Page 1 ® Satellite Series User’s Guide If you need assistance: ❖ Toshiba Global Support Centre Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see page 168 in this guide. Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
Page 2 If you fail to do so, this product may not function properly and you may lose data or suffer other damage. TOSHIBA AMERICA INFORMATION SYSTEMS (“TOSHIBA”), ITS AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE.
Page 3: Fcc Notice
Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used...
Page 4: Type Of Service
Contact: Toshiba America Information Systems, Inc. 9740 Irvine Blvd. Irvine, CA 92618-1697 (949) 583-3000 Industry Canada Requirement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conformé à la norme NMB-003 du Canada.
Page 5: If Problems Arise
FCC. In the event repairs are ever needed on your modem, they should be performed by Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba.
Page 6: Wireless Interoperability
USOC RJ11C. Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: ❖...
Page 7: Wireless Lan And Your Health
If you should experience any such problem, immediately turn off either one of your Bluetooth™ or Wireless LAN. Please contact Toshiba PC product support on Web site http:// www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or http://www.pcsupport.global.toshiba.com in the United States for more information.
Page 8: Regulatory Information
Regulatory Information The TOSHIBA Wireless LAN Mini PCI Card must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. This device complies with the following radio frequency and safety standards.
Page 9 België/ For outdoor usage only channel 10 (2457 MHz) and 11 (2462 MHz) is Belgique: allowed. For private usage outside buildings across public grounds over less than 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m.
Page 10 Caution: Exposure to Radio Frequency Radiation The Toshiba Wireless LAN Mini PCI Card will be installed with one of two types of antennas. The both of antenna types, when installed are located at the upper edge of the LCD screen.
Page 11 Refer to the Regulatory Statements as identified in the documentation that comes with those products for additional information. Caution: Radio Frequency Interference Requirements This device is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range. FCC requires this product to be used indoors for frequency range 5.15 to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems.
Page 12: Device Authorization
This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is possible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-13-1100 Direct Dial: 03-3457-5916...
Page 13: Interference Statement
❖ Consult the dealer or an experienced radio/TV technician for help. Toshiba is not responsible for any radio or television interference caused by unauthorized modification of the devices included with this Toshiba Wireless LAN Mini PCI Card, or the substitution or attachment of connecting cables and equipment other than specified by Toshiba.
Page 14 Approved Countries/Regions for use for the Atheros AR5001X Mini PCI Wireless network adapter This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table. NOTE This device works on passive scan only.
Page 15 Approved Countries/Regions for use for the Intel Wireless LAN 2100 3B Mini PCI Adapter This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table.
Page 16: Bluetooth Wireless Technology Interoperability
New Zealand Portugal Sweden Bluetooth wireless technology Interoperability Bluetooth™ Cards from TOSHIBA are designed to be interoperable with any product with Bluetooth wireless technology that is based on Frequency Hopping Spread Spectrum (FHSS) radio technology, and is compliant to: ❖...
Page 17: Bluetooth Wireless Technology And Your Health
Always use Bluetooth™ cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA PC product support on Web site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or http://www.pcsupport.global.toshiba.com in the United States for...
Page 18: Regulatory Statements
In some situations or environments, the use of Bluetooth wireless technology may be restricted by the proprietor of the building or responsible representatives of the organization. These situations may for example include: ❖ Using the equipment with Bluetooth wireless technology on board of airplanes, or ❖...
Page 19 The radiated output power of the Bluetooth™ Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth™ Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized.
Page 20 The legal communications mentioned in the above item refer to radio communications operated in accordance with telecommunication laws and regulations. Low power radio frequency electric machinery shall resist against interference from legal communications or from industrial, scientific and medical radio emission electric machinery. Using this equipment in Japan In Japan, the frequency bandwidth of 2,400-2,483.5 MHz for second generation low-power data communication systems such as this equipment...
Page 21 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-13-1100 Direct Dial: 03-3457-5916 Fax: 03-5444-9450 Device Authorization This device obtains the Technical Regulation Conformity Certification, and it belongs to the device class of radio equipment of low-power data communication system radio station stipulated in the Radio Law of Japan.
Page 22 This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 23 WinDVD is a trademark of InterVideo, Inc. ConfigFree is a trademark of Toshiba Corporation. Dolby - Manufactured by Toshiba under license from Dolby Laboratories/ Dolby and the double-D symbol are trademarks of Dolby Laboratories. TouchPad is a trademark of Synaptics, Inc.
Page 24: Table Of Contents
Contents Introduction ...32 This guide ...32 Safety icons ...33 Other icons used...34 Other documentation ...34 Service options ...35 Chapter 1: Finding Your Way Around ...36 Making sure you have everything...36 Front with the display closed ...37 Back ...38 Right side...39 Left side ...40 Front with the display open...41 Front panel lights ...42...
Page 25 Keeping yourself comfortable ...47 Precautions...50 Setting up your computer ...52 Setting up your software...52 Registering your computer with Toshiba ...53 Adding external devices ...54 Connecting the AC adapter...55 Charging the main battery...57 Using the computer for the first time ...58 Opening the display panel ...58...
Page 26 Starting again after Turn Off ...98 Using Hibernation ...98 Starting again from Hibernation mode ...99 Using Stand by ...100 Going into Stand by mode more quickly ...101 Starting again from Stand by ...102 Toshiba’s online resources ...102 ® special keys...78...
Page 27 Chapter 4: Mobile Computing ...103 Toshiba’s energy-saver design...103 Running the computer on battery power ...103 Power management ...105 Charging the battery ...105 Charging the RTC battery...106 Monitoring battery power ...107 Determining remaining battery power...107 Conserving battery power ...108 What to do when the battery runs low ...109 Setting battery alarms...110...
Page 28 Contents Resizing and moving windows...130 Lesson 8: Closing programs ...132 Lesson 9: Creating shortcuts ...132 Creating a shortcut to the Calculator...132 Creating a shortcut to the Character Map ...133 Lesson 10: Changing the screen saver...135 Lesson 11: Setting the date and time...137 Lesson 12: Removing objects from the desktop ...138 Lesson 13: Using System Restore ...140 Lesson 14: If I am lost, what do I do? ...141...
Page 29 The World Wide Web ...157 Internet Service Providers...158 Signing up with an Internet Service Provider .158 Surfing the Internet...158 Internet features...159 Uploading and downloading files on Exploring video features ...160 Changing the display properties setting ...160 Display settings hot key ...161 Exploring audio features ...161 Recording sounds...161 Using a microphone...162...
Page 30 Modem problems...191 Develop good computing habits ...191 If you need further assistance...193 Before you call ...193 Contacting Toshiba ...194 Other Toshiba Internet Web sites ...195 Toshiba’s worldwide offices...195 Appendix A: Hot Keys ... 199 Instant password security...199 Without a password ...199 With a password ...199...
Page 31 Appendix C: Using ConfigFree™ with your Toshiba Computer...207 Getting Started...208 ConfigFree Main Screen ...208 Starting ConfigFree ...209 Configuring ConfigFree ...209 ConfigFree Utilities...210 Connectivity Doctor ...210 Device Settings ...211 Profile Settings ...213 Quick Connect...214 Using Auto Switch ...215 Auto Switch (Cable Disconnect)...216 Auto Switch (SSID)...216...
Page 32: Introduction
Windows XP Pro operating system. Your operating system offers exciting features and easy Internet access. This guide contains information about your operating system and how it functions with your Toshiba computer. For specific information on the software, see the Microsoft booklet that shipped with your computer.
Page 33: Safety Icons
familiarize yourself with the components of the computer and how to turn it on. After that, seek out whatever interests you most. Safety icons This manual contains safety instructions that must be observed in order to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data.
Page 34: Other Icons Used
Guides for other programs that may come preinstalled on your computer or that are available for installation on your Recovery media. ❖ For accessory information, visit Toshiba's Web site at toshiba.com. ❖ The Microsoft documentation which explains the features of the operating system.
Page 35: Service Options
Introduction Service options Service options Toshiba offers a full line of service options built around its SelectServ limited warranty programs. To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com.
Page 36: Chapter 1: Finding Your Way Around
Chapter 1 Finding Your Way Around This chapter presents a “grand tour” of your notebook computer. It serves as a reference when you need to locate specific parts of the computer. Making sure you have everything Before doing anything else, consult the Quick Start card provided with your system to make sure you received everything.
Page 37: Front With The Display Closed
Finding Your Way Around Front with the display closed Front with the display closed Front panel lights Display latch Volume control CD/DVD control buttons DVD ROM drive shown The display latch keeps the display panel closed and locked. To open the display panel, slide the display latch to the right and raise the panel.
Page 38: Back
Finding Your Way Around Back Back LAN port Modem port The DC IN port is where you plug in the AC adapter for either operating the computer on external power or charging the battery. The RGB (monitor) port lets you connect an external monitor.
Page 39: Right Side
The cooling vent prevents the computer’s central processing unit (CPU) from overheating so that it can continue to perform at maximum speed. To prevent possible CPU overheating, do not block the cooling vents when the computer is in use. Right side The PC Card slot supports a Type II PC Card.
Page 40: Left Side
Finding Your Way Around Left side Left side Wireless antenna on/off switch* The 3.5 mm headphone jack lets you connect stereo headphones or other audio-output devices, such as external speakers. Connecting other devices automatically disables the internal speakers. The 3.5 mm microphone jack lets you connect an external monaural microphone or other audio input device.
Page 41: Front With The Display Open
The power button turns the computer on and off. Holding down the power button for four seconds resets the computer. The Internet button launches your default Internet browser. The TOSHIBA Console button allows quick access to various functions. The TV Out button activates an external display device, such as a TV, when connected to the S-video port.
Page 42: Front Panel Lights
Finding Your Way Around Front with the display open The function keys, when used with the several different system functions. For more information, see “Hot Keys” on page The front panel lights and system indicator lights provide information about various system functions. The TouchPad stroke of a finger.
Page 43: System Indicator Lights
Finding Your Way Around Front with the display open The battery light indicates the main battery’s current charge. It glows green when the battery is fully charged. It glows amber while the battery is being charged. It does not glow if the external power source is disconnected or if the battery is completely discharged.
Page 44: Underside
Finding Your Way Around Underside The cursor control mode light glows when the cursor control overlay is on. When this light is on, pressing an overlay key moves the cursor in the direction of the white arrow printed on the key instead of typing the letter printed on the top of the key.
Page 45 Finding Your Way Around Underside “Installing additional memory (optional)” on page 62 detailed information. The battery pack contains the battery. For information about replacing the battery, see “Changing the main battery” on page 111. The release secures the battery to the computer, preventing it from dislodging from the computer case.
Page 46: Chapter 2: Getting Started
Chapter 2 Getting Started This chapter provides tips for working comfortably, describes how to connect components, and explains what to do the first time you use your notebook computer. Selecting a place to work Your computer is portable and designed to be used in a variety of circumstances and locations.
Page 47: Keeping Yourself Comfortable
AC power source, and let it dry out completely before turning it on again. If the computer does not operate correctly after you turn it back on, contact a Toshiba Authorized Service Provider. Keeping yourself comfortable Strain and stress injuries are becoming more common as people spend more time using their computers.
Page 48 Getting Started Selecting a place to work ❖ If you are using an external monitor, the top of the display should be no higher than eye level. ❖ If you use a paper holder, set it at about the same height and distance as the screen.
Page 49 ❖ Adjust the back of your chair so that it supports the lower curve of your spine. If necessary, use a cushion to provide extra back support. Lower-back-support cushions are available at many office supply stores. ❖ Sit with your back straight so that your knees, hips, and elbows form approximately 90-degree angles when you work.
Page 50: Precautions
Getting Started Selecting a place to work Work habits The key to avoiding discomfort or injury from strain is to vary your activities. If possible, schedule a variety of tasks into your working day. Finding ways to break up the routine can reduce stress and improve your efficiency.
Page 51 ❖ Some PC Cards can become hot with prolonged use. If two cards are installed, both can become hot even if only one is being used. Overheating of a PC Card can result in errors or instability in its operation. Be careful when you remove a PC Card that has been used for a long period.
Page 52: Setting Up Your Computer
Getting Started Setting up your computer Setting up your computer TECHNICAL NOTE: You must complete all set up steps up to “Setting up your software” on page 52 or internal components to your computer. These components include, but are not limited to, a mouse, keyboard, printer, memory, and PC cards.
Page 53: Registering Your Computer With Toshiba
A window will display asking if you wish to register with Toshiba and Microsoft. Click Yes to register, or No to exit the process. If you click No, you may register with Toshiba by clicking the NOTE Register with Toshiba icon on the desktop.
Page 54: Adding External Devices
To register online, your computer’s modem must be connected NOTE to a voice-grade telephone line. Adding external devices Before adding external devices, Toshiba recommends setting NOTE up your software first. See page Before starting to use your computer, you may also want to: ❖...
Page 55: Connecting The Ac Adapter
Connecting the AC adapter Your computer requires power to operate. Use the power cable and AC adapter to connect the computer to a live electrical outlet, or to charge the computer’s battery. Power cable Sample power cable and AC adapter Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
Page 56 Connecting the AC adapter Use only the AC adapter supplied with your computer or an equivalent adapter that is compatible. Use of any incompatible adapter could damage your computer. Toshiba assumes no liability for any damage caused by use of an incompatible adapter.
Page 57: Charging The Main Battery
Connecting the AC adapter to the computer Connect the power cable to a live electrical outlet. The AC power and battery lights glow. Damaged power cables can cause fire or electric shock. Never modify, forcibly bend, place heavy objects on top of, or apply heat to the power cable.
Page 58: Using The Computer For The First Time
Getting Started Using the computer for the first time Once the battery is charged for the first time, avoid leaving the computer plugged in and turned off for more than a few hours at a time. Continuing to charge a fully charged battery can damage the battery.
Page 59: Turning On The Power
manufactured using high-precision technology. Any small bright dots that may appear on your display are an intrinsic characteristic of the TFT manufacturing technology. Turning on the power Check that any drives on the computer are empty. Turn on the computer by pressing and releasing the power button located on the top of the keyboard.
Page 60: Using The Touchpad
Getting Started Using the computer for the first time Using the TouchPad The TouchPad, the small, smooth square cutout located in front of the keyboard, is sensitive to touch and enables you to move the cursor with the stroke of a finger. Simply move your finger on the TouchPad in the direction you’d like to move the cursor: ❖...
Page 61: Control Buttons
Control buttons When a step instructs you to click or choose an item, move the cursor to the item, then press and release the primary (left-hand) button. To double-click, press the primary button twice in rapid succession. The primary button usually corresponds to the left mouse button.
Page 62: Installing Additional Memory (Optional)
Toshiba Web site at pcsupport.toshiba.com). There are two memory slots. Your system may have both slots occupied.
Page 63 Installing additional memory (optional) You need a standard Phillips no. 1 screwdriver to install a memory module. To avoid damaging the computer’s screws, use a standard Phillips no. 1 screwdriver that is in good condition. If you are adding memory after you have started to use the computer, begin at step 1, otherwise skip to step 2.
Page 64 Getting Started Installing additional memory (optional) Removing the memory slot cover Put the screws and the cover in a safe place so that you can retrieve them later. Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up.
Page 65 Installing additional memory (optional) Inserting the memory module Avoid touching the connectors on the memory module or on the computer. Grease or dust on the connectors may cause memory access problems. Replace the expansion memory slot cover. Replace the screws and tighten them. Turn the computer over and reconnect any cables you removed.
Page 66: Removing A Memory Module
Getting Started Installing additional memory (optional) Removing a memory module Follow steps 1 through 6 in memory (optional)” on page Gently push the memory locks outward until the memory module pops up. Removing the memory module Gently pull the memory module diagonally to pull it out of the slot.
Page 67: Connecting A Printer
Connecting a printer Your printer documentation may require you to install the printer software before physically connecting the printer to your computer. If you do not install the software as instructed by the printer manufacturer, the printer may not function correctly.
Page 68: Setting Up A Printer
Getting Started Setting up a printer Plug the USB connector into one of the USB ports on your computer Plug the printer’s power cable into a live AC outlet. To connect a parallel printer: Connecting the parallel printer cable while the computer is on may damage the printer, the computer, or both.
Page 69 Select Printers and Faxes. The Printers and Faxes window appears. Sample Printers and Faxes window Click Add Printer. The Add Printer Wizard starts. Sample Add Printer Wizard Getting Started Setting up a printer...
Page 70 Getting Started Setting up a printer Click Next. The Add Printer Wizard asks you to select your printer. TECHNICAL NOTE: If your printer is Plug and Play, the operating system recognizes it automatically. You can ignore the remainder of this section. See your printer manual. If the printer you are setting up: ❖...
Page 71: Turning Off The Computer
Click Next. The operating system prompts you to print a test page. If your printer is connected and turned on, click Next. To complete the setup procedure without printing a test page, click No, then click Next. Click Finish. You are now ready to print. Depending on your program, you may see various messages indicating the status of your print job.
Page 72: Caring For Your Computer
Cleaning the computer To keep your computer clean, gently wipe the display panel and exterior case with a lightly dampened cloth. Ask your Toshiba dealer for suggestions for appropriate cleaning products. Keep liquid, including cleaning fluid, out of the computer’s keyboard, speaker grille, and other openings.
Page 73: Moving The Computer
You can purchase a carrying case from your Toshiba dealer (To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com).
Page 74 Getting Started Caring for your computer Insert the cable’s locking end into the security lock slot, then rotate the key a quarter turn and remove it. The computer is now securely locked to deter computer theft. Locking the computer...
Page 75: Chapter 3: Learning The Basics
Chapter 3 Learning the Basics This chapter lists some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently. Your work temporarily stays in the computer’s memory until you save it to the disk. You will lose all unsaved work, if, for example, a system error occurs and you must restart your computer, or your battery runs out of charge while you are working.
Page 76: Using The Keyboard
Learning the Basics Using the keyboard ❖ Back up your files to storage media on a regular basis. Label the backup copies clearly and store them in a safe place. If your hard disk suddenly fails, you may lose all the data on it unless you have a separate backup copy.
Page 77: Character Keys
Character keys Typing with the character keys is very much like typing on a typewriter, except that: ❖ The spacebar creates a space character instead of just passing over an area of the page. ❖ The lowercase l (el) and the number 1 are not interchangeable.
Page 78: Windows Special Keys
Learning the Basics Using the keyboard Windows special keys ® ® Windows special keys The keyboard provides two keys that have special functions in the operating system: ❖ The Windows ❖ The Application key has the same function as the secondary TouchPad control button (or secondary mouse button).
Page 79 Using the numeric keypad overlay To turn on the numeric keypad overlay, press simultaneously. The numeric mode light on the keyboard indicator panel glows when the numeric overlay is on. You can still use the overlay keys to type alphabetic characters while the numeric overlay is on.
Page 80: Starting A Program
Learning the Basics Starting a program To turn off the cursor control overlay, hold down the and press keyboard indicator panel goes out. Starting a program The easiest way to start a program is to double-click the name of the file that contains the information you want to work on. To find the file, use My Computer or Windows Explorer.
Page 81: Printing Your Work
To save: ❖ A file you are updating, open the program’s File menu and click Save. ❖ A new file, choose Save As from the File menu, type a name for the file, and click OK. HINT: To make another copy of the file you are currently working with, choose Save As from the File menu and give the new file a different name.
Page 82: Backing Up Your Files
Learning the Basics Backing up your files Backing up your files Backing up your files means copying individual files to media, such as CD, or copying entire sections of your hard disk to another device, such as a tape drive. For those systems with a floppy disk drive, you may back up file to a floppy disk as follows: To back up to a CD or other media, insert the media into...
Page 83: Drive Components And Control Buttons
Using the DVD-ROM or multi-function drive For optimum DVD performance, it is recommended that you NOTE play DVDs while running the computer on AC power. TECHNICAL NOTE: Your DVD-ROM or multi-function drive is set to play region 1 (North America) DVD-ROMs. If you play a DVD disc from another region, the drive will automatically change to play in the format of the other region.
Page 84: Cd/Dvd Control Buttons
Learning the Basics Using the DVD-ROM or multi-function drive Never press the eject button or turn off the computer while the drive-in-use indicator light is glowing. Doing so could damage the disc or the drive. The eject button requires power to operate. The manual eject button does not require power.
Page 85: Cd/Dvd Control And Digital Audio Modes
Using the DVD-ROM or multi-function drive the mode button is locked, you cannot switch between the CD/DVD and digital audio modes. To unlock the mode button, press and hold it for four seconds. The previous track button returns to the preceding track on the disc.
Page 86: Inserting A Disc
Learning the Basics Using the DVD-ROM or multi-function drive Power is off and you press Play/Pause Operating system is running and you press Play/Pause Inserting a disc Before playing an audio CD, turn the volume down. Playing the compact disc at maximum volume could damage your ears.
Page 87 Using the DVD-ROM or multi-function drive The disc tray partially opens. To avoid damaging a disc or losing data, check that the disc activity light is off before opening the disc tray. Grasp the disc tray and pull it fully open. Hold the disc by its edges and check that it is clean and free of dust.
Page 88: Playing An Audio Cd
Learning the Basics Using the DVD-ROM or multi-function drive Gently press the center of the disc onto the spindle until it locks into place. Spindle Disc Positioning the disc on the spindle Make sure the disc is properly positioned on the spindle. If you position the disc incorrectly, it can jam the disc tray.
Page 89 Using the DVD-ROM or multi-function drive The Windows Media Player window appears. Rewind Play Stop Previous track Next track Mute Sample Windows Media The Windows Media an ordinary compact disc player: ❖ To play the CD or to pause, click the Play/Pause button on the CD Player control panel.
Page 90: Viewing The Contents Of A Cd Or Dvd
Learning the Basics Using the DVD-ROM or multi-function drive Viewing the contents of a CD or DVD CDs and DVDs contain files just like the hard disk. CDs are often used to install software or store files that require lots of space, such as photographs and large presentation files.
Page 91: Removing A Disc With The Computer Off
Using the DVD-ROM or multi-function drive Removing a disc with the computer off Insert a slender object, such as a straightened paper clip, into the manual eject button access hole. Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and damage it.
Page 92: Setting Up For Communications
To stay current on the most recent software and hardware NOTE options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com. Connecting the modem to a phone line Your computer comes with a built-in modem. To use the modem, you must connect it to a standard voice-grade RJ-11 telephone line.
Page 93: Powering Down The Computer
To use a dial-up connection, have your network administrator configure your computer for the network and supply you with the telephone number for the dial-up connection. To set up the network connection, use the Dial-Up Networking Wizard: Click Start and point to All Programs. Point to Accessories, then to Communications.
Page 94: Using Turn Off Or Shut Down
Learning the Basics Using Turn Off or Shut down TECHNICAL NOTES: Before using any of these options to power down your computer, save your files and make sure the disk activity lights are off. If you change your mind and decide to continue working after all, wait a few seconds before turning the computer on again.
Page 95: Hibernation Command
The computer shuts down completely. Holding the shift key while the Turn Off computer Windows NOTE dialog box is open, changes the Stand By button to hibernate. For more information about setting up hibernation “Hibernation command” on page 95 on page Hibernation command The Hibernation command shuts the computer down completely, but it first saves the current state of the computer...
Page 96: Stand By Command
Learning the Basics Using Turn Off or Shut down For more information about the Hibernation command, see “Using Hibernation” on page going into Hibernation mode more quickly, see Hibernation mode more quickly” on page Stand By command The Stand by puts the computer into a power-saving mode. Stand by holds the current state of the computer in memory so that, when you restart the computer, you can continue working from where you left off.
Page 97: Turning Off More Quickly
You can also turn off the computer by pressing the power button or closing the display panel. To use either of these methods, you first need to turn on the feature in the Toshiba Power Management Utility. Click Start, Control Panel, then Performance and Maintenance.
Page 98: Starting Again After Turn Off
Going into Hibernation mode more quickly You can also put the computer into Hibernation mode by pressing the power button or closing the display panel. Click Start, Control Panel, then Performance and Maintenance. Double-click the Toshiba Power Management icon.
Page 99: Starting Again From Hibernation Mode
When I close the lid Set this option to Hibernation for the computer to go into Hibernation mode when you close the display panel. Sample Toshiba Power Management Advanced tab Click Apply. Click OK, then close the Control Panel. Starting again from Hibernation mode To start the computer from Hibernation mode, press and release the power button.
Page 100: Using Stand By
Learning the Basics Using Stand by If you put the computer in Hibernation mode by closing the display panel, you can start it again by opening the display panel. If your computer is running on batteries, you cannot start it NOTE again by opening the display panel.
Page 101: Going Into Stand By Mode More Quickly
Toshiba’s Power Saver utility. Open the Start menu, then click Control Panel. Click the Performance and Maintenance icon, and then click the Toshiba Power Management icon. Click the Advanced tab. Select Stand By for the options you want. When I press the power button Set this option to Stand By to put the computer into Stand by mode when you press the power button.
Page 102: Starting Again From Stand By
Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions, and keep you up to date with future upgrades.
Page 103: Chapter 4: Mobile Computing
Many of these energy-saving features have been set by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you can use it for longer periods while traveling.
Page 104 Toshiba Web site at pcsupport.toshiba.com. To ensure that the battery maintains its maximum capacity, operate the computer on battery power at least once a month until the battery is fully discharged.
Page 105: Power Management
Users who are not completely familiar with the power management component of the system should use the preset configuration. For assistance with setup changes, contact Toshiba’s Global Support Centre. Charging the battery Battery charge time may vary depending on the applications, NOTE power management settings, and features used.
Page 106: Charging The Rtc Battery
Mobile Computing Charging the battery To ensure that the battery charges to its full capacity, wait until it reaches room temperature (50 to 80 degrees Fahrenheit, 10 to 26 degrees Celsius). ❖ The battery is almost completely discharged. Leave the power connected, and the battery should begin charging after a few minutes.
Page 107: Monitoring Battery Power
To recharge the RTC battery, plug in the computer and leave it turned off for at least 48 hours. When Hibernate mode is enabled and the RTC battery is NOTE completely discharged, a warning prompts you to reset the real-time clock. TECHNICAL NOTE: The RTC battery does not charge while the computer is turned off, even when AC power is attached.
Page 108: Conserving Battery Power
The value displays as a percentage of remaining battery charge. Click the Battery Power Meter tab. Sample Toshiba Power Management Battery Power Meter tab TECHNICAL NOTE: The computer drains the battery faster at low temperatures. Check your remaining charge frequently if you are working in temperatures below 50 degrees Fahrenheit.
Page 109: What To Do When The Battery Runs Low
Toshiba’s power-saving options greatly increase the length of time you can use the computer before it becomes necessary to recharge the battery. Toshiba has combined these options into preset power usage modes. What to do when the battery runs low When the battery runs low you can ❖...
Page 110: Setting Battery Alarms
To set an alarm: Click Start, Control Panel, then Performance and Maintenance. Double-click the Toshiba Power Management icon. Click the Alarm tab and set the alarm, as desired. Sample Toshiba Power Management Alarm tab...
Page 111: Changing The Main Battery
Changing the main battery When your battery power is running low, you have two options—connect the computer to an AC power source or install a charged battery. When handling a battery, be careful not to drop it or short- circuit its terminals. Removing the battery from the computer Save your work.
Page 112: Taking Care Of Your Battery
Mobile Computing Taking care of your battery While still holding the release latch in the open position gently slide the battery pack out of the computer. Removing the battery If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately following the advice in Taking care of your battery...
Page 113: Maximizing Battery Life
Use protective gloves when handling a damaged battery. ❖ To replace the main battery, use an identical battery that you can purchase through toshiba.com. ❖ Reverse Polarity should be avoided with all batteries. The main battery is designed so that it cannot be installed in reverse polarity.
Page 114 Mobile Computing Taking care of your battery Operate the computer on battery power for five minutes. If the battery pack has at least five minutes of operating time, continue operating until the battery pack is fully discharged. If the battery light LED flashes or there is some other warning to indicate a low battery, go to step 4.
Page 115: Disposing Of Used Batteries Safely
Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by Toshiba. After repeated use, the batteries will finally lose their ability to hold a charge and you will need to replace them. Under federal, state and local laws, it may be illegal to dispose of old batteries by placing them in the trash.
Page 116: Traveling Tips
❖ Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cables, and compact discs. Contact your authorized Toshiba representative for more information.
Page 117: Xp Operating System
Chapter 5 Getting to Know the Windows System This chapter introduces the Windows by guiding you through a few basic tasks. If you have used a Windows will find the Windows Whether you have used a Windows the skill and confidence you will gain from this chapter will more than offset the short amount of time spent going through these lessons.
Page 118: Lesson 1: Exploring The Desktop
Getting to Know the Windows ® XP Operating System Lesson 1: Exploring the desktop Lesson 1: Exploring the desktop The desktop is the launching pad for everything you can do in the Windows start programs, find documents, set up system components, and perform most other computing tasks.
Page 119 The icons initially displayed on your system desktop include: Toshiba Access—Opens a window with links to software updates, services and support, and other important benefits. Recycle Bin—Holds files you’ve deleted using the Windows Explorer.
Page 120: Windows ® Xp File System
Getting to Know the Windows ® XP Operating System Lesson 1: Exploring the desktop you open. You can use these buttons to quickly switch between the programs or windows. To make a program or window the active one, click the program’s or window’s button on the taskbar.
Page 121: Lesson 2: Using The Touchpad And Control Buttons Together
Getting to Know the Windows ® XP Operating System Lesson 2: Using the TouchPad and control buttons together For more information, read the Microsoft documentation that comes with your computer. Lesson 2: Using the TouchPad and control buttons together The “Getting Started” chapter introduced you to the TouchPad, which is your basic tool for moving around the screen.
Page 122 Getting to Know the Windows ® XP Operating System Lesson 2: Using the TouchPad and control buttons together Click an empty area to close the shortcut menu. Use the TouchPad to move the pointer to the Start button. Click Start, and select My Computer. The My Computer window appears.
Page 123: Lesson 3: Learning About The Internet
Getting to Know the Windows ® XP Operating System Sample desktop with the taskbar on the right HINT: You can move the taskbar to any of the desktop’s four edges. Click the taskbar once again and drag it back to the bottom of the desktop.
Page 124: Lesson 4: Creating A New Document
Getting to Know the Windows ® XP Operating System Lesson 4: Creating a new document you can also type a Web address in the My Computer window. Click Start, then double-click My Computer. The My Computer window appears. On the View menu, point to Toolbars, then click Address Bar if it is not checked.
Page 125 Getting to Know the Windows ® XP Operating System Lesson 4: Creating a new document The operating system creates an icon on the desktop called New Text Document with the icon name highlighted. To give your document a meaningful name, type and press Doc.txt Double-click the My New Doc icon.
Page 126: Lesson 5: Creating A New Folder
Getting to Know the Windows ® XP Operating System Lesson 5: Creating a new folder Lesson 5: Creating a new folder DEFINITION: A folder is an area where you can store documents and other types of files. It is analogous to a file folder stored in a file cabinet.
Page 127: Lesson 6: Starting Programs
Getting to Know the Windows ® XP Operating System Close the window by clicking its Close button and continue with the next lesson to learn how to start programs. Lesson 6: Starting programs Usually, you will know which program you want to use for a particular task.
Page 128 Getting to Know the Windows ® XP Operating System Lesson 6: Starting programs To open the second program, click Start, then click All Programs. Point to Accessories, then click Windows Explorer. The operating system opens Windows Explorer, which provides access to all your computer’s resources. For example, it lets you see all the files in a particular folder on the computer’s hard disk.
Page 129: Lesson 7: Resizing, Repositioning, And Hiding Windows
Getting to Know the Windows ® XP Operating System Lesson 7: Resizing, repositioning, and hiding windows Lesson 7: Resizing, repositioning, and hiding windows If you have followed the lessons in this chapter, you now have a screen with several program windows open. You can organize these windows by resizing and repositioning windows so that you can see more than one of them at a time.
Page 130: Resizing And Moving Windows
Getting to Know the Windows ® XP Operating System Lesson 7: Resizing, repositioning, and hiding windows Click the Minimize button at the top-right of the Explorer window to hide the window. Windows Explorer disappears from the desktop. However, it is still open, as you can see from the taskbar. HINT: Minimizing program windows is a good way to clean up the desktop without actually closing programs.
Page 131 Getting to Know the Windows ® XP Operating System Lesson 7: Resizing, repositioning, and hiding windows Click and drag the edge of the window until it takes up just less than half the width of the desktop. Click the title bar of the Paint window and drag it to the left side of the desktop.
Page 132: Lesson 8: Closing Programs
Getting to Know the Windows ® XP Operating System Lesson 8: Closing programs Lesson 8: Closing programs Once you are finished working with a document or program, it is a good idea to close it. While you can run several programs at the same time, having a large number of programs and documents open simultaneously can slow down your computer.
Page 133: Creating A Shortcut To The Character Map
Getting to Know the Windows ® XP Operating System Move the pointer to an empty area of the desktop, then click the secondary button. The operating system displays the desktop shortcut menu. Click New, then click Shortcut. The operating system displays the Create Shortcut dialog box.
Page 134 Getting to Know the Windows ® XP Operating System Lesson 9: Creating shortcuts Sample Search options on the Start menu Click All Files and Folders. The operating system displays the Search Results dialog box. Sample Search Results dialog box...
Page 135: Lesson 10: Changing The Screen Saver
Getting to Know the Windows ® XP Operating System HINT: Search also allows you to perform searches on the Internet. Type char and then click Search. The operating system displays a list of all the files with “char” in their names. Click the Character Map file with the secondary button and drag it to the desktop.
Page 136 Getting to Know the Windows ® XP Operating System Lesson 10: Changing the screen saver of these properties can be customized to meet your particular needs and tastes. DEFINITION: An object is an independent block of data, text, or graphics that was created by an individual application. This lesson introduces object properties by showing you how to change one of the properties of the desktop—the screen saver.
Page 137: Lesson 11: Setting The Date And Time
Getting to Know the Windows ® XP Operating System Click the arrow beside the current option to open the screen saver list box. Scroll through the screen saver options by clicking the scroll arrows in the list box. Try a screen saver pattern by clicking a name in the list box.
Page 138: Lesson 12: Removing Objects From The Desktop
Getting to Know the Windows ® XP Operating System Lesson 12: Removing objects from the desktop Sample Date and Time Properties dialog box HINT: To open the Date and Time Properties dialog box more quickly, either click the time display on the taskbar with the secondary button, then click Adjust Date and Time, or double- click the time display.
Page 139 Getting to Know the Windows ® XP Operating System Lesson 12: Removing objects from the desktop original uncluttered state. This lesson explains how to remove objects from the desktop and introduces the Recycle Bin. Click the New Folder icon you created, drag it until it is over the Recycle Bin icon and it changes color, then release the primary button.
Page 140: Lesson 13: Using System Restore
Getting to Know the Windows ® XP Operating System Lesson 13: Using System Restore Later on—in your real work, not in this tutorial—you will use the Recycle Bin to delete other objects such as folders, documents, and sometimes even programs. Still, the process is the same.
Page 141: Lesson 14: If I Am Lost, What Do I Do
Getting to Know the Windows ® XP Operating System Sample System Restore Welcome screen The operating system guides you through the process of storing your system settings for future use. It also guides you through restoring your system to the selected date or time. Lesson 14: If I am lost, what do I do? This lesson teaches you how to use some of the Help and Support features in Windows...
Page 142 Getting to Know the Windows ® XP Operating System Lesson 14: If I am lost, what do I do? Sample Help and Support Center Index The left side of the screen contains the index. The text box above the index, where the cursor is flashing, lets you type in a topic you want to find in the index.
Page 143: Using The Online Tours And Tutorials
Getting to Know the Windows ® XP Operating System Sample Drawing help window Click the Paint link. The operating system opens the Paint program. Not every Help topic contains a hot link to start the program it is talking about. However, when you do encounter one, it provides a convenient way to start the program to look at it while you read about the program in the Help topic.
Page 144: Lesson 15: Turning Off Your Computer
Getting to Know the Windows ® XP Operating System Lesson 15: Turning off your computer Sample Windows To start a Windows Click Start, then Help and Support. Click What’s new in Windows XP. Click Taking a tour or tutorial. On the right pane, click Take the Windows XP tour. Lesson 15: Turning off your computer It is very important that you let the Windows system shut down your computer.
Page 145: Chapter 6: Exploring Your Options
Chapter 6 Exploring Your Options In this chapter, you will explore other features of your notebook computer. ® Windows XP special features The Windows features and enhancements, including: ❖ New system file protection ❖ A system restore function, allowing you to rollback the system to its previous mode ❖...
Page 146: Personalizing Your Desktop
Exploring Your Options Personalizing your desktop Personalizing your desktop Your desktop is your virtual workspace. This section explains how to customize its features for the way you like to work. You can customize the following aspects of the desktop: ❖ Taskbar—which resources to display for quick access ❖...
Page 147: Bringing The World To Your Desktop
Bringing the world to your desktop With the Windows your desktop with complete World Wide Web integration at a single click. Turning on the Web content interface The first step to bring active content to your desktop is to turn on the Web content interface: Point to an empty space on the desktop and click the secondary button.
Page 148: Changing Desktop And Browsing Style
Exploring Your Options Personalizing your desktop To browse the Gallery for more components to add, click Visit Gallery. In order to browse, an active Internet connection must be established. To select some other Web site, type the address of the Web site you want or click Browse to locate it.
Page 149: Personalizing Individual Windows
Choosing a style To select desktop and browsing style options: Click Start, then click My Computer. The My Computer window appears. Select the Tools menu, then click Folder Options. The Folder Options dialog box appears. Sample Folder Options dialog box Click the preferred options.
Page 150: Customizing Window Toolbars
Exploring Your Options Personalizing your desktop a regular basis. For example, using this Web integration feature you can monitor weather, game scores, stock prices, or headlines—all in the window of your choice. Customizing window toolbars You can display one or more customizable toolbars at the top of a window.
Page 151: Displaying Information About Each Folder
The elements you can add to the top of the window are: Toolbar element Address Bar Standard buttons Displays buttons for commonly used Displaying a toolbar in a window Click Start, then click My Computer. The My Computer window appears. On the View menu, point to Toolbars, then click the name of the toolbar you want to display.
Page 152: Using Your Computer At The Office
Exploring Your Options Using your computer at the office Open the folder you want to view as a Web page. In the Tools menu, select Folder Options. In the Tasks section, click the button for Show common tasks in folders. Click Apply, then OK.
Page 153: Setting Up For Communications
Setting up for communications To connect to the Internet, use an online service, or communicate across the telephone lines with another computer, you need: ❖ A modem (one comes with your computer) ❖ A telephone line ❖ A browser or communications program ❖...
Page 154: Connecting The Modem To A Telephone Line
Exploring Your Options Using your computer at the office To verify that the modem is set up properly, double-click the COM port to which your modem is connected. The Modem AMR Properties box appears. In the device status area, the computer should indicate whether the modem is working properly.
Page 155: Exchanging Data With Another Computer
Exchanging data with another computer To transfer a large amount of information between computers, you need a physical connection and a synchronization program. You can use the Windows synchronization program that transfers data using a cable connected to the computers’ parallel ports. Transferring files using a parallel port connection To transfer files using the computers’...
Page 156: Connecting To The Internet
Exploring Your Options Connecting to the Internet Connecting to the Internet To connect to the Internet you may need: ❖ A modem (one comes with your computer) ❖ A telephone line, DSL, a cable connection, or a satellite link ❖ A browser or communications program ❖...
Page 157: An Overview Of Using The Internet
An overview of using the Internet The following sections give a quick introduction to the Internet and some of its exciting features, under these headings: ❖ The Internet ❖ The World Wide Web ❖ Signing up with an Internet Service Provider ❖...
Page 158: Internet Service Providers
Exploring Your Options An overview of using the Internet Internet Service Providers To connect a computer directly to the Internet, many people and businesses use an Internet Service Provider (ISP). An ISP is a company that has the equipment and the telecommunication lines necessary to maintain an Internet connection.
Page 159: Internet Features
Internet features The Internet offers many types of communication tools to help you perform many tasks. ❖ Internet email To send and receive email of your own, you need a mailbox on the Web, or an email address. If you have an account with an ISP, you can probably set up an email address at the same time as you sign up for the service.
Page 160: Exploring Video Features
Exploring Your Options Exploring video features large amounts of data. You can also use the File Transfer Protocol (FTP) supported by a separate software program. Exploring video features Your computer’s video features provide the viewing of presentations or DVD movies on the computer screen. TECHNICAL NOTE: Video CD playback capability is not enabled on all systems.
Page 161: Display Settings Hot Key
Click the Settings tab. Slide the Screen area slider bar toward Less until the setting reads 800 x 600, then click Apply. The screen blinks momentarily while the settings are adjusted. The Monitor Settings window appears and asks if you want to keep the settings.
Page 162: Using A Microphone
Exploring Your Options Exploring audio features TECHNICAL NOTE: If you record MP3 files, you will only be able to play them on a device capable of playing MP3 files. Using a microphone Connect an external microphone to the computer. Click Start, point to All Programs, Accessories, Entertainment, then click Sound Recorder.
Page 163: Adjusting Recording Settings
Adjusting recording settings The better the quality of the recording, the more disk space the sound file requires. Experiment to find a balance that fits your needs. Open Sound Recorder, if necessary (click Start, point to All Programs, Accessories, Entertainment, then click Sound Recorder).
Page 164: Connecting A Monitor, Keyboard And Mouse
Exploring Your Options Connecting a monitor, keyboard and mouse Connecting a monitor, keyboard and mouse By connecting an external monitor, external full-size keyboard and a mouse, you can work with your notebook as if it were a standard office desktop computer. You can connect an external monitor to the RGB (monitor) port.
Page 165: Inserting Pc Cards
Inserting PC Cards Use caution when lifting or turning your computer. Failure to NOTE do so may result in damage to components, such as cables, attached to your computer, or to the computer itself. Before you insert a PC Card, refer to the documentation that comes with the card to see if you need to do anything before you insert it.
Page 166: Removing Pc Cards
Exploring Your Options Using PC Cards Removing PC Cards Stop the PC Card by clicking the Safely Remove Hardware icon on the System tray. After the Safe to Remove Hardware message appears, it is safe to remove the PC Card. To remove the PC Card, press the eject button once.
Page 167 Before removing a PC Card, stop it by clicking the Safely Remove Hardware icon on the System tray. Once the PC Card has stopped, you can safely remove it. See Cards” on page 166. Never swap modules when the computer is in Hibernation or Standby mode.
Page 168: Chapter 7: If Something Goes Wrong
This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter. Your program stops responding.
Page 169 Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. Windows Task Manager Applications tab Select the program you want to close, then click End Task. Closing the failed program should allow you to continue working.
Page 170 If Something Goes Wrong Windows Task Manager Shutdown menu, Turn Off option The computer shuts down. Your program performs an illegal operation. If you receive the message, “ ,” you should record the details of the message and operation consult the software manufacturer. To record the details: Click the Details button and select the text the operating system displays.
Page 171: Problems When You Turn On The Computer
Problems when you turn on the computer These problems may occur when you turn on the power. The computer will not start. Make sure you attached the AC adapter and power cable properly or installed a charged battery. Press and hold down the power button for a few seconds. If you are using the AC adapter, check that the wall outlet is working by plugging in another device, such as a lamp.
Page 172: The Windows Operating System Is Not Working
If Something Goes Wrong The Windows The Windows working Once you are familiar with the desktop and used to the way the operating system responds to your work routine, you can easily detect if the operating system is not working correctly. For example: ❖...
Page 173: Internet Problems
The Windows ❖ Safe Mode (with Command Prompt) ❖ Enable Boot Logging ❖ Enable VGA Mode ❖ Last known good configuration (your most recent settings that worked) ❖ Directory services restore mode (Windows controllers only) ❖ Debugging Mode ❖ Start Windows ❖...
Page 174: The Windows Xp Operating System Can Help You
If Something Goes Wrong Resolving a hardware conflict ® The Windows XP operating system can help you If the operating system has started properly, but you still have a problem using your computer, the online Help can assist you in troubleshooting the problem. To access Windows Click Start, then click Help and Support.
Page 175: A Plan Of Action
A plan of action The smooth operation of the system depends on the interaction of all devices, programs, and features. If the system or one of its attached devices isn’t working, resolving the problem can be time-consuming and frustrating. The recommended procedure for getting multiple devices to work together is to add and set up one device at a time.
Page 176: Fixing A Problem With Device Manager
If Something Goes Wrong Resolving a hardware conflict theory, if every device connected to the computer is Plug and Play-compliant, no two devices will compete for the same system resources. Simply plug in the device and turn on your computer. The operating system automatically sets up your system to accommodate the new device.
Page 177 Disabling or enabling a device Click Start, click the My Computer icon with the secondary button, then click Properties. The System Properties dialog box appears. Click the Hardware tab. Click the Device Manager button. Select the specific device from the device category. To enable a device, look at the far right of the toolbar.
Page 178: Memory Card Problems
If Something Goes Wrong Resolving a hardware conflict Click the Device Manager button. To view the device(s) installed, double-click the device type. To view the properties, double-click the device. The operating system displays the Device Properties dialog box, which provides an array of tabs. They include: ❖...
Page 179: Power And The Batteries
If removing the memory module eliminates the error, the memory module may be faulty. If the error recurs without the memory module installed, the error is not caused by the memory module. Toshiba recommends using only memory approved by NOTE Toshiba. Power and the batteries...
Page 180: Keyboard Problems
Let the battery discharge completely, then try charging it again. Check the power options using the Toshiba Power Management Utility. Have you added a device, such as a PC Card or memory module, that takes its power from the...
Page 181: Display Problems
If the problem occurs when both the keypad overlays are off, make sure the software you are using is not remapping the keyboard. Refer to the software’s documentation and check that the program does not assign different meanings to any of the keys.
Page 182 If Something Goes Wrong Resolving a hardware conflict ❖ Try adjusting the contrast and brightness controls on the external monitor. ❖ Press priority is not set for the built-in screen. The screen does not look right. You can change the display settings by clicking a blank area of the desktop with the secondary control button, then clicking Properties.
Page 183: Disk Drive Problems
Click OK. The display mode is set to Simultaneous and the external display device does not work. Make sure the external monitor is capable of displaying at resolutions of 800 x 600 or higher. Devices that do not support this resolution will only work in Internal/External mode.
Page 184 If Something Goes Wrong Resolving a hardware conflict The drive’s properties box appears. Click on Properties. Click the Tools tab. Click the Check now button. The Check Disk box appears (for example, Check Disk You can choose one or both options: ❖...
Page 185: Dvd-Rom Or Multi-Function Drive Problems
DVD-ROM or multi-function drive problems You cannot access a disc in the drive. Make sure the drive tray has closed properly. Press gently until it clicks into place. Open the drive tray and remove the disc. Make sure the drive tray is clean.
Page 186: Sound System Problems
If Something Goes Wrong Resolving a hardware conflict The color of the materials used to make the disc can affect its reliability. Silver-colored CD-ROMs are the most reliable, followed by gold-colored CD-ROM. Green-colored CD- ROMs are the least reliable. Sound system problems You do not hear any sound from the computer.
Page 187 Card Information Structure When you insert a PC Card into a slot, the computer attempts to determine the type of card and the resources it requires by reading its Card Information Structure (CIS). Sometimes the CIS contains enough information for you to use the card immediately.
Page 188 If Something Goes Wrong Resolving a hardware conflict Resolving PC Card problems Here are some common problems and their solutions: The slots appear to be dead. PC Cards that used to work no longer work. Check the PC Card status: Click Start.
Page 189 The operating system displays a message that you may safely remove the card. Remove the card from the slot. Never swap modules when the computer is in Hibernation or Standby mode. This is known as “warm swapping” and is not supported with this computer For more information on Hibernation and Standby modes, on page 95...
Page 190: Printer Problems
If Something Goes Wrong Resolving a hardware conflict Printer problems This section lists some of the most common printer problems: The printer will not print. Check that the printer is connected to a working power outlet, turned on and ready (on line). Check that the printer has plenty of paper.
Page 191: Modem Problems
Modem problems This section lists common modem problems: The modem will not receive or transmit properly. Make sure the cable from the modem to the telephone line is firmly connected to the computer’s modem port and the telephone line jack. Check the port settings to make sure the hardware and software are referring to the same COM port.
Page 192 If Something Goes Wrong Develop good computing habits On a regular basis, back up the information stored on your hard disk. Here are some ways you can do this: ❖ Copy files to a CD or other media, following the steps in “Saving your work”...
Page 193: If You Need Further Assistance
GO, and then clicking the Detailed Specs link from the menu on the left, or just refer to the computer documentation shipped with your product. For the number of a Toshiba dealer near you in the United States, call: (800) 457-7777. If Something Goes Wrong If you need further assistance ®...
Page 194: Contacting Toshiba
Contacting Toshiba If you still need help and suspect that the problem is hardware-related, Toshiba offers a variety of resources to help you. You can access Toshiba on the Internet using any Internet browser by typing Toshiba voice contact Before calling Toshiba, make sure you have: ❖...
Page 195: Other Toshiba Internet Web Sites
Other Toshiba Internet Web sites toshiba.com computers.toshiba.com www.toshiba.ca www.toshiba-Europe.com www.toshiba.co.jp/index.htm http://servicio.toshiba.com Toshiba’s worldwide offices Australia Toshiba (Australia) Pty. Limited 84-92 Talavera Road North Ryde NSW 2113 Sydney Australia Belgium Toshiba Information Systems Benelux (Belgium) B.V. Excelsiorlaan 40 B-1930 Zaventem Belgium Czech Republic CHG Toshiba, s.r.o.
Page 196 Irvine, California 92618 United States 800-457-7777 (within the US) 949-859-4276 (outside the US - this call may incur long distance charges) France Toshiba Systèmes (France) S.A. 7, Rue Ampère 92804 Puteaux Cédex France Greece Ideal Electronics S.A. 109 Syngrou Avenue...
Page 197 Mexico Toshiba de México S.A. de C.V. Sierra Candela No.111, 6to. Piso Col. Lomas de Chapultepec. CP 11000 Mexico, DF. Tel: 5249-6500 The Netherlands Toshiba Information Systems Benelux B.V. Rivium Boulevard 41 2909 LK, Capelle a/d IJssel The Netherlands Papua New Guinea Fujitsu (PNG) Pty.
Page 198 If Something Goes Wrong Toshiba’s worldwide offices Spain Toshiba Information Systems (España) S.A. Parque Empresarial San Fernando Edificio Europa, 1a Planta Escalera A 28831 (Madrid) San Fernando de Henares Spain Switzerland Ozalid AG Herostrasse 7 8048 Zürich Switzerland United States Toshiba America Information Systems, Inc.
Page 199: Appendix A: Hot Keys
Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the key, turn system functions on and off. Hot keys have a legend on or above the key indicating the option or feature the key controls. Instant password security Without a password The Fn + F1 key combination turns off the display and...
Page 200: Maintaining Security When The Battery Is Not Fully Charged
Hot Keys Instant password security the display’s content reappear. The Windows system log-on screen will appear, prompting you for a password. After typing in the password for the current user, press Enter. To activate the password feature: Click Start, Control Panel. Click Appearances and Themes.
Page 201: Sound
Sample power usage modes The power usage mode in the Windows under AC power is Full Power only. The properties of each mode are set in the Toshiba Power Management utility. This hot key cycles through the different alarm Hot Keys Sound ®...
Page 202: Stand By Mode
Hot Keys Stand by mode Stand by mode This hot key puts the computer into Stand by mode. Sample Stand by confirmation box ❖ A message box is displayed by default to confirm that the computer is going into Stand by mode. This message box can be set so it doesn’t display.
Page 203: Hibernation Mode
Hibernation mode This hot key puts the computer into Hibernation mode. Sample Hibernation confirmation box Hibernation mode ❖ If Hibernation mode is enabled (the default) a message box is displayed by default to confirm the computer is going into Hibernation mode. The message box can be set so it doesn’t display.
Page 204: Display Modes
Hot Keys Display modes Display modes This hot key cycles through the power-on display options. The display modes are: Sample display options window In o resolution of the internal display panel to match the resolution of the external display device. ❖...
Page 205: Enabling A Wireless Device
Enabling a wireless device This hot key enables/disables the optional wireless devices in your computer. The wireless mode is: Wi-Fi enabled—This enables the Wi-Fi antenna Disabling or enabling the TouchPad This hot key enables/disables the TouchPad. To use the TouchPad, see TouchPad”...
Page 206: Appendix B: Power Cable Connectors
Appendix B Power Cable Connectors Your notebook computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cable connectors for various parts of the world. USA and Canada UL approved CSA approved Australia AS approved...
Page 207: Appendix C: Using Configfree™ With Your Toshiba Computer
Appendix C Using ConfigFree™ with your Toshiba Computer ConfigFree™ is a set of utilities used for configuring networks that use both wired and wireless network devices. These utilities include the following: ❖ Connectivity Doctor — The Connectivity Doctor utility is used to help fix networking problems with your notebook computer.
Page 208: Getting Started
Quick Connect — The Quick Connect utility is used to configure a wireless LAN connection (ad hoc connection) between a personal computer and a Toshiba Wireless Projector. The Toshiba Wireless Projector utility must be installed in order to enable Quick Connect. For...
Page 209: Starting Configfree
Help — Displays the online help file. Starting ConfigFree To start ConfigFree, do any of the following: ❖ (Microsoft and then point to All Programs. Point to the TOSHIBA ConfigFree folder, and then click ConfigFree. ❖ (Microsoft button, and then point to Programs. Point to the TOSHIBA ConfigFree folder, and then click ConfigFree.
Page 210: Configfree Utilities
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities ❖ Right-click the ConfigFree icon on the taskbar, and then click Options. For more information on configuring ConfigFree, see the online help. ConfigFree Utilities Connectivity Doctor The Connectivity Doctor displays the connection configuration and the status of all wired and wireless LAN devices that are connected to the network.
Page 211: Device Settings
Using ConfigFree™ with your Toshiba Computer The Connectivity Doctor The Connectivity Doctor screen automatically refreshes. However, you can also use the Refresh button to refresh the screen. Device Settings The Device Settings screen displays a list of all wired, wireless, and infrared (for systems with infrared) devices that are connected to the network.
Page 212 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Viewing the device settings ❖ Network Connections — Displays the Network Connection window, which contains detailed information about the network connection. ❖ Enable/Disable — You can easily enable or disable any of the listed devices simply by selecting the desired device, and then clicking the Enable/Disable button.
Page 213: Profile Settings
Using ConfigFree™ with your Toshiba Computer Profile Settings The Profile Settings utility displays a list of all the registered profiles in ConfigFree. You can also add, modify, and delete profiles; switch the profile being used; and view specific details about each profile.
Page 214: Quick Connect
Toshiba Wireless Projector. As a result, you will not be able to use the network to connect to a Toshiba Wireless Projector when the wireless LAN Configuration is set to Ad hoc. If you are connected to an access point, the connection will be broken and later re- established.
Page 215: Using Auto Switch
❖ If the Toshiba Wireless Projector utility is closed. ❖ If you select Toshiba Wireless Projector (DPJ) from the ConfigFree tray menu (this will disconnect the wireless LAN connection). ❖ If you select a profile from the ConfigFree tray menu or when you disable a wireless device.
Page 216: Auto Switch (Cable Disconnect)
Using ConfigFree™ with your Toshiba Computer Using Auto Switch ❖ From the Profile Settings screen, you can click the Auto Switch button. Auto Switch (Cable Disconnect) If a wired network cable is disconnected from the network, the Auto Switch (Cable Disconnect) option will automatically switch to another network device.
Page 217: Glossary
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms The following acronyms may appear in this user’s guide. BIOS CD-ROM CD-RW CMOS COM1 COM2 alternating current basic input/output system bits per second compact disc compact disc read-only memory compact disc rewrite memory...
Page 218 Glossary DIMM DSTN DVD-ROM digital versatile (or video) disc read-only memory EPROM HTML IEEE LPT1 MIDI NTFS direct memory access dual inline memory module disk operating system dots per inch dual supertwist nematic digital versatile (or video) disc enhanced capabilities port erasable programmable read-only memory file allocation table Federal Communications Commission...
Page 219 PCMCIA SCSI SDRAM SRAM SVGA Terms The following terms may appear in this user’s guide. active-matrix display — A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology. Also known as a “TFT display,” in its simplest form there is one thin film transistor (TFT) for each cell.
Page 220 Glossary alternating current (AC) — The type of power usually supplied to residential and commercial wall outlets. AC reverses its direction at regular intervals. Compare direct current (DC). application — A computer program that you use to perform tasks of a specific type.
Page 221 bus — An electrical circuit that connects the central processing unit (CPU) with other parts of the computer, such as the video adapter, disk drives, and ports. It is the pathway through which data flows from one device to another. See also bus speed, frontside bus. bus speed —...
Page 222 Glossary compatibility — The extent to which computers, programs, or devices can work together harmoniously, using the same commands, formats, or language as another. configuration — (1) The collection of components that make up a single computer system. (2) How parts of the system are set up (that is, configured).
Page 223 disable — To turn a computer option off. See also enable. disc — A round, flat piece of metal, designed to be read from and written to by optical (laser) technology, and used in the production of optical discs, such as CDs and DVDs. Compare disk. disk —...
Page 224 Glossary DVD-ROM (digital versatile [or video] disc read-only memory) — A very high-capacity storage medium that uses laser optics for reading data. Each DVD-ROM can hold as much data as several CD-ROMs. Compare CD-ROM. emulation — A technique in which a device or program imitates another device or program.
Page 225 — The physical components of a computer system. Compare software. Hibernate — A feature of many Toshiba notebook computers that saves to the hard disk the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off.
Page 226 Glossary interlaced — A method of refreshing a computer screen, in which only every other line of pixels is refreshed. Interlaced monitors take two passes to create a complete screen image. Compare non-interlaced. internal device — See device. Internet — The decentralized, world-wide network of computers that provides electronic mail, the World Wide Web, and other services.
Page 227 megabyte (MB) — A unit of data equal to 1,048,576 bytes (1024 x 1024 bytes). See also bytes. memory — Typically refers to the computer’s main memory, where programs are run and data is temporarily stored and processed. Memory can be volatile and hold data temporarily, such as RAM, or it can be nonvolatile and hold data permanently, such as ROM.
Page 228 Glossary NT file system (NTFS) — An advanced file system designed for use specifically with the Windows NT operating system. online — Available through the computer. Online may refer to information being read from your own computer’s hard disk, such as online documentation or online help, or to information coming from another company on a company network or the Internet.
Page 229 processor — See central processing unit (CPU). program — A set of instructions that can be executed by a computer. The general classes of programs (also called software) are operating system, application, and utility. See also operating system, application, utility. properties —...
Page 230 Glossary ROM (read-only memory) — Non-volatile memory that can be read but not written to. By non-volatile, we mean that information in ROM remains whether or not the computer is receiving power. This type of memory is used to store your computer’s BIOS, which is essential instructions the computer reads when you start it up.
Page 231 universal serial bus (USB) 2.0— A serial bus that supports a data transfer rate of up to 480 Mbps (480 million bits per second). USB can connect up to 127 peripheral devices through a single all- purpose USB port. USB allows hot swapping of peripherals. See also bus, hot swapping, serial.
Page 232: Index
CD Player 89 CD/DVD control 42 DVD-ROM or multi-function Internet 41 PC Card eject 39 power 41 Start 119 TOSHIBA Console 41 calculator 132 caps lock light 43 Card and Socket Services 164 CD and DVDs caring for 91 viewing contents 90...
Page 233 problem solving 185 channels DMA 175 Character Map 133 charging main battery 105 RTC (real-time clock) battery 106 checking device properties 177 cleaning CD or DVDs 91 computer 72 click 61 closing programs 132 comfort chair 48 lighting 49 work habits 50 commands Hibernate 95 powering down 93...
Page 234 system tray 120 taskbar 119 Device Manager 176 checking properties 177 disabling a device 177 dial-up connection 93 Dial-Up Networking Wizard 93 Digital Subscriber Lines (DSL) 156 disk activity light 43 Disk Defragmenter 184 disk drive corrupted/damaged data files 184 missing files/trouble accessing a disk 183 running slow 184...
Page 235 printing 81 saving 75 transferring 155 Fn key 42 folders 120 displaying information 151 front panel 42 function keys 42 hard disk drive light 43 hardware conflicts 174 resolving 176 headphone jack 40 Help 141 Hibernate restarting 99 using 98 Hibernation 95 Hibernation mode 72 hiding windows 129...
Page 236 overlay keys 78 unexpected characters 180 Windows special keys 78 lights 43 AC power 59 battery 59 caps lock 43 cursor control mode 44 disk activity 43 DVD-ROM/multi-function drive hard disk drive 43 numeric mode 44 on/off 42 lock slot 39 main battery changing 111 removing 111...
Page 237 185 computer hangs when PC Card inserted 188 computer will not power up 171 contacting Toshiba 193 corrupted/damaged data files 184 Device Manager 176 disabling a device 177 disk drive is slow 184 display is blank 181...
Page 238 disk 183 modem not receiving or transmitting 191 no sound 186 non-system disk or disk error 171 PC Card 186 checklist 187 error occurs 189 hot swapping fails 188 not recognized 189 slots appear dead 188 Plug and Play 176 power and batteries 179 printer 190 program not responding 168...
Page 239 151 Toshiba Forum 194 Internet Web sites 195 online services 194 Toshiba Accessories information 34 TOSHIBA Console button 41 TouchPad 42 using 121 using with control buttons 121 transferring files 155 transferring information between computers 155...
Page 240 SelectServ 35 Web address 158 Web browsers 157 Web content interface 147 Web sites 194 Web sites,Toshiba 195 windows hiding 129 repositioning 129 resizing 129 Windows Explorer 127 Windows Help 119 Windows Media Player 88 Windows Standby 71 Windows XP...

This manual is also suitable for:

P15-s420 P10-s429 P15-s409 P10-s4291 P15-s4201 Psp10u-0dxpgr ... Show all

Toshiba P15-S4091 User Manual

Chapter 1: Finding Your Way Around

Chapter 2: Getting Started

Chapter 3: Learning the Basics

Chapter 4: Mobile Computing

Chapter 5 : Getting to Know the Windows

Chapter 6: Exploring Your Options

Chapter 7: If Something Goes Wrong

Appendix A: Hot Keys

Appendix B: Power Cable Connectors

Appendix C: Using Configfree™ with Your Toshiba Computer

Quick Links

Related Manuals for Toshiba P15-S4091

Summary of Contents for Toshiba P15-S4091