Hw Self Test Failure; Oscillator Test Failure - Nokia 2366i Rf Description And Troubleshooting
Mobile terminals
Hide thumbs
Also See for 2366i:
- Manual del usuario (121 pages) ,
- User manual (113 pages) ,
- Baseband description and troubleshooting (36 pages)
Table of Contents
Advertisement
2366i (RM-155)
RF Description and Troubleshooting
4. Open the Troubleshooting menu, and click GPS Quick Test. The GPS Control
dialog box appears
5. In the Test State field, ensure that Galvanic is selected.
6. Click select Start test.
See
Figure 47
HW Self Test Failure
If the test fails, repeat steps 1—6. If the test fails again, continue with the following self-
test failure troubleshooting:
1. Verify the DC voltages at VRF_GPS and VDD_IO_GPS.
2. Inspect all GPS circuit elements around the GPS BB chip (D6200).
3. If the elements pass a visual inspection, replace the N6200.
Oscillator Test Failure
1. Inspect all GPS circuit elements around the N2651.
2. If the elements pass a visual inspection, replace the G6250.
Page 46
Figure 46: GPS Control dialog box
for the GPS test points.
Company Confidential
Issue 2 - February 2007
Advertisement
Table of Contents
Troubleshooting
