Table of Contents
Advertisement
E-Mon® Series Global User Manual
3.2.1. Rotating Terminals
The device is easy to connect using the rotating terminals as per the available mounting (rail
or wall mounting). Kindly refer to the Hardware Installation Guide for details on mounting
instruction.
The rotating terminals are designed with locks to secure vacant/unused ports and meter
connection. The rotating terminals shall be used with care for safety reasons.
•
Unscrew the terminals completely at first for using the rotating terminals.
•
Gently pull out the grey rotating terminals from top and bottom.
•
Rotate the grey rotating terminals as per wiring is required.
•
Fix the rotating caps by keeping them parallel to the port and clipping them back at
the top and bottom ends.
•
Once the terminals are mounted, the wires can be fixed with screws as mentioned in
safety instructions.
•
The connection wires shall be joined via the connector terminals marked as L1, L2, L3
and N. Please pay attention to the current sensor polarity (white = positive =S1) as
mentioned in the instruction sheet.
•
Once the terminals are locked in and complete connections are made, users can seal
the terminals using the red slider sealing button available at the top and bottom of the
rotating terminals.
NOTE
•
Never open the terminal when the meter is charged.
•
The grey rotating terminal blocks must be clipped and fixed to the meter before
wiring.
Page | 16
Figure 2. Rotating Terminal
Overview
54-000-01-ENG01-0121
Hide quick links:
Advertisement
Table of Contents
