Table of Contents
Advertisement
Step
Task
Line Filter
29
Line Density
30
Enhance
31
Reject
32
For further details refer to the Voluson E-Series Basic User Manual.
Note
4.3.2 Additional (optional) Operating Modes
4.3.2.1 B-Flow
B-Flow On/Off switch
Press the BF key to activate/deactivate the B-Flow mode.
Note
For further details refer to the Voluson E-Series Basic User Manual.
Voluson E-Series Service Manual
KTD106657 Revision 2
The signals of the neighboring pulses are less weighted for the display of the actual
pulse which considerably improves the detail lateral resolution and signal-to-noise ratio.
This function is only available if
Control to improve the resolution by reducing the frame rate. Respectively reducing the
resolution by increasing the image frame rate.
Edge Enhance brings out subtle tissue differences and boundaries by enhancing the
gray scale differences corresponding to the edges of structures.
Selects a level below which echoes will not be amplified (an echo must have a certain
minimum amplitude before it will be processed).
Figure 4-9 B-Flow Main and B-Flow Sub Menu
Expected Results
XBeam CRI is switched off.
Functional Checks
4-11
Advertisement
Chapters
Table of Contents
Troubleshooting
