Table of Contents
Advertisement
6-1.
Upgrading Software Programs
Software programs stored in the ROM (IC401) on the AT-189 board is upgraded by using a USB drive.
The software programs include camera application and operating system (OS), which is independently upgraded.
Use the following procedures to upgrade the software programs.
6-1-1.
Upgrading Camera Application
Equipment Required
USB drive (commercially available)
Tip
For recommended USB drive, refer to "Using a USB Drive" in the operation manual.
Preparation
Copy the camera application update data to the USB drive using the following procedure.
Note
For how to obtain the version update data file (hdc4300_app.pkg), contact your local Sony Sales Office/Service Center.
1.
Create the following directory in the USB drive.
\MSSONY\PRO\CAMERA\HDC4300
2.
Copy the version update data file "hdc4300_app.pkg" to the directory created.
Procedure
1.
Connect the USB drive that contains the version update program to the USB connector of this unit.
2.
Turn on the unit.
3.
Display the "ROM VERSION" page of the DIAGNOSIS menu.
4.
Confirm that the cursor "?" is displayed to the left of D03, and then press the ENTER button long.
5.
Updatable items become selectable. Select "CAMERA APP" and then press the ENTER button.
6.
A message "VERSION UP OK?" appears. Select "YES."
7.
The unit restarts automatically and the version update starts.
Upon completion of the version update, a message "UPDATE SUCCEEDED" appears.
8.
Turn off and on the unit and confirm that the version has been updated on the "ROM VERSION" page of the
DIAGNOSIS menu.
6-1-2.
Upgrading OS
Equipment Required
USB drive (commercially available)
Tip
For recommended USB drive, refer to "Using a USB Drive" in the operation manual.
HDC4300
Section 6
Software Upgrade
6-1
Advertisement
Table of Contents
