Table of Contents
Advertisement
Commercial Mode Overview
This document describes how to set up EU960H Pro:Centric
commercial TV functionality is based on "ownership" of the Channel Map; that is, the Channel Map resides
in the TV's CPU or Protocol Translation Controller (PTC), or it resides in a Pro:Centric application or an
external device from the solution provider.
These TV models support several different operational modes: LG's Free-To-Guest (FTG) Mode via the TV
CPU, Application Tuning Mode (ATM) with Pro:Centric application, or Pass-through Mode (default). When
in Pass-through Mode, these TV models can also be externally controlled via Multiple Protocol Interface
(MPI) or TV-Link Tuner (TLT) interface (RS-232C).
Setup Checklist
Note: This document provides information specific to Commercial Mode operation. Refer to the Owner's
Manual and/or Easy Setup Guide for information on TV installation and hardware and cable connections.
Installation
__ Unpack TV and all accessories.
__ Install batteries in the Installer Remote.
__ Install TV on VESA mount or stand.
Note: It may be advisable to make all cable
connections before installing on VESA mount
or stand, as appropriate.
Hardware Connections
__ Install any additional hardware as
appropriate to your institution, LAN, etc.
Pass-through Mode
This mode allows you to configure individual TVs for Pro:Centric and/or FTG Mode operation. This mode
also allows external control via either the MPI port or the TLT (RS-232C) port on the TV rear jack panel.
There are several methods for configuring individual TVs that are currently in Pass-through Mode: using
one of the First Use Wizard options or using the Custom Master TV Setup procedure.
First Use Wizard
When the TV is in a factory default state, the First Use Wizard provides three configuration options,
including configuration of basic settings (language & location, network settings, etc.), configuration
via EZ-Manager Wizard (automated or manual options for configuring essential items for Pro:Centric
operation), and configuration via the IP Environment Menu (network settings, manual Pro:Centric settings,
etc.). Use the Installer Remote to make selections and complete each step. See "First Use Wizard" on
pages 16 to 17 for further information.
Custom Master TV Setup
The Custom Master TV Setup procedure enables you to create a customized Master TV Setup for
Pass-through Mode or FTG Mode configuration purposes. Use the Installer Remote to configure Installer
Menu items as required for TV operation and set up TV features (Channel, Picture, Sound, etc.). See
"Custom Master TV Setup" on pages 49 to 51 for detailed information.
6
®
TVs for Commercial Mode operation. LG
Cable Connections
__ Make all rear jack panel connections, as
appropriate.
Commercial Mode Setup
__ Complete appropriate procedures as described
in this document for Commercial Mode operation.
206-4334
Advertisement
Table of Contents
