ImageStation applications.
Page 73: Sonicstage Software
CDs and import digital audio files while maintaining copyright information. Taking advantage of Sony's copyright-protected ATRAC3 format for high-quality digital audio storage, SonicStage sports a music visualizer, a sleek player skin design, and a parametric equalizer for fine-tuning audio playback.
Page 74: Electronic Music Distribution (Emd) Services
Electronic Music Distribution (EMD) Services EMD enables you to download music files via the Internet. To use Internet services that are compatible with the SonicStage software, you need:  Access to the Internet from your computer. Sign up with an Internet Service Provider (ISP) and configure your computer for Internet access before using EMD services.
Page 75: Starting Sonicstage Software
Starting SonicStage Software Click Start in the Windows taskbar, and point to All Programs. Point to SonicStage, and click SonicStage. When you have registered with CDDB, the Confirm the setup of SonicStage... dialog box appears. Click Yes to continue. SonicStage feature tabs (Main window) ...
Page 76 Controls playback functions, such as play, pause, stop, fast forward, and reverse. You can increase or decrease volume and switch view modes. Internet address drop-down list (Playlist view) Displays Internet addresses associated with the currently selected song. Click Go to URL link to immediately connect to the Internet address displayed in the drop-down list.
Page 77: Recording From A Cd
Recording from a CD You can record songs from audio CDs and add them to playlists in SonicStage software. When you record from an audio CD from your optical disc drive for the first time, the CD Drive Optimization dialog box appears.
Page 78: Transferring Songs (Check-In/Check-Out)
Transferring songs (Check-In/Check-Out) You can transfer songs between the playlists in the SonicStage software and external devices or media. For more information on using your external devices or media, see the instructions supplied with the device or media. These instructions are for using the Check-In/Check-Out "1-step" method. For information on using another method, see "Changing the check-in/check-out settings"...
Page 79 To cancel Check In, click process. For more information about using SonicStage software, go to the online SonicStage Help. You can access the online help file as follows: Click the Start button in the Windows taskbar, and point to Programs. Point to SonicStage, and click SonicStage Help.
Page 80: Additional Features
Additional features  SonicStage Tutorial — SonicStage features are described in the Tutorial. The user-friendly interface instructs you on how to use all SonicStage features.  SonicStage Backup Tool — You can back up and restore music, graphics, and information data managed by SonicStage software.
Page 81: Network Smart Capture
N K is a trademark of Sony us ed only to des ignate that a produc t c ontains an I E E E 1 3 9 4 c onnec tion. T he i.LI...
Page 82 The Network Smart Capture main window Network Smart Capture opens with a pre-installed video clip in the Finder Window, indicating there is no data input from a digital camera or camcorder. When you connect your digital camera or camcorder to your system with an i.LINK turn it on, an image appears in the main window.
Page 83 12 Web Camera button 13 Movie Mode button 14 Still Mode button Captures still images according to specified settings Captures moving images Captures still images Page 83...
Page 84: Capturing Still Images
Capturing still images The following information tells you how to set preferences and capture a still image. To set Still mode preferences Open Network Smart Capture:  (Microsoft Windows XP) From the Start menu, click All Programs, Network Smart Capture, and click ®...
Page 85 Click the thumbnail images or arrows to the right of the Finder Window to view your captured images. As each image is captured, it appears in the Finder Window. Page 85...
Page 86 Capturing movie clips The following information tells you how to set preferences and capture movie clips. To set Movie mode preferences Open Network Smart Capture:  (Microsoft Windows XP) From the Start menu, click All Programs, Network Smart Capture, and click ®...
Page 87 Capturing Web camera images The following information tells you how to set preferences and capture an image. To set Web camera mode preferences Open Network Smart Capture:  (Microsoft Windows XP) From the Start menu, click All Programs, Network Smart Capture, and click ®...
Page 88 Applying effects to your images and movies You can add effects to real-time images or movies displayed in the Finder Window. You can also use a different effect for each picture. To open the Effect Setting window Click the Select Capture Window icon Click to select digital zoom, effect, or no effect from the list.
Page 89 Managing your images and movies The task buttons to the right of the Network Smart Capture window enable you to perform various functions with your images or movies.  Display Image — Opens captured images in the Finder Window.  Save As —...
Page 90 Using the ImageStation online service ImageStation is an online service that allows you to store your images and movies on the Internet to share with family and friends. The ImageStation service requires an Internet connection and registration for the Web-based service. You must be connected to the Internet before uploading your images or movies with Smart Capture and ImageStation programs.
Page 91: Getting More Help
Getting more help For more information about Network Smart Capture, see the program's online Help. To view the online help  (Microsoft Windows XP) From the Start menu, click All Programs, Network Smart Capture, and click Help from the ® ®...
Page 92 PictureGear Studio Software PictureGear Studio software is designed to creatively manage your digital pictures. With its easy-to-use features, you can quickly load images from your digital camera or camcorder, print high-quality photos, create custom labels, and design personalized photo albums or binders to share with friends and family. PictureGear Studio m ain window Photo albums, binders, and photo collections can only be viewed or edited using PictureGear Studio software.
Page 93 Using the Import Photo feature Capture and import the pictures from your digital camera or camcorder to your computer. You can select your favorite pictures and place them in handy folders for future use. Click Start in the Windows taskbar, and point to All Programs. Point to PictureGear Studio, and click PictureGear Studio.
Page 94 Click to make any desired adjustments to the pictures. The Adjust window displays an enlarged version of the picture on the right and thumbnail versions on the left.  Save to relocate the individual picture to a new folder.  Delete to remove the picture from the photo collection.
Page 95 Using the PhotoCollection feature You can organize and manage your imported pictures on your computer's hard drive or from your ImageStation Click PhotoCollection. A list of available photo sources is displayed on the left, with the selected source's contents displayed as thumbnail pictures on the right. PhotoCollection window From the thumbnail view, click to select pictures.
Page 96 Using the Binder feature You can add comments to your favorite photos, add custom backgrounds, clip art, and stamps, or showcase your own drawing talent. Add, remove, or change your designs to create your own unique photo art. Click Binder. A list of binder styles is displayed on the left. When you add your pictures to a binder, they are displayed as thumbnails on the right.
Page 97 Using the PhotoAlbum feature Organize your memorable photos in an electronic photo album. You can share your custom photo albums with friends and family. Click PhotoAlbum. PhotoAlbum window Click New Album. The Select Photo area appears. If you want to work on a previously created album, do not click Create New Album. Instead, select the desired album from the Album Collection view on the right side of the window.
Page 98 Click to select a design layout for your album. Use the scroll bar to view all available album designs. A Select Layout window appears. Select Layout window Click to select a page layout for your album. Use the scroll bar to view all available layout designs. A preview of your selected design and page layout is displayed.
Page 99 Click Edit Album to make changes to your album. Customize your album by adding more pictures, pages, decorations, or comments, or by deleting pages. Click Edit Page to customize a page in your album. You can customize with your own drawing, stamps or other decorations.
Page 100 Click to select an export format. A Select Folder window appears. Select Folder window Click Browse and navigate to the destination folder. Enter a file name, if desired. Click Export. A progress window appears briefly. Finish Exporting window An export completion message window appears, displaying the file name and file size. Click Return to Edit Album Screen.
Page 101 Using the PrintStudio feature Use PrintStudio to design original postcards, calendars, art, and labels using your favorite pictures. Click PrintStudio. The PrintStudio window appears. PrintStudio window Select the item you want to create and click Start Creating. The initial creation window appears. The initial window varies, depending on the item you are creating.
Page 102: Legal Information
The software described herein is governed by the terms of a separate user license agreement. This product contains software owned by Sony and licensed by third parties. Use of such software is subject to the terms and conditions of license agreements enclosed with this product. Some of the software may not be transported or used outside the United States.
Page 103: Internet And Network Connections
Connection Wizard guides you through the process of connecting to the Internet and choosing an Internet service provider (ISP) or setting up an existing account. When you connect to the Internet, you can register your VAIO computer, use online ® services, and gain access to Sony Computing Support. Page 103...
Page 104 Connection Wizard guides you through the process of connecting to the Internet and choosing an Internet service provider (ISP) or setting up an existing account. When you connect to the Internet, you can register your VAIO computer, use online ® services, and gain access to Sony Computing Support. Page 104...
Page 105 Setting up a dial-up Internet connection Before you can connect to the Internet, you need to connect your computer to a telephone line via a telephone cable (not supplied). Once you set up your telephone cable, you're ready to connect to the Internet. To connect a telephone cable Locate the Modem jack on your computer.
Page 106 Setting up an Ethernet Internet connection Your computer accommodates both 10BASE-T and 100BASE-TX Ethernet connections, with data transfer speeds of between 10 and 100 Mbps. To connect an Ethernet cable Locate the Ethernet port on your computer. For location information, see the illustration.
Page 107 Customizing your Internet connection The Internet Properties dialog box enables you to change the way you view the Internet. You can change your home page, fonts, language, and colors. You can also regulate content and set browsing preferences. To open the Internet Properties dialog box Click Start on the Windows ®...
Page 108: Network Connections
Network Connections With a Sony computer, you can easily set up or connect to a variety of networks. The Internet Connection Wizard and Dial-Up Connections make it easy to gain access to networks (LANs) using wireless, Ethernet, or dial-up connections.
Page 109 Using Ethernet and dial-up connections For setting up local area networks (LANs), Ethernet is a widely installed technology. Your computer accommodates both 10BASE-T and 100BASE-TX Ethernet connections, with data transfer speeds of between 10 and 100 Mbps. To connect to a local area network using a telephone or Ethernet cable Connect an Ethernet or telephone cable to your computer.
Page 110 A wireless local area network (LAN) is a network in which you can connect to a LAN through a wireless (radio) connection. You can opt to purchase a Sony Wireless LAN Access Point to set up a LAN. The wireless LAN access point is designed for building a wireless LAN environment. Because a wireless LAN configuration requires no wiring, you can operate multiple computers more freely than ever before.
Page 111 Type a name in the Profile Name box. In the Transmission Rate box, make sure Fully Auto is selected. By selecting Fully Auto, your computer automatically searches for the strongest (radio) signal. In the ESSID box, type the name of the access point or click Scan to select an access point. Select a Power Save option.
Page 112 Checking your network connection status To check the status of your network connection Click the Wireless LAN Utility icon Click the Profile tab. Click Radio On/Off. The Link Quality and Signal Strength boxes show the connection status. Start to open the Wireless LAN Card Utility for Windows dialog box. Page 112...
Page 113: Inserting And Ejecting Cds Or Dvds
CDs and DVDs Inserting and Ejecting CDs or DVDs Avoid using adhesive labels to identify your CDs or DVDs. Adhesive labels may damage the optical drive if they come off while the disc is in the drive. To insert a disc Turn on the computer or exit a power saving mode (Standby or Hibernate) if one is active.
Page 114 If the Eject button does not work, turn off the computer and insert a thin, straight object (such as a paper clip) into the manual eject hole next to the Eject button. Lift the disc from the drive. Push the drive tray gently to close it. Page 114...
Page 115 CDs and DVDs Inserting and Ejecting CDs or DVDs Avoid using adhesive labels to identify your CDs or DVDs. Adhesive labels may damage the optical drive if they come off while the disc is in the drive. To insert a disc Turn on the computer or exit a power saving mode (Standby or Hibernate) if one is active.
Page 116 If the Eject button does not work, turn off the computer and insert a thin, straight object (such as a paper clip) into the manual eject hole next to the Eject button. Lift the disc from the drive. Push the drive tray gently to close it. Page 116...
Page 117 Copying and Playing CDs and DVDs Your computer plays and records CDs and DVDs, depending on the model you purchased. Check your computer specifications for the type of optical drive installed on your computer and use the table below to see which types of media your optical drive supports.
Page 118 Playing CDs Before you play an audio CD, you may need to enable your computer's audio feature. To enable the audio feature Click Start on the Windows ® Properties dialog box appears. As a shortcut, you can press Fn + Windows key Select the Hardware tab, and in the Device Manager box, click Device Manager.
Page 119 Copying files to CDs Before you copy files to a CD-RW or CD-R disc, read the following notes to avoid a computer malfunction and ensure the best results:  Deactivate the screen saver and exit anti-virus software.  Deactivate memory-resident disc utilities to avoid data loss. ...
Page 120 Playing DVDs You can play DVDs in your computer's optical drive and view the video on your LCD screen or on a TV. Page 120...
Page 121 Connecting your computer to a TV Your computer is equipped with an A/V OUT jack, which enables you to connect your computer to a TV. To locate the A/V OUT jack on your computer, see "Locating Controls and Ports" in the "Setting Up" chapter of your printed VAIO Quick Start.
Page 122 Playing DVDs on a TV To play a DVD Close all open programs. Disable the screen saver and the virus checker. If you are using battery power, set the power management profile to DVD. Follow these steps: Close all open programs. Right-click the CPU icon Notification area.
Page 123 Disconnecting your computer from a TV Simply unplug the audio-video (AV) cable from the A/V OUT jack on the computer. Page 123...
Page 124 Playing DVDs on your computer Your computer is equipped with an optical drive that enables you to watch DVDs and most DVD-R discs on your computer. To play a DVD while using AC power Close all open programs. Insert the DVD into the optical drive. Open a preinstalled DVD program, such as InterVideo WinDVD, by following these steps: Click Start on the taskbar, and point to Programs.
Page 125 Copying files to DVDs (on selected models only) Use the table shown on Copying and Playing CDs and DVDs To copy files to a DVD-R or DVD-RW Connect the AC adapter to the computer. See Insert the disc into the optical drive. See Click Start, Programs, and select the DVD software program you want to use from the submenu.
Page 126: Computer Features
Computer Features Using the Touch Pad A pointing device called a touch pad is located in front of the keyboard. You can point to, select, drag, and scroll objects on the screen using the built-in touch pad. Page 126...
Page 127 Computer Features Using the Touch Pad A pointing device called a touch pad is located in front of the keyboard. You can point to, select, drag, and scroll objects on the screen using the built-in touch pad. Page 127...
Page 128 Describing the touch pad Locating the Touch Pad Touch Pad Action Description Sliding one finger Equivalent to using a mouse to place the pointer on an item. Tapping once Equivalent to pressing the left button once. Tapping twice Equivalent to pressing the left button twice. Sliding one finger while pressing the left button Moving your finger along the right edge of the touch pad only with programs that support a touch pad scroll feature.)
Page 129: Using Memory Stick Media
Using Memory Stick Media Your VAIO computer is equipped with a Memory Stick slot that supports certain types of Memory Stick media. ® ® ® Page 129...
Page 130 MG Memory Stick media to store and transfer any data created with SonicStage or OpenMG software. Visit the Sony Computing Support Web site at http://www.sony.com/pcsupport regularly for the latest information on the new Memory Stick PRO media.
Page 131 Inserting Memory Stick media Before using Memory Stick media, back up important data. The media slot accommodates only one Memory Stick media at a ® time. To insert Memory Stick media Insert the Memory Stick media with the arrow facing up and toward the Memory Stick media slot. Inserting the media in the wrong direction may damage the connector pins.
Page 132 Depending on the model you purchased, the Sony Memory Stick window may appear when you insert a Memory Stick media. From this window, you can choose to view, print, copy or organize your Memory Stick images or data. If the Sony...
Page 133 Write-protecting Memory Stick media Memory Stick media is designed with a write-protect tab to protect data from accidental erasure or overwriting. Move the ® tab to the right or left to set or release write-protection. When the write-protect tab of the Memory Stick media is set to LOCK, data cannot be recorded or erased.
Page 134 Formatting Memory Stick media Memory Stick media is formatted for immediate use when you purchase it. If you need to reformat Memory Stick media, use ® the Memory Stick Formatter that is provided with the media. For more information about using Memory Stick Formatter, refer to Formatter Help.
Page 135 Removing Memory Stick media If the Memory Stick media is removed prematurely, a blue screen with a message may appear prompting you to continue or ® exit. Reinsert the media into the slot and press Enter to continue. This enables the media to finish reading or writing data. To remove Memory Stick media Wait a minimum of 10 seconds after the Memory Stick media finishes reading or writing data before removing the media.
Page 136: Using Pc Cards
Using PC Cards Your computer includes one or more PC Card slots. A PC Card enables you to connect devices such as an optical drive, floppy disk drive, or Network Interface Card (NIC). See your VAIO Computer Specifications for the type of PC Card that is compatible with your computer. These slots are ®...
Page 137 Inserting PC Cards To insert a PC Card Make sure the front label of the PC Card is facing up. Push the PC Card gently into the slot. The system automatically detects the PC Card. If the Found New Hardware Wizard appears, follow the on-screen instructions to complete the installation process.
Page 138 Removing PC Cards You can remove PC Cards while the computer is on or off. PC Cards draw power from the computer when they are inserted into the PC Card slot, whether or not you use the card. If you are not using your PC Card and you are using a battery as a power source, remove the PC Card from the PC Card slot to conserve battery power.
Page 139: Printer Connections
Printer Connections Your computer is compatible with many popular printers. However, to ensure the best performance, printers must be compatible with the Microsoft Windows operating system installed on your computer. ® ® Page 139...
Page 140: Connecting A Usb Printer
Connecting a USB Printer You can connect a universal serial bus (USB) printer to your computer. The new hardware wizard enables you to easily install the printer software, but some printers require separate driver software installation. See the instructions that accompanied your printer for more information.
Page 141: Disconnecting A Printer
Disconnecting a Printer You can disconnect the printer cable when the computer is on or off. Disconnecting a printer when the computer is in a power saving mode (Standby or Hibernate) may cause the computer to malfunction. To disconnect a printer ...
Page 142: Connecting A Parallel Printer
Connecting a Parallel Printer You can connect a parallel port printer to your computer or port replicator, if applicable. The new hardware wizard enables you to easily install the printer software, but some printers require separate driver software installation. See the instructions that accompanied your printer for more information.
Page 143: Port Replicators
A port replicator is a device that attaches to your notebook and contains additional jacks and ports, such as USB ports. A port replicator may come with your computer, depending on the model you purchased. If you wish to purchase a port replicator, shop Sony online at http://www.sonystyle.com/vaio The printer port on this port replicator is intended for printer connections only.
Page 144 A port replicator is a device that attaches to your notebook and contains additional jacks and ports, such as USB ports. A port replicator may come with your computer, depending on the model you purchased. If you wish to purchase a port replicator, shop Sony online at http://www.sonystyle.com/vaio The printer port on this port replicator is intended for printer connections only.
Page 145: Connecting A Port Replicator
Connecting a Port Replicator You can connect a port replicator to the computer while the computer is off. Use the AC adapter (not the battery) to power the computer while it is connected to a port replicator. Moving the computer with the port replicator attached could disconnect the AC adapter or power cord, and may cause the computer to lose power or malfunction.
Page 146 Securing a Port Replicator Make sure the port replicator is securely fastened to the computer. Turn on the computer. Page 146...
Page 147 Disconnecting a Port Replicator To disconnect a port replicator Close any active programs to prevent data loss. Turn off the computer and disconnect the power cord. Pull the release latches on each side of the port replicator to release the computer from the port replicator. Releasing a Com puter from a Port Replicator Lift the computer away from the port replicator.
Page 148: Using The Keyboard
Mice and Keyboards Using the Keyboard Although your computer's keyboard is very similar to a typewriter's keyboard, you can use the additional keys on the computer's keyboard to perform specific computer-related tasks. Page 148...
Page 149 Mice and Keyboards Using the Keyboard Although your computer's keyboard is very similar to a typewriter's keyboard, you can use the additional keys on the computer's keyboard to perform specific computer-related tasks. Page 149...
Page 150 Keyboard descriptions Description The numeric keypad contains the keys found on a typical calculator. Use the numeric keypad to type numbers or perform mathematical calculations, such as addition and subtraction. Numbers appear on the front beveled edge of the numeric keys. Press the Num Lock key to activate the numeric keypad. (When you do so, the Num Lock indicator light turns on.) Press the Num Lock key again to deactivate the numeric keypad.
Page 151 Windows key combinations Key combination Function Displays the VAIO Help and Support Center window. +Tab Switches the selected button on the taskbar. Displays the desktop. Displays the My Computer window. Displays the Search Results window, where you can find a file or folder. This is the equivalent of selecting Search from the Start menu.
Page 152 Indicator lights Indicator Function Power Turns on when the power to the computer is on, blinks in Standby mode, and turns off when the computer is in Hibernate mode or off. Battery Turns on when the computer is using battery power, blinks when the battery is running out of power, double-blinks when the battery is charging.
Page 153 Fn key combinations Key combination Function Fn+F3 Toggles the built-in speakers off and on. Fn+F4 Adjusts the built-in speaker volume. An on-screen display appears notifying you when a change occurs. To increase volume, press the Fn+F4 keys and then press the To decrease volume, press the Fn+F4 keys and then press the Fn+F5 Adjusts the brightness of the computer screen (LCD).
Page 154 Connecting External Mice and Keyboards Your computer is compatible with many popular mice and keyboards. To function properly, the device you connect must be compatible with the Microsoft Windows operating system installed on your computer. ® ® Page 154...
Page 155 Connecting a mouse or keyboard If you connect the mouse or keyboard when the computer is on, you may need to restart the computer for it to recognize the device. To connect a USB mouse or keyboard to your computer Plug the USB cable into the USB port printed VAIO Computer Quick Start.
Page 156 Disconnecting a mouse or keyboard You can disconnect a USB or PS/2 mouse or keyboard when the computer is on or off. Disconnecting the mouse or keyboard when the computer is in a power saving mode (Standby or Hibernate) may cause the computer to malfunction. To disconnect a mouse or keyboard ...
Page 157: Memory Upgrades
Memory Upgrades Before you upgrade your computer's memory, make sure you read the safety information in For the type of module and amount of memory installed on your computer, see the Computer Specifications. Precautions and Procedures. Welcome page to view the VAIO ®...
Page 158: Precautions And Procedures
Precautions and Procedures Sony recommends that memory upgrades be performed by an authorized Sony Service Center. To find the nearest center or agent, go to: http://www.sony.com/pcsupport. The procedures described below assume familiarity with the general terminology associated with personal computers and with the safety practices and regulatory compliance required for using and modifying electronic equipment.
Page 159: Removing And Installing Memory Modules
Removing and Installing Memory Modules Make sure you read the safety information in When installing a memory module, do not open the module package until you are ready to install it. The package protects the module from Electrostatic discharge (ESD). For memory upgrades and information about which memory modules to use, refer to your VAIO To remove a memory module Turn off the computer and all attached devices.
Page 160 Push the module down until it snaps into place. When the module is correctly seated, close the memory bay. Replace the fastening screw(s) on the memory bay. Make sure the system recognizes the new memory module. See information. Confirming Added Memory Capacity for more Page 160...
Page 161: Confirming Added Memory Capacity
Click Start on the Windows ® Select Sony Notebook Setup from the submenu. The Sony Notebook Setup dialog box appears. On the About This Computer tab, make sure the System Memory displayed in the System Information box matches the amount of memory installed.
Page 162: Using A Floppy Disk Drive
Floppy Disk Drives Using a Floppy Disk Drive You can connect a floppy disk drive to your computer. The floppy disk drive enables you to read or write data to a floppy disk. Page 162...
Page 163 Floppy Disk Drives Using a Floppy Disk Drive You can connect a floppy disk drive to your computer. The floppy disk drive enables you to read or write data to a floppy disk. Page 163...
Page 164 Connecting a floppy disk drive You can connect a floppy disk drive when your computer is on or off. Connecting the drive when the computer is in a power saving mode (Standby or Hibernate) may cause the computer to malfunction. To connect a USB floppy disk drive Close any active programs to prevent data loss.
Page 165 Inserting and removing floppy disks To write data to a disk, use one that is not write-protected or disable the write-protect feature. The floppy disk drive cannot write data to a disk if it is inserted into the drive improperly. To insert a floppy disk Hold the floppy disk with the label facing up.
Page 166 Protecting floppy disks  Do not open the shutter manually or touch the surface of the floppy disk.  Keep floppy disks away from magnets, direct sunlight, and heat sources. Page 166...
Page 167 Disconnecting a floppy disk drive You can disconnect a USB floppy disk drive when the computer is on or off by simply disconnecting the USB cable from the computer. Disconnecting the drive when the computer is in a power saving mode (Standby or Hibernate) may cause the computer to malfunction.
Page 168 Storing a floppy disk drive Fold the floppy disk drive cable and connector into the side compartment on the floppy disk drive. Storing a Floppy Disk Driv e Page 168...
Page 169: Using The Application Recovery And System Recovery Cds
Using the Application Recovery and System Recovery CDs (For Windows 2000 models only) You can restore your system, individual programs, or drivers, using the Application ® Recovery and System Recovery CDs. Page 169...
Page 170: Application And System Recovery Cds
CDs. If your computer does not come with an optical drive, use an external optical drive. Application Recovery CDs Sony Electronics Inc. These CDs enable you to reinstall individual programs and device drivers if they become corrupted or are erased.
Page 171: Using Your Recovery Cds
Using Your Recovery CDs The following sections describe how to use the Application Recovery and System Recovery utilities. Page 171...
Page 172 Insert Application Recovery CD No. 1 into your computer's optical drive. The VAIO welcome window appears. Click OK, then click Quit to close the Sony Application Recovery utility. (Leave the CD in the optical drive.) Click Start on the Windows ®...
Page 173 17. Wait 30 seconds, and turn on your computer. If you have any questions about using the Application Recovery CD(s), visit http://www.sony.com/pcsupport. U nknown devic es are identified by a yellow ques tion mark. A devic e that has a driver problem is identified by a yellow exc lamation mark.
Page 174 Press the disc eject button to open the optical disc drive and extend the disc tray. Insert the Sony System Recovery CD No. 1 into the optical drive, and close the drive. The first CD must be in the drive before you restart your computer.
Page 175 Press the power button and hold it for more than four seconds to turn off the computer. Turn on the computer. When the Sony logo is displayed, press the F2 key. The BIOS Setup Utility appears. Press the right arrow key Press the down arrow key appears.
Page 176: Troubleshooting
Troubleshooting Computer What do I do if my computer won't start?  Make sure the computer is securely plugged into a power source and turned on. Make sure the power indicator shows the power is on.  Make sure the battery is inserted properly and charged. ...
Page 177 Troubleshooting Computer What do I do if my computer won't start?  Make sure the computer is securely plugged into a power source and turned on. Make sure the power indicator shows the power is on.  Make sure the battery is inserted properly and charged. ...
Page 178 Troubleshooting Computer What do I do if my computer won't start?  Make sure the computer is securely plugged into a power source and turned on. Make sure the power indicator shows the power is on.  Make sure the battery is inserted properly and charged. ...
Page 179 Select Exit (Save Changes), and press Enter. The Setup Confirmation window appears again. Select Yes, and press Enter. The computer restarts. If this occurs on a regular basis, contact Sony Computing Support (http://www.sony.com/pcsupport). to select System Time, and then set the time (hour: minute: second). Press...
Page 180 Turn off the computer. Remove any peripheral devices connected to the computer. Restart the computer. Press the F2 key when the Sony logo appears. The BIOS Setup window appears. Press the Right Arrow key Press the Down Arrow key SETUP items appears.
Page 181 Why does my computer stop responding? Why can't I turn off my computer? It is best to turn off your computer using the Turn Off Computer option on the Microsoft the taskbar. Using other methods, including those listed below, may result in loss of unsaved data. ...
Page 182 Why won't my computer enter Standby or Hibernate mode? Your computer may become unstable if the operating mode is changed before the computer completely enters Standby or Hibernate. To restore the computer to normal operating stability: Close all open programs. Restart the computer.
Page 183 Why does the System Properties dialog box display a slower CPU speed than the maximum? This is normal. Because your computer's CPU utilizes a type of CPU speed controlling technology for power conservation purposes, System Properties may display the CPU's current speed instead of the maximum speed. Page 183...
Page 184 Why don't my changes appear on the computer screen (LCD)? You may need to refresh the computer screen. Press and hold the Windows key , and press D twice. Page 184...
Page 185 Battery How do I know when the battery is charged? To determine the remaining battery charge, see Locating battery information. Page 185...
Page 186 Battery How do I know when the battery is charged? To determine the remaining battery charge, see Locating battery information. Page 186...
Page 187 When is the computer using AC power? When the computer is directly connected to the AC adapter, it uses AC power, even if a battery is installed. Page 187...
Page 188 When should I recharge the battery?  When the battery level falls below 10 percent.  When both the battery and power indicators blink.  When you have not used the battery for a long time. Page 188...
Page 189 When should I replace the battery? If the battery power is still low after charging it, the battery may be reaching the end of its life and should be replaced. Page 189...
Page 190 Should I be concerned that the installed battery is warm? No, it is normal for the battery to be warm when it is powering the computer. Page 190...
Page 191 Can my computer enter Hibernate mode while using battery power? Your computer can enter Hibernate mode while using battery power, but some software programs and peripheral devices prevent the system from entering Hibernate mode. If you are using a program that prevents the system from entering Hibernate mode, save your data frequently.
Page 192 Make sure the telephone cable is working. Plug the cable into an ordinary telephone and listen for a dial tone.  Make sure the telephone number the program is dialing is correct.  Make sure the software you are using is compatible with the computer's modem. (All preinstalled Sony programs are compatible.) Page 192...
Page 193 Make sure the telephone cable is working. Plug the cable into an ordinary telephone and listen for a dial tone.  Make sure the telephone number the program is dialing is correct.  Make sure the software you are using is compatible with the computer's modem. (All preinstalled Sony programs are compatible.) Page 193...
Page 194 Why is my modem connection slow? Your computer is equipped with a V.90 compatible modem. Many factors may influence modem connection speed, including telephone line noise or compatibility with telephone equipment, such as fax machines or other modems. If you think your modem is not connecting properly to other PC-based modems, fax machines, or your Internet Service Provider (ISP), follow these steps: ...
Page 195 Networking Why can't my computer connect to a wireless LAN access point?  Connection availability is affected by distance and obstructions. You may need to move your computer away from obstructions or closer to any access point you may be using. ...
Page 196 Networking Why can't my computer connect to a wireless LAN access point?  Connection availability is affected by distance and obstructions. You may need to move your computer away from obstructions or closer to any access point you may be using. ...
Page 197 Why can't I access the Internet?  Check the access point settings. Refer to the instructions supplied with the access point.  Make sure your computer and the access point are connected to one another.  Move your computer away from obstructions or closer to any access point you may be using. ...
Page 198 Why is the data transfer speed slow?  The wireless LAN data transfer speed is affected by distance and obstructions between devices and access points. Other factors include device configurations, radio conditions, and software compatibility. To maximize the data transfer speed, move your computer away from obstructions or closer to any access point you may be using. ...
Page 199 Why is the communication speed interrupted or slowed down when MPEG2 data is transferred? The typical effective data transfer speed via an access point is 4-5 Mbps when adhering to the IEEE 802.11b standard. High-rate stream transfers with MPEG2 data may lower this rate. Page 199...
Page 200 How do I avoid data transfer interruptions?  When your computer is connected to an access point, data transfer interruptions may occur when using large files or if the computer is in close proximity to microwaves and cordless telephones.  Move the computer closer to the access point.
Page 201 Can I connect to an IEEE 802.11a device? Computers with built-in wireless LAN support the IEEE 802.11b standard only. Devices connecting to a wireless LAN using the IEEE 802.11a standard cannot connect to devices using the IEEE 802.11b standard. Page 201...
Page 202 Wireless LAN communication occurs on divided frequency bands known as channels. Third-party wireless LAN access point channels may be preset to different channels from Sony devices. If you are using a wireless LAN access point, refer to connectivity information contained in your access point instructions.
Page 203 Microphone Why doesn't my microphone work? If you are using an external microphone, make sure the microphone is turned on and is properly plugged into the Microphone jack on the computer. Page 203...
Page 204 Microphone Why doesn't my microphone work? If you are using an external microphone, make sure the microphone is turned on and is properly plugged into the Microphone jack on the computer. Page 204...
Page 205 Mouse What do I do if the computer doesn't recognize the mouse?  Make sure the mouse is securely plugged into the port.  Restart the computer with the mouse connected to the computer. Page 205...
Page 206 Mouse What do I do if the computer doesn't recognize the mouse?  Make sure the mouse is securely plugged into the port.  Restart the computer with the mouse connected to the computer. Page 206...
Page 207 What do I do if the pointer doesn't move when I use the mouse?  Make sure another mouse is not installed.  If you are playing a disc, press the Ctrl+Alt+Delete keys simultaneously to stop playback and restart the computer. ...
Page 208 Speakers Why won't my speakers work?  Make sure the speakers are properly connected and the volume is turned up loud enough to hear sound.  Your speakers may not be designed for computer use.  If the speakers have a mute button, set the button to off. ...
Page 209 Speakers Why won't my speakers work?  Make sure the speakers are properly connected and the volume is turned up loud enough to hear sound.  Your speakers may not be designed for computer use.  If the speakers have a mute button, set the button to off. ...
Page 210 Why can't I hear sound from my speakers?  If the computer is using battery power, make sure the battery is properly inserted and is charged.  If you are using a program that has its own volume control, make sure the volume control is properly set. See that program's help guide for more information.
Page 211 Why don't the Fn+F3 or the Fn+F4 key combinations work? The Fn+F3 keys toggle the built-in speakers on and off. The Fn+F4 keys adjust the built-in speaker volume. The computer may not recognize the Fn+F3 and Fn+F4 keys if the correct speakers are not selected. Follow these steps: Right-click the Volume icon Properties dialog box opens.
Page 212 Why do I hear noise distortion while listening to music with speakers or headphones? You may experience noise distortion while listening to music with speakers or headphones if the CPU control is set to Automatic Profile Selection. If your computer is using battery power, use the preinstalled PowerPanel program to set the CPU control to Maximum Performance.
Page 213 Touchpad What do I do if the touch pad does not work?  Try restarting your computer. Follow these steps: Press the Windows key Press U. The Shut Down Windows dialog box opens. Press R to restart the computer, and press Enter. ...
Page 214 Touchpad What do I do if the touch pad does not work?  Try restarting your computer. Follow these steps: Press the Windows key Press U. The Shut Down Windows dialog box opens. Press R to restart the computer, and press Enter. ...
Page 215: Cds And Dvds
CDs and DVDs How do I maintain CDs and DVDs?  Avoid touching the surface of the disc with your fingers. Fingerprints and dust on the surface of the disc may cause reading errors.  Try using canned compressed air to clean dusty discs. ...
Page 216 CDs and DVDs How do I maintain CDs and DVDs?  Avoid touching the surface of the disc with your fingers. Fingerprints and dust on the surface of the disc may cause reading errors.  Try using canned compressed air to clean dusty discs. ...
Page 217 Why does my computer freeze when I try to read a disc?  The disc your computer is trying to read may be dirty or damaged. Follow these steps: Restart the computer by clicking Start, Shut Down, and Restart. Eject the disc from the optical drive. Examine the disc for dirt or damage.
Page 218 What do I do if the drive tray won't open?  Make sure the computer is on.  Press the Eject button on the optical drive.  If the Eject button does not work, click My Computer on the Windows and select Eject from the shortcut menu.
Page 219 What do I do if the optical drive isn't playing my CD or DVD properly?  Make sure the disc was inserted into the drive with the label facing up.  Make sure the necessary program(s) is installed according to the manufacturer's instructions. ...
Page 220 Why did the computer screen (LCD) go blank?  Your computer screen may go blank if the computer has lost power or has entered a power saving mode (Standby or Hibernate). If the computer is in LCD (Video) Standby mode, press any key to activate the computer screen. See Using power saving modes for more information.
Page 221 Why can't I view the entire DVD video display on a TV screen? The display resolution may not be properly set. To adjust the display resolution, see Selecting a display for more information. It is recommended that you adjust the display resolution to 1024 x 768 or smaller, depending on the size of the external display screen.
Page 222 How do I adjust the image on the TV screen? Use the controls on your external display to adjust the image. See the help guide that accompanied your display for more information. Page 222...
Page 223 How do I change the video resolution on the TV screen? The video may not appear on the entire TV screen if your computer resolution is set larger than 1024 x 768. Adjust the video resolution to 1024 x 768 or smaller. If you are using the A/V Out jack, plug the audio-video (AV) cable into the computer before you start the computer.
Page 224 How do I switch the computer screen (LCD) from LCD to TV? Press the Fn+F7 keys to view the image on either the computer screen (LCD) or the TV. See Selecting a display for more information. The Fn+F7 key combination will not work once a DVD is inserted into the optical drive. Switching the display while a DVD is playing may cause the computer to malfunction, and you may need to restart the DVD software.
Page 225: Memory Stick
Memory Stick Why can't I open my image files? You may need to reformat your Memory Stick media. Formatting Memory Stick media erases all data, including music data, previously saved to it. Before you reformat Memory Stick media, back up important data and confirm that the media does not contain files you want to keep.
Page 226 Memory Stick Why can't I open my image files? You may need to reformat your Memory Stick media. Formatting Memory Stick media erases all data, including music data, previously saved to it. Before you reformat Memory Stick media, back up important data and confirm that the media does not contain files you want to keep.
Page 227 Copyright protected music cannot be checked out to any Memory Stick media other than MG Memory Stick media.  Using recorded music requires permission of the copyright holders.  Sony is not responsible for music files that cannot be recorded from a CD or downloaded from other sources. Page 227...
Page 228 Can I copy images from a digital video camera using Memory Stick media? Yes, and you can view video clips that you have recorded with Memory Stick media-compatible video camera recorders. Page 228...
Page 229 How do I prevent damage to the Memory Stick media?  Do not use the media in locations that are subject to static electricity or electrical noise.  Do not touch the media connector with your finger or metallic objects. ...
Page 230 How do I extend the life of the Memory Stick media?  Use the supplied storage case. See the instructions that came with your media for more information on its use.  Do not use or store the media in a location that is subject to: ...
Page 231 Make sure the PC Card is compatible with the Microsoft  See the instructions that accompanied your PC Card. You may need to install driver software if you are not using a Sony PC Card. Inserting PC Cards for more information.
Page 232 Make sure the PC Card is compatible with the Microsoft  See the instructions that accompanied your PC Card. You may need to install driver software if you are not using a Sony PC Card. Inserting PC Cards for more information.
Page 233 Why doesn't my computer recognize attached devices? For some PC Cards, if you alternate between normal power operation and the Standby or Hibernate modes while the card is inserted into the PC Card slot, the computer may not recognize the PC Card or the connected device. Restart your computer.
Page 234 Why can't I insert my PC Card?  Make sure you are inserting the card correctly. See  You may not be able to use some PC Cards or some functions of the PC Card with this computer. Check the guide that accompanied your PC Card for more information on its use.
Page 235 Why does an exclamation mark (!) appear on the Device Manager tab in the System Properties dialog box?  The exclamation mark indicates there is a problem with the specified device. Make sure all cable and power connections are secure. ...
Page 236 Printing Why can't I print a document?  Make sure the printer is on, and the printer cable is securely connected to the ports on your printer and computer.  Make sure the printer is compatible with the Microsoft  You may need to install the printer driver software before you use the printer.
Page 237 Printing Why can't I print a document?  Make sure the printer is on, and the printer cable is securely connected to the ports on your printer and computer.  Make sure the printer is compatible with the Microsoft  You may need to install the printer driver software before you use the printer.
Page 238: Floppy Disk Drives
Floppy Disk Drives Why doesn't the Unplug or Eject Hardware icon The computer does not recognize the floppy disk drive. First, make sure the USB cable is properly connected to the USB port. If you need to secure the connection, wait a few moments for the computer to recognize the drive. If the icon still does not appear, follow these steps: Close any programs that were accessing the floppy disk drive.
Page 239 Floppy Disk Drives Why doesn't the Unplug or Eject Hardware icon The computer does not recognize the floppy disk drive. First, make sure the USB cable is properly connected to the USB port. If you need to secure the connection, wait a few moments for the computer to recognize the drive. If the icon still does not appear, follow these steps: Close any programs that were accessing the floppy disk drive.
Page 240 Why is the drive unable to write data to a floppy disk? Make sure the floppy disk is properly inserted in the drive. See Using a Floppy Disk Drive for instructions on how to insert the disk properly. If the disk is inserted properly and you are still unable to write data to it, the disk may be full or write-protected. You can either use a floppy disk that is not write-protected, or disable the disk's write-protect feature by moving the write-protect tab into the "close"...

Sony VAIO PCG-GRT100K User Manual

Quick Links

Related Manuals for Sony VAIO PCG-GRT100K

Summary of Contents for Sony VAIO PCG-GRT100K

Table of Contents