Page 1 Satellite ® Series User’s Guide If you need assistance: Toshiba’s Support Web site pcsupport.toshiba.com Toshiba Global Support Centre Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see page 181 in this guide.
Page 2 TOSHIBA AMERICA INFORMATION SYSTEMS, INC. (“TOSHIBA”), ITS AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA,...
Page 3 Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's parallel port, monitor port, USB port, PS/2 port port and microphone jack.
Page 4: Fcc Requirements
This device must accept any interference received, including interference that may cause undesired operation. Contact either: Toshiba’s Support Web site at pcsupport.toshiba.com. Or call the Toshiba Global Support Centre: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Industry Canada Requirement This Class B digital apparatus complies with Canadian ICES-003.
Page 5 If trouble is experienced with this equipment, for repair or limited warranty information, please contact Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba, or the Toshiba Support Centre within the United States at (800) 457-7777 or Outside the United States at (949) 859-4273.
Page 6 provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.) In order to program this information into your fax transmission, refer to the fax software instructions installed on this computer. Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm...
Page 7: Wireless Interoperability
USOC RJ11C. Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: The IEEE 802.11 Standard on Wireless LANs (Revision A/B/G), as defined...
Page 8 The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits. Nevertheless, the TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation is minimized. In normal operating configuration, the LCD in the upright position, the distance between the antenna and the user should not be less than 20 cm.
Page 9 documentation that comes with the product. This device complies with the following radio frequency and safety standards. Canada – Industry Canada (IC) This device complies with RSS 210 of Industry Canada. The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population;...
Page 10 EU Declaration of Conformity TOSHIBA declares, that the product: PLU10* conforms to the following Standards: This product is carrying the CE-Mark in accordance with the related European Directives. Responsible for CE-Marking is TOSHIBA Europe, Hammfelddamm 8, 41460 Neuss, Germany. VCCI Class B Information...
Page 11 2. If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. 3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations.
Page 12 The interference range of this equipment is less than 40m. 2,400 MHz to 2,483.5 MHz. It is possible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-13-1100...
Page 13 The following restrictions apply: Do not disassemble or modify the device. Do not install the embedded wireless module into other device. 5.17 GHz to 5.23 GHz for indoor use only. Radio Approvals for Wireless Devices NOTE The following information is dependent on what type of wireless device is in your computer.
Page 14 Europe - Restrictions for use of 2.4 GHz Frequencies in European Community Countries België/ For private usage outside buildings across public grounds over less than Belgique: 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m.
Page 15 802.11a (5 GHz) Australia Canada France Ireland Luxembourg Norway Switzerland Turbo Mode (5 GHz) Canada Europe - Restrictions for use of 5 GHz Frequencies in European Community Countries European Community Countries Austria Belgium, France, Switzerland/Lichtenstein Denmark, Finland, Germany, Greece, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Sweden, UK...
Page 16 This device must not be operated in ad-hoc mode using channels in the 5 GHz bands in the European Community. Ad-hoc mode provides a direct communication between two client devices without a Wireless LAN Access Point. This device must be used with Access Points that have employed and activated a radar detection feature required for European Community operation in the 5 GHz bands.
Page 17 802.11a (5 GHz) Australia Canada France Ireland Luxembourg Norway Switzerland Turbo Mode (5 GHz) Canada Approved Countries/Regions for use for the Intel Wireless LAN 2100 3B Mini PCI Adapter This equipment is approved to the radio standard by the countries/regions in the following table.
Page 18 Wireless Technology Interoperability ® Bluetooth Cards from TOSHIBA are designed to be interoperable with any product with Bluetooth wireless technology that is based on Frequency Hopping Spread Spectrum (FHSS) radio technology, and is compliant to: Bluetooth Specification as defined and approved by The Bluetooth Special Interest Group.
Page 19 Always use Bluetooth cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA PC product support on Web site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or pcsupport.toshiba.com in the United States for more information.
Page 20 The radiated output power of the Bluetooth Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized.
Page 21 2. If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. 3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations.
Page 22 This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is impossible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-13-1100 Direct Dial: 03-3457-5916...
Page 23 Multi-drive or any other optical drive. You could damage the drive. You would also be exposed to laser light or other safety hazards, resulting in serious injury. Always contact an authorized Toshiba service provider, if any repair or adjustment is required.
Page 24 Copyright This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 25 Dolby Laboratories. Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Toshiba is under license. Other trademarks and trade names are those of their respective owners.
Page 26: Table Of Contents
Keeping yourself comfortable ...40 Precautions...40 Important information on your computer’s Setting up your computer ...43 Setting up your software...44 Registering your computer with Toshiba ...45 Adding external devices ...46 Connecting to a power source ...47 Using the main battery...50 cooling fan ...43...
Page 27 Using the computer for the first time ...51 Opening the display panel ...51 Your computer’s features and specifications ...52 Turning on the power...52 Adding memory (optional) ...53 Installing a memory module ...54 Removing a memory module...59 Using the TouchPad Scrolling with the TouchPad Control buttons ...62 Disabling or enabling the TouchPad ...62 Using the Dual Mode Pad ...64...
Page 28 Playing an audio CD...99 Playing CDs using Auto-Run...101 Creating a CD ...101 Removing a disc with the computer on...102 Removing a disc with the computer off ...103 Caring for CD or DVD Discs ...103 Toshiba’s online resources ...104 components ...95 ® Explorer...88...
Page 29 Chapter 3: Mobile Computing...105 Toshiba’s energy-saver design...105 Running the computer on battery power ...105 Battery Notice ...106 Power management ...107 Using additional batteries ...107 Charging batteries...108 Charging the main battery...108 Charging the RTC battery...109 Monitoring main battery power...110 Determining remaining main battery power ...112 What to do when the main battery runs low ...114...
Page 30 Using an ExpressCard Inserting an ExpressCard ...144 Removing an ExpressCard ...145 Using the Bridge Media Adapter Slot ...146 Inserting memory media...146 Removing memory media...147 Chapter 5: Toshiba Utilities...148 TOSHIBA Assist ...149 Connect...150 Secure...150 Protect & Fix ...151 Optimize...152 TOSHIBA SD Setting passwords ...154...
Page 31 Mouse Utility...161 TOSHIBA Hardware Setup...162 TOSHIBA Zooming Utility...164 TOSHIBA Button Controls ...165 CD/DVD Drive Acoustic Silencer ...166 TOSHIBA Accessibility ...167 Fingerprint Authentication Utility...168 Fingerprint utility limitations ...168 Fingerprint Enrollment ...168 Fingerprint Logon ...170 Power-on Security ...170 Control Center...172 Password Bank ...174 Care and maintenance of your fingerprint Fingerprint sensor limitations ...180...
Page 32 Wireless networking problems...208 DVD operating problems...211 Develop good computing habits ...214 Data and system configuration backup in If you need further assistance...221 Before you contact Toshiba ...221 Contacting Toshiba ...222 Other Toshiba Internet Web sites...223 Toshiba’s worldwide offices...223 Appendix A: Hot Keys...225 Volume Mute ...225...
Page 33 Computer... 235 Getting Started...236 Starting ConfigFree ...236 ConfigFree Utilities...238 Connectivity Doctor ...238 Search for Wireless Devices ...241 Profile Settings ...246 ConfigFree SUMMIT...250 Quick Connect...254 Using the Automatic Switch...257 Semi-Automatic Switch Feature ...257 Glossary... 259 Index... 274 Contents ™ with your Toshiba...
Page 34: Introduction
Introduction Welcome to the world of powerful, portable, multimedia computing. With your Toshiba notebook computer, your work and entertainment can accompany you wherever you Certain Microsoft NOTE computer may use technological measures for copy protection. IN SUCH EVENT, YOU WILL NOT BE ABLE TO USE THE PRODUCT IF YOU DO NOT FULLY COMPLY WITH THE PRODUCT ACTIVATION PROCEDURES.
Page 35: This Guide
Toshiba's Web site at pcsupport.toshiba.com. While Toshiba has made every effort at the time of publication to ensure the accuracy of the information provided herein, product specifications, configurations, prices, system/ component/options availability are all subject to change without notice.
Page 36: Safety Icons
Introduction Safety icons Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and icons highlight these instructions as follows: Indicates an imminently hazardous situation which, if not...
Page 37: Other Icons Used
Your computer comes with the following documentation: An electronic version of the user’s guide It may also contain guides for other programs that may come with your system. For accessory information, visit Toshiba’s Web site at accessories.toshiba.com. Introduction Other documentation...
Page 38: Service Options
To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com. If you have a problem or need to contact Toshiba, see Something Goes Wrong” on page 181. “If...
Page 39: Chapter 1: Getting Started
Chapter 1 Getting Started This chapter provides tips for working comfortably, summarizes how to connect components, and explains what to do the first time you use your notebook computer. Selecting a place to work Your computer is portable and designed to be used in a variety of circumstances and locations.
Page 40: Keeping Yourself Comfortable
Extreme heat, cold, or humidity. Liquids and corrosive chemicals. Keeping yourself comfortable The Toshiba Instruction Manual for Safety and Comfort, that shipped with your computer, contains helpful information for setting up your work environment and tips for working comfortably throughout the day.
Page 41 Getting Started Selecting a place to work Never allow any liquids to spill into any part of your computer, and never expose the computer to rain, water, seawater or moisture. Exposure to liquid or moisture can cause electric shock or fire, resulting in damage or serious injury. If any of these eventualities should accidentally occur, immediately: 1.
Page 42 Getting Started Selecting a place to work Some PC Cards can become hot with prolonged use. Overheating of a PC Card can result in errors or instability in its operation. Before you remove a PC Card, always wait for it to cool. You could get burned removing a hot PC Card.
Page 43: Important Information On Your Computer's Cooling Fan
Important information on your computer’s cooling fan Your computer may have a CPU cooling fan that cools the CPU by drawing outside air into the computer. The cooling fan may be located on the bottom of the computer. To prevent possible overheating of the CPU, make sure the air intake on the cooling fan is not blocked.
Page 44: Setting Up Your Software
Getting Started Setting up your computer To register your computer online or to sign up for an Internet account, you must either connect the built-in modem to a telephone line or establish a Local Area Network (LAN) connection. See on page 131.
Page 45: Registering Your Computer With Toshiba
If you opt not to register at that time, you can either double-click the icon on your desktop or go to the Toshiba Web site at register.toshiba.com. Customer failure to complete Product Registration will not diminish Customer rights under this limited Warranty.
Page 46: Adding External Devices
Getting Started Adding external devices Adding external devices NOTE Before adding external devices or memory, Toshiba recommends setting up your software. See software” on page After starting your computer for the first time you may want Add more memory (see page 53).
Page 47: Connecting To A Power Source
As a general safety precaution, avoid touching any metal parts. Always use the Toshiba AC adapter that was provided with your computer, or use Toshiba recommended alternate models to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adapter could cause fire or damage to the computer, possibly resulting in serious injury.
Page 48 Getting Started Connecting to a power source To connect AC power to the computer: Connect the power cord/cable to the AC adapter. Sample connecting the power cord/cable to the AC adapter Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
Page 49 Connecting to a power source The AC power light on the indicator panel glows blue. Never tamper with the cord/cable or plug; never splice or alter a cord/cable; never bend or twist a cord/cable; never place heavy objects on a cord/cable; never place a cord/cable near a heat source;...
Page 50: Using The Main Battery
Getting Started Using the main battery Flashes amber when the main battery charge is low and it is time to recharge the main battery or plug in the AC adapter NOTE If the AC power light flashes amber during charging, either the main battery is malfunctioning, or it is not receiving correct input from the AC power supply.
Page 51: Using The Computer For The First Time
Using the computer for the first time The computer is now ready for you to turn it on and begin using it. Opening the display panel Slide the display latch to the right. Lift the display panel. Sample opening the display panel To avoid damaging the display panel, do not force it beyond the point where it moves easily and never lift the computer by the display panel.
Page 52: Your Computer's Features And Specifications
Getting Started Using the computer for the first time Your computer’s features and specifications Certain notebook chassis are designed to accommodate all possible configurations for an entire product Series. Your select model may not have all the features and specifications corresponding to all of the icons or switches shown on the notebook chassis, unless you have selected all those features.
Page 53: Adding Memory (Optional)
Adding memory (optional) HINT: To purchase additional memory modules, see the accessories information packaged with your system or visit accessories.toshiba.com. Your computer comes with enough memory to run most of today’s popular applications. You may want to increase the computer’s memory if you use complex software or process large amounts of data.
Page 54: Installing A Memory Module
For more information on memory options, check the accessories information that came with your computer, or visit accessories.toshiba.com. NOTE Before adding external devices or memory, Toshiba recommends setting up your software. See software” on page Installing a memory module Additional memory modules can be installed in the memory module slots on the base of the computer.
Page 55 If the computer is on, begin at step 1; otherwise, skip to step If the computer is on, click Start, Turn off (or Shut Down, depending on the system). The Turn off computer window appears. Click Turn Off. The operating system turns off the computer. Unplug and remove any cables connected to the computer, including the AC adapter.
Page 56 Getting Started Adding memory (optional) Using a standard Phillips No. 1 screwdriver, unscrew the screw that secures the memory module slot cover. Sample unscrewing the memory module slot cover Remove the memory slot cover. Place the screw and the cover in a safe place so that you can retrieve them later.
Page 57 Insert the memory module into the socket on the underside of the computer. Sample inserting the memory module into the slot Hold the memory module by its edges so that the gold connector bar faces the slot, at approximately a 45 to the socket.
Page 58 Getting Started Adding memory (optional) Sample aligning the module into the socket Gently press down on the memory module connector until the clips snap into place. Sample pressing down on the memory module Do not force the memory module into position. The memory module should be completely inserted into the socket and level when secured in place.
Page 59: Removing A Memory Module
Restart the computer. TECHNICAL NOTE: You must have at least one memory module installed for the computer to work. You can now continue setting up the computer. When the operating system has loaded, you can verify that the computer has recognized the additional memory module. If you are adding an extra memory module after setting up the computer, verify that the computer has recognized it correctly as described in...
Page 60 Getting Started Adding memory (optional) Pull the clips away from the memory module. The memory module pops up slightly. Gently lift the memory module to a 45 degree angle and slide it out of the slot. of computer Sample removing the memory module Replace the memory module slot cover and tighten the screw.
Page 61: Using The Touchpad
Checking total memory When you add or remove a memory module, you can check that the computer has recognized the change. To do this: Click Start, Control Panel, Performance and Maintenance, and then System. The General tab view automatically appears and shows total memory.
Page 62: Scrolling With The Touchpad
Getting Started Using the TouchPad™ Once you have positioned your cursor, you can click it into place by either double-tapping the TouchPad or clicking the control buttons. Scrolling with the TouchPad There are two active regions on the TouchPad that allow you to scroll as you would with any wheel device on a mouse or trackball.
Page 63 The TouchPAD ON/OFF tab view window appears. Sample TouchPAD ON/OFF screen Select Disable or Enable, whichever is appropriate. Click Apply. Click OK. The Mouse Properties window closes. Close the Printers and Other Hardware window. Close the Control Panel window. You can also use a hot key to disable or enable the TouchPad. “Disabling or enabling the TouchPad or Dual Mode Pad”...
Page 64: Using The Dual Mode Pad
Getting Started Using the Dual Mode Pad Using the Dual Mode Pad (Available on certain models) The Dual Mode Pad (available on certain models), the small square cutout located in front of the keyboard, is sensitive to touch. To move the cursor, simply move your finger on the Dual Mode Pad in the direction you would like to move the cursor: To move the cursor to the top of the page, push your...
Page 65: Scrolling With The Dual Mode Pad
Scrolling with the Dual Mode Pad There are two active regions on the Dual Mode Pad that allow you to scroll as you would with any wheel device on a mouse or trackball. To scroll vertically, run your finger up or down along the right edge of the Dual Mode Pad.
Page 66: Using The Virtual Buttons
Getting Started Using the Dual Mode Pad Maximize the current application Run a program of your choice Tap zones can be enabled or changed in the Mouse Properties dialog box. Using the Virtual Buttons The Dual Mode Pad has six virtual buttons and a volume control bar.
Page 67: Disabling Or Enabling The Dual Mode Pad
Tap the virtual button assigned to the application you wish to launch, or slide your finger on the volume control bar to adjust the volume to the desired level. When the operation is complete, the Dual Mode Pad automatically disables the virtual buttons. The virtual buttons cannot be used until the mode switch button is tapped again.
Page 68: Using External Display Devices
Getting Started Using external display devices Close the Control Panel window. The Fn + F9 shortcut can be used to disable or enable the Dual NOTE Mode Pad (see Mode Pad” on page Using external display devices Your computer comes with a built-in LCD display, but you can also connect an external display device to the available video ports: An external monitor or projector via the RGB (monitor)
Page 69: Directing The Display Output When You Turn On The Computer
Turn on the external device. Set the display mode by pressing configuring the Display Properties settings. Directing the display output when you turn on the computer Once you have connected an external display device, you can choose to use the internal display only, the external device only, or both simultaneously.
Page 70: Adjusting The Quality Of The External Display
Getting Started Using an external keyboard Release the TECHNICAL NOTE: You can also change these settings using the Display Properties Box. Set the option for the video controller by clicking Start, Control Panel, Appearance and Themes, and then Display. Choose the Settings tab, click the Advanced button, select Display Device, select the applicable Monitor type, and click Apply or OK.
Page 71: Using A Mouse
Using a mouse You may want to use a mouse instead of the computer’s built- in Dual Mode Pad. You can use a USB-compatible mouse. After logging on to your system, the mouse cursor may move NOTE to the upper-right side of the screen. If this occurs, push the or Windows key to return it to its original position.
Page 72: Setting Up Your Printer
Getting Started Connecting a printer If your printer does not support Plug and Play, you must set up the printer as described in the page To connect a USB printer to your computer: Connect the printer cable to the printer and then connect the other end to one of the computer’s USB ports.
Page 73: Connecting An Optional External Diskette Drive
Connecting an optional external diskette drive The Add Printer Wizard appears. Sample Add Printer Wizard Follow the on-screen instructions to set up your printer. Connecting an optional external diskette drive Some operations, such as creating a password service diskette, require a diskette drive designed for use with 3.5- inch diskettes.
Page 74: Turning Off The Computer
Getting Started Turning off the computer To connect an optional external USB diskette drive, connect the cable to one of the computer’s USB ports. Sample connecting an optional external USB diskette drive Turning off the computer Pressing the power button before shutting down the Windows work.
Page 75: Hibernation Mode
Turn Off or Shut Down Factors to consider when choosing either Turn Off or Shut Down: Use the Turn Off command if you are using Windows XP Home, or either Windows ® Windows XP Media Center Edition (MCE) and are not connected to a domain server.
Page 76: Standby Mode
Getting Started Turning off the computer Because the state of the system is stored on the hard disk, no data is lost if the main battery discharges. When starting up again, Hibernation takes less time and consumes less main battery power than does turning off the computer.
Page 77: Using The Turn Off Computer Or Shut Down Commands
When starting up again, the computer returns to the mode in which you left it, including all open programs and files you were using. If you power down using the Standby command and the main battery discharges fully, your unsaved information will be lost. Be sure to save your work first.
Page 78: Using And Configuring Hibernation Mode
Getting Started Turning off the computer Shut Down For Windows connected to a domain server, follow these steps to turn off the computer: Click the Start button, then Shut down. The Shut Down Windows Select Shut down from the drop-down list. Click OK.
Page 79: Using And Configuring Standby Mode
Getting Started Turning off the computer Configuring Hibernation mode options You can place the computer into Hibernation mode by either pressing the power button or closing the display panel. You can also specify an amount of time after which the computer automatically goes into Hibernation mode.
Page 80: Closing The Display Panel
Getting Started Turning off the computer The computer saves the status of all open programs and files, turns off the display, and enters into a low-power mode. The on/off light blinks amber indicating the computer is in Standby mode. Configuring Standby mode options You can place the computer into Standby mode by either pressing the power button or closing the display panel.
Page 81: Caring For Your Computer
You may want to secure your computer to a heavy object such as your desk. The easiest way to do this is to purchase an optional computer lock cable. For more information on purchasing a cable lock. visit accessories.toshiba.com. Getting Started Caring for your computer “Running the computer on battery...
Page 82 Getting Started Caring for your computer Sample computer lock cable To secure the computer: Wrap the cable through or around some part of a heavy object. Make sure there is no way for a potential thief to slip the cable off the object.
Page 83: Chapter 2: Learning The Basics
Chapter 2 Learning the Basics This chapter gives some computing tips and provides important information about basic features. Computing tips Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the disk. If the network you are using goes down and you must restart your computer to reconnect, or your battery runs out of charge while you are working, you will lose all work since you last saved.
Page 84 Learning the Basics Computing tips Back up your files to disks (or other removable media) on a regular basis. Label the backup copies clearly and store them in a safe place. It is easy to put off backing up because it takes time. However, if your hard disk suddenly fails, you will lose all the data on it unless you have a separate backup copy.
Page 85: Using The Keyboard
Using the keyboard Your computer’s keyboard contains character keys, control keys, function keys, and special Windows the functionality of a full-size keyboard. Sample keyboard Character keys Typing with the character keys is very much like typing on a typewriter, except that: The space bar creates a space character instead of just passing over an area of the page.
Page 86: Function Keys
Used in combination with the specific functions on the computer. For example, off the Dual Mode Pad. For more information, see “TOSHIBA Hotkey Utility” on page page 225. Windows special keys Sample Windows special keys Your computer’s keyboard has two keys that have special...
Page 87: Starting A Program
Starting a program The easiest way to start a program is to double-click the name of the file that contains the information you want to work on. To find the file, use My Computer or Windows If you prefer to open the program first, you have four options. You can: Double-click the icon for the program on your desktop Use the Start menu...
Page 88: Starting A Program From Windows Explorer
Learning the Basics Starting a program If a program is not listed in the All Programs menu, you can start it from Windows gives you a view of your computer’s contents as a hierarchy or “tree.” You can easily see the content of each drive and folder on your computer.
Page 89: Starting A Program From The Run Dialog Box
Windows Files folder on the right side of the window. The left side of the window shows all the folders contained within the Program Files folder. In the left part of the window, click Windows NT. Click Accessories. Windows Accessories folder on the right side of the window. In the right part of the window, double-click WordPad.
Page 90: Saving Your Work
Learning the Basics Saving your work If you do not know the program’s location, you can search for it by clicking Start, and then Search. When the Search screen displays, follow the displayed instructions. Type WordPad in the Open text box and press HINT: To run the same program again, click the arrow to the right of the text box and select the command line from the drop-down list.
Page 91 Use this dialog box to specify where to store the document and to give it a file name. Sample Save As dialog box Choose the drive and folder where you want your file to be stored. Type a file name, then click Save. HINT: To make another copy of the file you are currently working with, choose Save As from the File menu and give the new file a different name.
Page 92: Printing Your Work
Learning the Basics Printing your work Using a file extension Most programs assign an extension to the file name that identifies the file as being created in the program with a particular format. For example, Microsoft Word saves files with a .doc extension. Any file name with an extension of “.doc”...
Page 93: Backing Up Your Work
The program displays a Print dialog box. Sample Print dialog box Specify the print parameters. For example, the range of pages and number of copies to print. Click Print. Backing up your work Back up all the files you create in case something happens to your computer.
Page 94: Restoring Your Work
Learning the Basics Using the CD-RW/DVD-ROM or multi-function drive Restoring your work To restore information from your backup media to your hard disk, use the Restore page in the backup program. Look in the online Help or your operating system documentation for information on restoring files.
Page 95: Cd-Rw/Dvd-Rom Or Multi-Function Drive Components
Using the CD-RW/DVD-ROM or multi-function drive For optimum DVD performance, it is recommended that you NOTE play DVDs while running the computer on AC power. CD-RW/DVD-ROM or multi-function drive components The CD-RW/DVD-ROM or multi-function drive is located on the right side of the computer. Your CD-RW/DVD-ROM or multi-function drive may look like this: Drive in-use indicator light...
Page 96: Media Control Buttons
Learning the Basics Using the CD-RW/DVD-ROM or multi-function drive Manual eject hole—Use if you need to release the disc tray when the power is off. Use a straightened paper clip or other narrow object to press the manual eject button located inside the hole.
Page 97: Inserting A Compact Disc
Using the CD-RW/DVD-ROM or multi-function drive Power is off or the computer is in Hibernation mode and you press the CD/DVD button Operating system is running or the computer is in Standby mode and you press the CD/DVD button The play/pause button starts playing the disc or makes it pause if currently playing.
Page 98 Learning the Basics Using the CD-RW/DVD-ROM or multi-function drive Grasp the tray and pull it fully open. Sample drive tray fully extended Hold the disc by its edges and check that it is free of dust. If the disc is dusty, clean it as described in CD or DVD Discs”...
Page 99: Playing An Audio Cd
If you insert the disc incorrectly, it may jam the drive. If this happens, contact Toshiba support for assistance. Push the disc tray in by pressing gently on the center of the tray until it clicks into place.
Page 100 Learning the Basics Using the CD-RW/DVD-ROM or multi-function drive Stop button Play/pause button Sample Windows Media Player screen The Windows Media Player control panel works much like an ordinary compact disc player: To play the CD or to pause, click the Play/pause button. To stop the CD, click the Stop button.
Page 101: Playing Cds Using Auto-Run
Using the CD-RW/DVD-ROM or multi-function drive Playing CDs using Auto-Run If you insert a CD into the CD-RW/DVD-ROM or multi- function drive and the Auto-Run feature does not automatically start your disc, try launching the CD manually. To do this, follow these steps: Open the Start menu and select My Computer.
Page 102: Removing A Disc With The Computer On
PCs or optical media players. These problems are not due to any defect in your Toshiba PC or optical drive. Please refer to your PC's product specification for listing of specific format compatibilities.
Page 103: Removing A Disc With The Computer Off
Using the CD-RW/DVD-ROM or multi-function drive Gently push the tray in to close it. Removing a disc with the computer off Insert a slender object, such as a straightened paper clip, into the manual eject hole. The disc tray slides partially out of the drive (about 1 inch).
Page 104: Toshiba's Online Resources
Let the disc dry completely before inserting it in the drive. Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions and keep you up to date with future upgrades.
Page 105: Chapter 3: Mobile Computing
Many of these energy-saving features have been set by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you can use it for longer periods while traveling.
Page 106: Battery Notice
Published battery life numbers are achieved on select models and configurations tested by Toshiba at the time of publication. Recharge time varies depending on usage. Battery may not charge while the computer is consuming full power.
Page 107: Power Management
Users who are not completely familiar with the power management component of the system should use the preset configuration. For assistance with setup changes, contact Toshiba’s Global Support Centre. Using additional batteries In addition to the main battery, you may also have an optional second battery (not included with your computer).
Page 108: Charging Batteries
Doing so may reduce the potential charge of the battery. Use only battery chargers designed to work with your notebook computer. You can order a Toshiba battery charger from Toshiba’s Web site at accessories.toshiba.com. Battery charge time may vary depending on the applications, NOTE power management settings, and features used.
Page 109: Charging The Rtc Battery
The main battery may not start charging immediately under the following conditions: The battery is extremely hot or cold. To ensure that the battery charges to its full capacity, wait until it reaches room temperature (50 to 80 degrees Fahrenheit, 10 to 26 degrees Celsius).
Page 110: Monitoring Main Battery Power
Mobile Computing Monitoring main battery power The above error message may vary by computer model. NOTE The RTC battery does not charge while the computer is turned off even when the AC adapter is charging the computer. The RTC battery charges when the computer is powered on.
Page 111 Is unlit when the battery has discharged, the battery is not charging, or the AC adapter is not plugged into the computer or AC outlet. Battery life and charge time may vary, depending upon power NOTE management settings, applications and features used. Flashes amber when the main battery charge is low and it is time to recharge the main battery or plug in the AC adapter.
Page 112: Determining Remaining Main Battery Power
Mobile Computing Monitoring main battery power Power button Sample power and main battery light locations Determining remaining main battery power Wait at least 16 seconds after turning on the computer before NOTE trying to monitor the remaining battery power. The computer needs this time to check the battery’s remaining capacity and perform its calculations.
Page 113 The current power source and battery power remaining section displays the current charge state of the battery. The value displays as a percentage of remaining battery charge. Sample Power Meter tab of Power Options Properties TECHNICAL NOTE: The computer drains the battery faster at low temperatures.
Page 114: What To Do When The Main Battery Runs Low
Mobile Computing Monitoring main battery power What to do when the main battery runs low When the main battery runs low you can Plug the computer into an external power source and recharge the main battery Place the computer into Hibernation mode and replace the main battery with a charged spare Connect the computer to an optional high capacity battery (if available for your computer)
Page 115: Conserving Battery Power
To set an alarm: Click Start, Control Panel. Double-click the Power Options icon. The Power Options Properties window appears. Click the Alarms tab and set the alarm as desired. Sample Alarms tab in Power Options Properties Conserving battery power How long a fully charged battery pack lasts when you are using the computer depends on a number of factors, such as: How the computer is configured How much you use the hard disk, CD-RW/DVD-ROM or...
Page 116: Power Schemes
Mobile Computing Monitoring main battery power Where you are working, since operating time decreases at low temperatures There are various ways in which you can conserve power and extend the operating time of your battery: Enable Standby or Hibernation, which saves power when you turn off the computer and turn it back on again Use the power schemes in the Power Options Properties These power-saving options control the way in which the...
Page 117: Using A Hot Key To Set The Power Scheme
Click the Power Schemes tab and select a power scheme. Sample Power Schemes tab in Power Options Properties You can configure your computer’s power usage using the drop down lists. You can choose one of the provided power schemes or select your own custom settings. For more information, see your Windows documentation.
Page 118: Changing The Main Battery
Mobile Computing Changing the main battery You can configure your computer’s power usage using the drop down lists. You can choose one of the provided power schemes or select your own custom settings. For more information, see your Windows documentation. Changing the main battery Never short circuit the battery pack by either accidentally or intentionally bringing the battery terminals in contact with...
Page 119: Removing The Battery From The Computer
Removing the battery from the computer To remove the battery: Save your work. Power off the computer or place it in Hibernation mode according to the instructions in page Unplug and remove any cables connected to the computer, including the AC adapter. Close the display panel and turn the computer upside down with the front of the computer facing you.
Page 120: Inserting A Charged Battery
Mobile Computing Changing the main battery Slide the battery release latch to release the battery. Pull the discharged battery out of the computer. Sample removing the battery If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately.
Page 121 Insert the charged battery into the slot until the latch clicks. The battery pack has been designed so that you cannot install it with reverse polarity. If the battery does not slide into the slot easily, move the battery release lock to the unlocked position and try again. Do not force the battery into position.
Page 122: Taking Care Of Your Battery
If a battery is leaking or damaged, replace it immediately. Use protective gloves when handling a damaged battery. To replace the main battery, use an identical battery that you can purchase through the Toshiba Web site at accessories.toshiba.com. A reverse polarity condition should be avoided with all batteries.
Page 123: Maximizing Battery Life
Do not expose the battery pack to fire. The battery pack could explode. Maximizing battery life To maximize the life of your battery pack: At least once a month, disconnect the computer from a power source and operate it on battery power until the battery pack fully discharges.
Page 124: Disposing Of Used Batteries
Mobile Computing Disposing of used batteries If you are not going to use the computer for more than eight hours, disconnect the AC adapter. Store spare battery packs in a cool dry place out of direct sunlight. Disposing of used batteries The life of a battery pack depends on usage.
Page 125: Traveling Tips
Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cords, and compact discs. Contact your authorized Toshiba representative for more information.
Page 126: Chapter 4: Exploring Your Computer's Features
Chapter 4 Exploring Your Computer’s Features In this chapter, you will explore some of the special features of your notebook computer. Exploring the desktop The desktop is the launching pad for everything you can do in the Windows start programs, find documents, set up system components, and perform most other computing tasks.
Page 127: Finding Your Way Around The Desktop
Exploring Your Computer’s Features Exploring the desktop Finding your way around the desktop Your computer’s desktop includes several standard features: icons, Start button, taskbar, system tray, and background pattern. Icons Taskbar System tray Start button ® Sample Windows XP operating system desktop Icons An icon represents a folder, file, or program that can be quickly activated by double-clicking the icon.
Page 128 Exploring Your Computer’s Features Exploring the desktop TECHNICAL NOTE: If you delete a file from a diskette, it does not go into the Recycle Bin. For more information on the Recycle Bin, see Windows online Help. Internet Explorer — The Microsoft access to the Internet.
Page 129: Setting Up For Communications
Taskbar Each time you open a program, a button associated with that program appears on the taskbar. With some programs, a button appears on the taskbar for each document or window you open. You can use these buttons to quickly switch between the programs or windows.
Page 130 Exploring Your Computer’s Features Setting up for communications Determining the COM port Your modem is connected to one of the computer’s COM (communications) ports. The default setting for the modem is COM3. The following procedure is intended to support you if you need to either upgrade your modem or reset the port to the default settings.
Page 131: Connecting The Modem To A Telephone Line
Click OK to close the properties dialog box for that specific modem. Click OK to close the Modem Properties dialog box. Close the Control Panel. Connecting the modem to a telephone line Before you can communicate using the modem, you need to connect it to a telephone line.
Page 132: Connecting Your Computer To A Network
Now you are ready to send a fax or use the modem to connect to an online service or the Internet. For more detailed information regarding your computer’s modem, visit Toshiba’s Web site at accessories.toshiba.com. Connecting your computer to a network You can connect your computer to a network to increase its capabilities and functionality using one of its communication ports.
Page 133 Exploring Your Computer’s Features Using the Ethernet LAN Port When your computer starts, Windows attempts to contact a Dynamic Host Configuration Protocol (DHCP) server. If the computer is not connected to a network, it may pause a few minutes as it waits for a reply. To avoid this delay, you can reconfigure Windows to disable the LAN port.
Page 134: An Overview Of Using The Internet
Exploring Your Computer’s Features An overview of using the Internet Using Wireless LAN Connectivity Wireless connectivity and some features may require you to NOTE purchase additional software, external hardware or services. Availability of public wireless LAN access points may be limited.
Page 135: The Internet
Surfing the Internet Internet features Uploading to, and downloading files from, the Internet The Internet The Internet is an association of thousands of networks and millions of computers around the world connected by communications lines. They all work together to share information.
Page 136: Connecting To The Internet
Exploring Your Computer’s Features An overview of using the Internet Connecting to the Internet To connect to the Internet, you need: A modem and telephone line, or a LAN connection A Web browser An Internet Service Provider (ISP) account The Microsoft automatically configured on your system so that when you first start it, it guides you through signing up for a new ISP account, or assists you in setting up your computer to work...
Page 137: Internet Features
You can also use a Search Engine, a Web site specifically designed to help you look for information. Internet features The Internet offers many types of communication tools to help you perform many tasks. Internet email To send and receive email of your own, you need a mailbox on the Web or an email address.
Page 138: Uploading To, And Downloading Files From, The Internet
Exploring Your Computer’s Features Exploring audio features Uploading to, and downloading files from, the Internet Transferring files from one computer to another is termed uploading (transferring data from your computer to a site on the Web), or downloading (transferring data from a site on the Web to your computer).
Page 139 Using a microphone Connect an external microphone to the computer. Click Start, All Programs, Accessories, Entertainment, and then Sound Recorder. Positioning Sample Sound Recorder screen Click the Record button. Speak normally into the microphone. When you have finished recording, click the Stop button. The Sound Recorder window displays the new sound file as a waveform.
Page 140: Using External Speakers Or Headphones
Exploring Your Computer’s Features Exploring audio features Using external speakers or headphones Your computer is equipped with a full stereo sound system with internal speakers. Instead of using the internal speakers, you can connect an external audio device to one of the jacks on the front of the computer.
Page 141: Using The I.link ® Port
To play back sound files through external speakers or headphones: Locate the headphone or audio out jack on the front of the computer. Using any necessary adapters, plug the cable from the headphones or external speakers into the jack. The headphone jack requires a 16-ohm stereo mini-jack. To adjust the volume: For external speakers, use the volume controls on each speaker.
Page 142: Inserting A Pc Card
Exploring Your Computer’s Features Using PC Cards TECHNICAL NOTE: For PCMCIA-compatible PC Cards, check the package to make sure they conform to the PCMCIA 2.1 standard (or later). Other cards may work with your computer, but are likely to be much more difficult to set up and use. Inserting a PC Card Before you insert a PC Card, refer to the documentation that comes with the card to see if you need to do anything before...
Page 143: Removing A Pc Card
Removing a PC Card Prepare the card for removal by right-clicking on the Safely Remove Hardware icon on the system tray and then selecting the card or device you want to remove. If the system is unable to prepare the card for safe removal, a message will tell you to try again later.
Page 144: Using An Expresscard
Exploring Your Computer’s Features Using an ExpressCard™ Using an ExpressCard™ The ExpressCard slot supports the use of ExpressCard media. The slot also supports hot swapping, which allows you to replace one ExpressCard with another while the computer is Inserting an ExpressCard Before you insert an ExpressCard, refer to the documentation that comes with the card to see if you need to do anything before you insert it.
Page 145: Removing An Expresscard
Removing an ExpressCard Prepare the card for removal by right-clicking on the Safely Remove Hardware icon on the system tray and then selecting the card or device you want to remove. If the system is unable to prepare the card for safe removal, a message will tell you to try again later.
Page 146: Using The Bridge Media Adapter Slot
Exploring Your Computer’s Features Using the Bridge Media Adapter Slot Using the Bridge Media Adapter Slot The Bridge Media Adapter Slot supports the use of Memory Stick or Memory Stick ) Cards, MMC (MultiMedia Card), or xD-Picture Cards. This media can be used with a variety of digital products: digital music players, cellular phones, PDAs, digital cameras, digital video camcorders, etc.
Page 147: Removing Memory Media
Removing memory media Prepare the media for removal by right-clicking on the Safely Remove Hardware icon on the system tray and then selecting the card or device you want to remove. If the system is unable to prepare the media for safe removal, a message will tell you to try again later.
Page 148: Chapter 5: Toshiba Utilities
Together, these allow you to determine certain system details, set additional options, or change default options. This chapter describes the utilities supplied by Toshiba: TOSHIBA Assist Supervisor password User password...
Page 149: Toshiba Assist
The TOSHIBA Assist provides quick access to computer functions and allows you to customize a range of computer settings. To access TOSHIBA Assist, do one of the following: Double-click the TOSHIBA Assist shortcut icon on the desktop. Click Start, All Programs, Toshiba, Utilities, then click Toshiba Assist.
Page 150: Connect
The features available in this category are: ConfigFree™ ConfigFree Bluetooth Bluetooth Local COM Settings (available on some models) Sample TOSHIBA Assist – Connect tab Secure The features available in this category are: User password Supervisor password TOSHIBA Password Utility Connectivity Doctor Settings (available on some models) ®...
Page 151: Protect & Fix
Toshiba Utilities TOSHIBA Assist Sample TOSHIBA Assist window – Secure tab Protect & Fix The feature available in this category is: PC Diagnostic Tool Utility Sample TOSHIBA Assist window – Protect & Fix tab...
Page 152: Optimize
TOSHIBA Assist Optimize The features available in this category are: TOSHIBA SD™ Memory Card Format Utility Mouse Utility TOSHIBA Accessibility TOSHIBA Zooming Utility TOSHIBA Button Controls CD/DVD Drive Acoustic Silencer TOSHIBA Hardware Setup Sample TOSHIBA Assist window – Optimize tab...
Page 153: Toshiba Sd Memory Card Format Utility
This utility is used to format SD cards used with the Bridge Media Adapter Slot. To format an SD memory card using this utility: Click Start, All Programs, Toshiba, Utilities, SD Memory Card Format utility, or double-click the SD Memory Card icon in the Optimize tab of TOSHIBA Assist.
Page 154: Setting Passwords
When you set a password, you must enter the password before you can work on your computer again. Toshiba supports several types of passwords on your computer: An instant password—Secures your open programs and files when leaving the computer temporarily (the user password supports this function).
Page 155: Using A Supervisor Or User Password
Toshiba is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access the computer.
Page 156 Type the correct password. Click OK. Setting a user password If you choose to set a user password, Toshiba strongly recommends that you save your password in a location where you can later access it should you not remember Toshiba is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access the computer.
Page 157: Toshiba Password Utility
Select the User Password icon. Select Not Registered. Type the correct password. Click OK. TOSHIBA Password Utility The TOSHIBA Password Utility allows you to set a user- level password in TOSHIBA Assist or in System Setup. To use the TOSHIBA Password utility: Start TOSHIBA...
Page 158 Toshiba Utilities TOSHIBA Password Utility Click the Secure tab, then double-click the User Password icon. The TOSHIBA Password Utility window appears. Sample TOSHIBA Password Utility window Click Set Enter a password, then enter it again to verify. Click Set Click OK if you want to save the password to a text file on a diskette or media of your choice.
Page 159: Pc Diagnostic Tool Utility
If you choose to set a supervisor or user password, Toshiba strongly recommends that you save your password in a location where you can later access it should you not remember it. Toshiba is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access your computer.
Page 160: Toshiba Hotkey Utility
Click Start Diagnostics when you are ready to begin the tests. TOSHIBA Hotkey Utility The TOSHIBA Hotkey utility allows you to receive a confirmation message when you use the Hotkey combination for Standby [ To activate the Hotkey utility:...
Page 161: Mouse Utility
Pointer options Wheel Hardware You may see additional categories depending on your particular pointing device. For information on these settings, “Using the Dual Mode Pad” on page Adjust the settings as desired, then click OK. Toshiba Utilities Mouse Utility TOSHIBA Assist.
Page 162: Toshiba Hardware Setup
TOSHIBA Hardware Settings icon in the Optimize tab of The TOSHIBA HW Setup screen appears. Sample TOSHIBA HW Setup screen – Password tab options The TOSHIBA HW Setup screen has the following tabs: General—Allows you to view the current BIOS version or change certain settings back to their default values.
Page 163 By changing any of the options that appear in the dialog boxes and clicking Apply, you can reconfigure that function. Any options that you change will become default settings when you restart your system. Toshiba Utilities TOSHIBA Hardware Setup function key and access the...
Page 164: Toshiba Zooming Utility
® Adobe Icons on the desktop To access the Zooming utility: Click Start, All Programs, Toshiba, Utilities, TOSHIBA Zooming Utility, or double-click the Zooming Utility icon in the Optimize tab of The TOSHIBA Zooming Utility Properties screen appears. Sample TOSHIBA Zooming Utility Properties screen 232).
Page 165: Toshiba Button Controls
The zoom in and zoom out hot keys will now work with the applications you selected. To zoom in, hold down the hold down the For more information about how to use the TOSHIBA Zooming utility, right click the then click Help. TOSHIBA Button Controls The TOSHIBA Button Controls allow you to customize the TOSHIBA Assist and TOSHIBA Presentation buttons.
Page 166: Cd/Dvd Drive Acoustic Silencer
Toshiba Utilities CD/DVD Drive Acoustic Silencer Select the button whose function is to be customized. Make the desired selections. Click Apply, then click OK. CD/DVD Drive Acoustic Silencer This utility can slow the speed of your optical drive to make it run more quietly.
Page 167: Toshiba Accessibility
Click Set Normal Mode to run the drive at normal speed, for transferring data. TOSHIBA Accessibility The TOSHIBA Accessibility utility allows you to use the key to create a hot key combination with one of the function keys without pressing the two keys simultaneously as is usually required.
Page 168: Fingerprint Authentication Utility
Toshiba does not guarantee that the fingerprint utility will accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of the fingerprint software or utility.
Page 169 Problem with operation. The sensor could not read your fingerprint. Swipe your finger again. Operation succeeded. The sensor successfully read or verified your fingerprint. Failed to verify the user. The fingerprint could not be matched. Toshiba Utilities Fingerprint Authentication Utility...
Page 170: Fingerprint Logon
Toshiba Utilities Fingerprint Authentication Utility Error reading fingerprint—the finger was too far to the left or right. Center your finger and swipe it again. Error reading fingerprint—the movement was skewed. Swipe your finger again in a straight line. Error reading fingerprint—the movement was too fast.
Page 171 Open the Control Center and go to Settings - System Settings. Select Logon. Check the Allow power-on security single sign-on check box. (Logon support must be enabled for this option to be accessible.) Toshiba Utilities Fingerprint Authentication Utility ® logon password.
Page 172: Control Center
Toshiba Utilities Fingerprint Authentication Utility Fingerprint Management Fingerprints are stored in memory during enrollment. After a finger is enrolled, it is displayed with a power-on button above it. The button appears “pressed in” by default, indicating that the corresponding finger will be used for power-on security.
Page 173 Help icon—Displays this help. The help files in other languages (depending on your installation) are located in the mui subfolder of your installation folder. About icon—Displays version information. Toshiba Utilities...
Page 174: Password Bank
Toshiba Utilities Fingerprint Authentication Utility Password Bank The Password Bank stores registration and logon information for Web sites and dialogs, helping to automate the task of entering this information. You enter the required information only once, during Web page or dialog registration. When the window is displayed again, all the data is entered automatically when you scan your fingerprint on the sensor.
Page 175 If you directly access a registered page from your browser without using the Biomenu’s Registered Sites option, Password Bank displays a hint that the page is registered and can be replayed. These hints can be turned off in the Password bank tab of the User Settings dialog. Toshiba Utilities...
Page 176 Toshiba Utilities Fingerprint Authentication Utility Replaying registrations with multiple forms Password Bank registers forms, not pages. If a page contains several forms, each form requires a separate registration. If a page contains several forms, replaying works as follows: If only one form is registered for the page (regardless of how many forms the page has), that registration is replayed.
Page 177 Select a registration. Click Delete. How to Delete the Fingerprint Data Fingerprint data is stored in the non-volatile memory. If the computer changes ownership, Toshiba recommends the following procedure: Click Start, All Programs, Protector Suite QL then click Control Center.
Page 178: Care And Maintenance Of Your Fingerprint Sensor
Toshiba Utilities Fingerprint Authentication Utility If other fingerprint data is still displayed on the list, hold down the are all selected, then click Remove. Click OK to make the changes permanent. Check that all Fingerprint data was deleted on the Fingerprint Storage Inspector screen.
Page 179 The fingerprint for each finger is different and unique. Please ensure that only the registered or enrolled fingerprint or fingerprints are used for identification. Check sliding position (see illustration below). Sample aligning the finger on the sensor Toshiba Utilities...
Page 180: Fingerprint Sensor Limitations
Toshiba does not guarantee that the fingerprint sensor will recognize the enrolled user or accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of this fingerprint recognition software or utility.
Page 181: Chapter 6: If Something Goes Wrong
This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter. Problems that are easy to fix Your program stops responding.
Page 182 If Something Goes Wrong Problems that are easy to fix Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. Select the program you want to close, then click End Task.
Page 183: Problems When You Turn On The Computer
To record the details: Click the Details button and select the text the operating system displays. The Details button displays information that the software manufacturer needs to help you solve your problem. Press Ctrl clipboard. Open Notepad (click Start, All Programs, Accessories and then click Notepad).
Page 184 If Something Goes Wrong Problems when you turn on the computer The computer starts but when you press a key nothing happens. Verify that the active program accepts text input. Try clicking your mouse on an area where you can type text and try typing again.
Page 185: The Windows Operating System Is Not Working
The Windows® operating system is not working If you are running on battery power, it is recommended that you do not leave the computer in Standby mode for long periods of time. To charge the battery, leave the computer plugged into a live wall outlet for several hours.
Page 186: Using Startup Options To Fix Problems
If Something Goes Wrong The Windows® operating system is not working Using Startup options to fix problems If the operating system fails to start properly, you may have to change your system’s configuration or verify the startup procedure to fix the problem. To do this, use the options in the Startup menu.
Page 187: Internet Problems
The Windows® operating system is not working Internet problems My Internet connection is very slow. Many factors contribute to the speed with which you can surf the Internet. They include: modem speed, telephone line conditions, time of day (when everyone else is surfing, your access can be slow) and popularity of the sites you are trying to access.
Page 188: Resolving A Hardware Conflict
If Something Goes Wrong Resolving a hardware conflict You can connect to Support Online by clicking Support from the menu or by going to pcsupport.toshiba.com. Resolving a hardware conflict If you receive an error message telling you there is a device driver conflict or a general hardware problem, try using ®...
Page 189: Resolving Hardware Conflicts On Your Own
If Something Goes Wrong Resolving a hardware conflict Resolving hardware conflicts on your own Computer components need resources to accomplish a task. A device, such as a disk drive or a modem, needs a channel to the computer’s Central Processing Unit (CPU). It also needs a direct channel to the computer’s memory to store information as it works.
Page 190: Fixing A Problem With Device Manager
If Something Goes Wrong Resolving a hardware conflict If you install an older (legacy) device that the operating system cannot recognize, the operating system may have difficulty assigning resources to it. As a result, a hardware conflict can occur. Resolving conflicts There are several things you can do to resolve hardware conflicts: Get the most recent drivers from the manufacturer.
Page 191 Disabling a device Click Start, Control Panel, then click Performance and Maintenance. Click the Administrative Tools icon. Double-click Computer Management, then click Device Manager. Select the specific device from the device category. To expand a device category, double-click the category. In the toolbar, look to the far right for an icon of a monitor with a strike mark through a circle on the front.
Page 192: Memory Problems
If Something Goes Wrong Resolving a hardware conflict The operating system displays the Device Properties dialog box, which provides an array of tabs. They may include: The General tab, which provides basic information about the device. The Resource tab, which lists resources assigned to the monitor, optional external DVD-ROM, optional external diskette drive, and other power-using functions.
Page 193: Power And The Batteries
Check for the error again. If the error recurs, remove the memory module entirely and check for the error again. If removing the memory module eliminates the error, the memory module may be faulty. If the error recurs without the memory module installed, the error is not caused by the memory module.
Page 194 If Something Goes Wrong Resolving a hardware conflict The AC adapter and power cord/cable work correctly, but the battery will not charge. The battery does not charge while the computer is consuming full power. Try turning off the computer. The battery may not be inserted correctly in the computer. Turn off the computer, remove the battery, clean the contacts with a soft dry cloth (if necessary) and replace the battery.
Page 195: Keyboard Problems
This is normal for all batteries. To purchase a new battery pack, see your accessories information that shipped with your computer, or visit the Toshiba Web site at accessories.toshiba.com. current on the most recent software and hardware options for your computer, and for other product information.
Page 196: Display Problems
If Something Goes Wrong Resolving a hardware conflict Nothing happens when you press the keys on the external keyboard. You may have plugged the external keyboard in while the computer was turned on. Click Start, Shut Down or Turn off computer, and Restart the computer using the Dual Mode Pad on the internal keyboard.
Page 197 Try adjusting the contrast and brightness controls on the external monitor. Press priority is not set for the built-in screen. The screen does not look right. You can change the display settings by clicking a blank area of the desktop with the secondary control button, then clicking Properties.
Page 198: Disk Drive Problems
If Something Goes Wrong Resolving a hardware conflict Click OK. The display mode is set to Simultaneous and the external display device does not work. Make sure the external monitor is capable of displaying at resolutions of 800 x 600 or higher. Devices that do not support this resolution will only work in Internal/External mode, and not simultaneous mode.
Page 199 Error-checking Run Error-checking, which analyzes the directories, files and File Allocation Table (FAT) on the disk and repairs any damage it finds: To run Error-checking: Click Start, then click My Computer. Right-click the drive you want to check. On the pop-up menu, click Properties. The drive’s Properties box appears.
Page 200 If Something Goes Wrong Resolving a hardware conflict Your data files are damaged or corrupted. Refer to your software documentation for file recovery procedures. Many software packages automatically create backup files. You may also be able to recover lost data using utility software.
Page 201: Cd-Rw/Dvd-Rom Or Multi-Function Drive Problems
CD-RW/DVD-ROM or multi-function drive problems You cannot access a disc in the drive. If the CD-RW/DVD-ROM or multi-function drive is an external drive, make sure that the drive’s cable is properly connected to the computer. Make sure the tray which holds the CD-ROM or DVD-ROM is closed properly.
Page 202: Sound System Problems
If Something Goes Wrong Resolving a hardware conflict Some discs run correctly but others do not. Check the type of disc you are using. The CD-RW/ DVD-ROM or multi-function drive supports the Digital Versatile Disc (DVD) formats DVD-ROM, DVD-R (read- only), plus CD-ROM, CD-R (read-only), and CD-RW (read- only).
Page 203: Pc Card Problems
If Something Goes Wrong Resolving a hardware conflict PC Card problems PC Cards (PCMCIA-compatible) include many types of devices, such as a removable hard disk, additional memory, or a pager. Most PC Card problems occur during installation and setup of new cards. If you are having trouble getting one or more of these devices to work together, several sections in this chapter may apply.
Page 204 If Something Goes Wrong Resolving a hardware conflict PC Card checklist Make sure the card is inserted properly into the slot. Make sure all cables are securely connected. Occasionally a defective PC Card slips through quality control. If another PCMCIA-equipped computer is available, try the card in that machine.
Page 205 The computer stops working (hangs) when you insert a PC Card. The problem may be caused by an I/O (input/output) conflict between the PCMCIA socket and another device in the system. Use Device Manager to make sure each device has its own I/O base address.
Page 206: Printer Problems
If Something Goes Wrong Resolving a hardware conflict A PC Card error occurs. Reinsert the card to make sure it is properly connected. If the card is attached to an external device, check that the connection is secure. Refer to the card’s documentation, which should contain a troubleshooting section.
Page 207: Modem Problems
The other system may be busy or off line. Try making a test transmission to someone else. For more information regarding your system's V.92 modem, visit the Toshiba Web site at If Something Goes Wrong Resolving a hardware conflict 130.
Page 208: Wireless Networking Problems
To determine if your computer has an internal Wi-Fi adapter, NOTE check the device list in Device Manager (part of the Windows Control Panel). Some Toshiba models may have a Wi-Fi antenna switch even though they do not have an internal Wi-Fi adapter.
Page 209 Resolving a hardware conflict Check Control Panel's Device Manager to verify that the Wi-Fi adapter is recognized by Windows driver is loaded. Carefully note any error messages— these will be very helpful if you should confer with a support technician at a later time. Verify that the network connection is configured to obtain its Internet Protocol (IP) address dynamically: Click Start, Control Panel.
Page 210 If Something Goes Wrong Resolving a hardware conflict Use the PING command to verify a connection to the gateway at 192.168.1.1 (a default gateway for most wireless routers). Click Start, then click Run... Enter Cmd and press Enter. Enter PING 192.168.1.1 at the command prompt, and press Enter.
Page 211: Dvd Operating Problems
The Windows XP wireless management facility does not work. If you are using an external Wi-Fi adapter (a PC Card, USB adapter, or other variety), check if the adapter comes with its own management utility. If it does, the utility may be disabling the Windows XP wireless management facility, in which case you must use the adapter's management utility.
Page 212 “Checking device properties” on page 191 instructions on using Device Manager to view the DVD- ROM properties. Check the Toshiba Web site for new information on DVD-ROM drives and their operation. A blank screen appears while watching a DVD-ROM movie or title.
Page 213 Click OK. DVD titles, games, or applications appear distorted. Having Stretch enabled when your video resolution is set to 640 x 480 or 800 x 600 can cause distortion. To disable Stretch, follow the instructions below: Right-click the Desktop, select Properties. Select the Settings tab.
Page 214: Develop Good Computing Habits
If Something Goes Wrong Develop good computing habits Develop good computing habits Save your work frequently. You can never predict when your computer will lock, forcing you to close a program and lose unsaved changes. Many software programs build in an automatic backup, but you should not rely solely on this feature.
Page 215: Data And System Configuration Backup In Windows Xp
Your local computer store or book store sells a variety of self- help books you can use to supplement the information in the manuals. Data and system configuration backup in Windows XP Windows XP offers some easy-to-use features for backing up your Windows settings and your data –...
Page 216 If Something Goes Wrong Develop good computing habits Windows creates the Restore Point and automatically stamps it with the current date and time. Then, at a later time, you can re-establish your Windows configuration using the saved Restore Point. To do this: Click Start.
Page 217 CDs, a relatively high-capacity storage media. No additional software is required. Most of the CD and DVD drives built into recent Toshiba portable computer models can write to (or ‘burn’) as well as read from CDs.
Page 218 If Something Goes Wrong Develop good computing habits NOTE Documents and other data files that you create as you work are typically stored in the My Documents folder. You may also wish to back up other important data files stored elsewhere on your hard disk drive, for example: When you have finished copying files to the CD window, click File, Write these files to CD.
Page 219 Favorites (bookmarks) for Internet Explorer and other Web browsers Follow these steps to back up your Favorites for Internet Explorer (ver 5.0 or newer): In Internet Explorer, click File, Import and Export. The Import/Export Wizard will appear. Click Next. Click Export Favorites, Next. (To restore the Favorites to the hard disk drive later you would select Import Favorites from this list.) A list of your Favorites folders will appear, with the top-...
Page 220 If Something Goes Wrong Develop good computing habits General tips for installing hardware and software Here are a few tips to help insure safe and easy installation of new hardware (printers, pointing devices, external hard drives, DVD writers, scanners, etc.) and software (applications like Microsoft Office or utility software such as special toolbars for your Web browser).
Page 221: If You Need Further Assistance
Since some problems may be related to the operating system or the program you are using, it is important to investigate other sources of assistance first. Try the following before you contact Toshiba: Review the troubleshooting information in your operating system documentation.
Page 222: Contacting Toshiba
GO, and then clicking the Detailed Specs link from the menu on the left, or just refer to the computer documentation shipped with your product. For the number of a Toshiba dealer near you in the United States, call: (800) 457-7777. Contacting Toshiba...
Page 223: Other Toshiba Internet Web Sites
For technical support, call the Toshiba Global Support Centre: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Other Toshiba Internet Web sites toshiba.com computers.toshiba.com accessories.toshiba.com www.toshiba.ca www.toshiba-Europe.com www.toshiba.co.jp/index.htm http://servicio.toshiba.com Toshiba’s worldwide offices Australia Toshiba (Australia) Pty. Limited...
Page 224 Henares Spain United States Toshiba America Information Systems, Inc. 9740 Irvine Boulevard Irvine, California 92618 United States For more information on additional Toshiba worldwide locations, please visit: www.toshiba.co.jp/index.htm. Japan Toshiba Corporation, PCO-IO 1-1, Shibaura 1-Chome Minato-Ku, Tokyo, 105-8001 Japan Mexico Toshiba de México S.A.
Page 225: Appendix A: Hot Keys
Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the key, turn system functions on and off. Hot keys have a legend on the key indicating the option or feature the key controls. Volume Mute This hot key enables/disables volume mute on your computer.
Page 226: Password Security
Hot Keys Password security Password security This hot key blanks the display. Without a password The Fn + F1 key combination turns off the display and activates instant security. Using the pointing device or any key will make the display’s content reappear, if no password is set for the current user.
Page 227: Maintaining Security When The Battery Is Not Fully Charged
If you clicked Choose a screen saver, the Screen Saver tab has already been selected. If it is not selected, click the Screen Saver tab. Click the On resume, password protected check box. Click OK. Maintaining security when the battery is not fully charged When the battery is not fully charged (even if the computer is operating on AC power) your display may reappear automatically after a short time.
Page 228: Power Usage
Hot Keys Power usage Power usage This hot key displays the Power Schemes tab of the Power Options Properties window. Sample Power Schemes tab in Power Options You can configure your computer’s power usage using the drop down lists. You can choose one of the provided power schemes or select your own custom settings.
Page 229: Standby Mode
Standby mode This hot key places the computer into Standby mode. Sample Standby confirmation box A message box displays by default to confirm that the computer is entering Standby mode. You can choose not to display this message box. For more information about Standby mode, please see “Standby mode”...
Page 230: Hibernation Mode
Hot Keys Hibernation mode Hibernation mode This hot key places the computer into Hibernation mode. Sample Hibernation confirmation box If Hibernation mode is enabled (the default) a message box displays by default to confirm the computer is entering Hibernation mode. You can choose not to display this message box.
Page 231: Display Modes
Display modes This hot key cycles through the power-on display options. The display modes are: Sample display options window In order to use a simultaneous mode, you must set the resolution of the internal display panel to match the resolution of the external display device.
Page 232: Display Brightness
This hot key turns the Zooming utility to zoom- out. For more information, see Zooming Utility” on page This hot key turns the Zooming utility to zoom-in. For more information, see Utility” on page “Disabling or enabling the Dual Mode 164. “TOSHIBA Zooming 164. “TOSHIBA...
Page 233: Keyboard Hot Keys
Keyboard hot keys This hot key informs you when the Wireless antenna on-off switch is in the off position. (No message appears when the Wi-Fi antenna on-off switch is in the on position.) This hot key switches screen or video modes. [Spacebar] Hot Keys Keyboard hot keys...
Page 234: Appendix B: Power Cord/Cable Connectors
Appendix B Power Cord/Cable Connectors The computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cord/cable connectors for various parts of the world. USA and Canada UL approved CSA approved Australia AS approved United Kingdom...
Page 235: Appendix C: Using Configfree
Appendix C Using ConfigFree™ with your Toshiba Computer ConfigFree™ is a set of utilities that makes it easy to control communication devices and network connections. ConfigFree also lets you identify communication problems and create profiles for easy switching between locations and communication networks.
Page 236: Getting Started
All Programs, TOSHIBA, Networking, ConfigFree. Double-click the ConfigFree icon Press the TOSHIBA Assist button (if applicable to your system) to open the TOSHIBA Assist, and then click the ConfigFree icon. Click the ConfigFree icon click the desired utility.
Page 237: Configfree Utilities
Using ConfigFree™ with your Toshiba Computer If your computer is not connected to a network, the ConfigFree NOTE icon on the taskbar is displayed with an “X.” When you start a search for wireless devices, ConfigFree Launcher displays on your computer desktop. You can then click the appropriate icon on the Launcher to start the desired ConfigFree utilities.
Page 238: Configfree Utilities
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample ConfigFree Launcher coming back into view ConfigFree Utilities Connectivity Doctor The Connectivity Doctor lets you analyze your network connections and fix network-connection problems. Using Connectivity Doctor, you can view detailed network information by simply moving the mouse pointer.
Page 239 Using ConfigFree™ with your Toshiba Computer Location of wireless communication switch (identified with a yellow arrow) Status of wireless communication switch (on or off) Sample Connectivity Doctor screen Moving the mouse pointer over a wired or wireless network device icon displays information about the device, such as its IP address, subnet mask, and MAC address.
Page 240 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities If a problem or potential problem is detected, in most cases, a screen automatically displays showing you the possible cause and solution for the problem. A triangle containing an exclamation point also appears on the Connectivity Doctor screen and an orange frame describes the relevant location.
Page 241: Search For Wireless Devices
Using ConfigFree™ with your Toshiba Computer Search for Wireless Devices The Search for Wireless Devices utility searches for wireless LAN and Bluetooth devices currently used in the neighborhood, and displays information about them on a virtual map. To search for wireless devices: Click the Click Search for Wireless Devices.
Page 242 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities The Search for Wireless Devices feature identifies if a device is IEEE 802.11a, b, or g. It also includes an option to display hidden access point availability. Sample viewing Wi-Fi devices Creating a new wireless connection...
Page 243 Using ConfigFree™ with your Toshiba Computer Sample dragging a device to the Access Point Sample Wireless settings screen Enter the SSID/WEP information and connect to the device. After the Access Point is set up and added to the connection NOTE list, the system displays the Connection screen rather than the Wireless settings screen.
Page 244 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Creating a detected device wireless connection The following screen shows an example of Bluetooth devices that are detected using the Search for Wireless Devices option. Moving the mouse cursor over a device icon displays information about the device.
Page 245 Using ConfigFree™ with your Toshiba Computer Sample dragging the file to the Bluetooth device icon To be prompted for the device: Drag and drop the file to the Bluetooth radar icon on the ConfigFree Launcher. Sample dragging the file to the Bluetooth radar icon Or, you can right click on the file and select Send to Bluetooth Devices.
Page 246: Profile Settings
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample selecting Send to Bluetooth Devices option Choose a file recipient. Click Send. During a file transfer, connecting and disconnecting to the NOTE selected device will occur automatically. Disconnecting from a Bluetooth device To disconnect from a Bluetooth device: Place the cursor on top of the connected line.
Page 247 Using ConfigFree™ with your Toshiba Computer If you visit a client company occasionally, for example, you can set up a profile to match that environment and connect to the network. Similarly, users who access networks in the office and at home can set up profiles to handle these networking environments.
Page 248 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Enter any optional comments, if desired. Click Change Icon and select an icon for this profile. Click the more capture options. Under Captured Items, select the items you want to capture for this profile.
Page 249 Using ConfigFree™ with your Toshiba Computer Sample expanded Add Profile screen The online help provides real-world examples of setting up NOTE profiles for different networking environments. After you set up one or more profiles, you can check their settings and fine-tune them as necessary. Profiles can also be imported and exported.
Page 250: Configfree Summit
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities ConfigFree SUMMIT The ConfigFree SUMMIT utility is a convenient way to share files with other users and to transfer files between your computers at home and at work. This utility is faster and more dependable than sending the files via email.
Page 251 Using ConfigFree™ with your Toshiba Computer Sample of users attending SUMMIT meeting (user icons appear on SUMMIT table) Files can be shared with one user or all users attending the meeting. To share a file with one user, drag and drop the file on the user’s icon.
Page 252 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample of sharing a file with one user To share a file with all users, drag the file to the center of the SUMMIT table where users can access it as desired.
Page 253 Using ConfigFree™ with your Toshiba Computer Participating users must be connected by LAN, wireless LAN, NOTE or Bluetooth (PAN). Firewall software may prevent ConfigFree SUMMIT from working. Using ConfigFree SUMMIT To host a ConfigFree SUMMIT: Click the Click SUMMIT. Other users appear on the SUMMIT main window.
Page 254: Quick Connect
(DPJ), then click Connect. Launching Quick Connect prevents you from using the network to connect to a Toshiba Wireless Projector when the wireless LAN Configuration is set to Ad hoc. If you are connected to an access point, the connection is broken and re- established later.
Page 255 Using ConfigFree™ with your Toshiba Computer To review the current Toshiba Wireless Projector settings and change them if necessary: Click the Move the mouse pointer to Toshiba Wireless Projector (DPJ), then click Settings. The Quick Connect properties dialog box appears.
Page 256 The wireless LAN configuration returns to the settings that were last used before the Quick Connect function was started: If the Toshiba Wireless Projector utility is closed. If you select Toshiba Wireless Projector (DPJ) from the ConfigFree tray menu (this disconnects the wireless LAN connection).
Page 257: Using The Automatic Switch
Using ConfigFree™ with your Toshiba Computer Using the Automatic Switch The Automatic Switch feature allows the computer to automatically switch profiles the next time it is powered on. This feature is particularly useful if you want your computer to automatically switch from the network configuration you use in your office to the one you use at home.
Page 258 Using ConfigFree™ with your Toshiba Computer Semi-Automatic Switch Feature To use the Semi-Automatic Switch feature: Right-click the Click Auto Switch. The Auto Switch dialog box appears. Select the Auto Switch (SSID) tab. Select the profile to be automatically selected when the SSID is detected, then click Add.
Page 259: Glossary
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms These acronyms may appear in this user’s guide. BIOS CD-ROM CD-RW CMOS COM1 COM2 alternating current basic input/output system bits per second compact disc compact disc read-only memory compact disc rewrite memory complementary metal-oxide semiconductor...
Page 260 Glossary DIMM DSTN DVD-ROM digital versatile (or video) disc read-only memory EPROM HTML IEEE LPT1 MIDI PCMCIA direct current direct memory access dual inline memory module disk operating system dots per inch dual supertwist nematic digital versatile (or video) disc enhanced capabilities port erasable programmable read-only memory file allocation table...
Page 261 SCSI DDRAM SRAM SVGA Terms These terms may appear in this user’s guide. active-matrix display — A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology. Also known as a “TFT display,” in its simplest form there is one thin film transistor (TFT) for each cell.
Page 262 Glossary backup — A copy of a file, usually on a removable disk, kept in case the original file is lost or damaged. basic input/output system (BIOS) — See BIOS. baud rate — The speed at which a communication device, such as a printer or modem, transmits information.
Page 263 CD-ROM (compact disc read-only memory) — A form of high- capacity storage that uses laser optics instead of magnetic means for reading data. See also CD. Compare DVD-ROM. central processing unit (CPU) — The chip that functions as the “brain” of the computer.
Page 264 Glossary CPU cache — A section of very fast memory residing between the CPU and the computer’s main memory that temporarily stores data and instructions the CPU will need to execute commands and programs. See also cache, L1 cache, L2 cache. cursor —...
Page 265 disk drive — The device that reads and writes information and programs on a diskette or hard disk. It rotates the disk at high speed past one or more read/write heads. diskette — A thin, flexible disk in a protective jacket that stores magnetically encoded data.
Page 266 Glossary executable file — A computer program that is ready to run. Application programs and batch files are examples of executable files. Names of executable files usually end with a .bat or .exe extension. expansion device — A device that connects to a computer to expand its capabilities.
Page 267 — The physical components of a computer system. Compare software. Hibernation — A feature of many Toshiba notebook computers that saves to the hard disk the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off.
Page 268 Glossary Internet — The decentralized, world-wide network of computers that provides electronic mail, the World Wide Web, and other services. See also World Wide Web. keyboard shortcut — A key or combination of keys that you use to perform a task instead of using a pointing device such as the Dual Mode Pad.
Page 269 microprocessor — See central processing unit (CPU). MIDI (Musical Instrument Digital Interface) — A standard for connecting musical instruments, synthesizers, and computers. The MIDI standard provides a way of translating music into a form computers can use, and vice versa. modem —...
Page 270 Glossary palette — See color palette. parallel — Processes that occur simultaneously. In communications, it means the transmission of more than one bit of information at a time. On your computer, the parallel port provides a parallel communications interface between the computer and an appropriate device.
Page 271 RAM (random access memory) — Volatile memory that can be written to as well as read. By volatile, we mean that information in RAM is lost when you turn off your computer. This type of memory is used for your computer’s main memory. See also memory. Compare ROM.
Page 272 Glossary software — See program. Compare hardware. Standby — A feature of some Windows you to turn off the computer without exiting your open applications and to continue from where you left off when you turn the computer on again. Suspend —...
Page 273 Web — See World Wide Web. Wi-Fi — A trademarked term by the Wi-Fi Alliance which stands for Wireless Fidelity, and is another term for the communication protocol to permit an Ethernet connection using wireless communication components. World Wide Web (www) — The worldwide network of Web sites linked together over the Internet.
Page 274: Index
110 not charging 194 power schemes hot key 117 power usage mode 228 real-time clock (RTC) 107 removing 119 BIOS Setup see TOSHIBA Hardware Setup Bridge Media slot 146 button power 53 start 128 creating 101 playing an audio 99...
Page 275 IRQ 189 character keys 85 charging the battery 50 checking device properties 191 click 62 communications network connection 132 system resources 189 compact disc positioning 98 compact discs handling 99 inserting 97 removing 102 computer non-system disk or disk error message 185 not accessing disk drives 184 running on battery power 105...
Page 276 Index DVI video port 68 environment computer-friendly 39 error messages device driver conflict 188 general hardware problem 188 non-system disk or disk error problem with display settings/ current settings working with hardware program has performed an illegal operation 182 warning resume failure 184 Error-checking 199 Ethernet LAN port 133 expansion memory slot 56...
Page 277 moving to desktop 127 recycle bin 127 safety 36 Industry Canada requirement 4 installation memory module 54 installing memory modules 53 mouse 71 instant passwords, using 154 Internet bookmarked site not found 187 connecting to 136 features 137 slow connection 187 surfing 136 uploading and downloading files 138...
Page 278 200 changing display properties checking device properties 191 computer hangs when PC Card computer will not power up 183 contacting Toshiba 221 corrupted/damaged data files Device Manager 190 disabling a device 191 disk drive is slow 199...
Page 279 high-pitched noise 202 illegal operation 182 Internet bookmarked site not found 187 Internet connection is slow 187 keyboard not responding 184 missing files/trouble accessing a disk 198 modem transmitting 207 no sound 202 non-system disk or disk error PC Card 203 checklist 204 error occurs 206 hot swapping fails 205...
Page 280 129 taskbar 129 television adjusting display 70 Toshiba registering computer 45 worldwide offices 223 Toshiba Assist 149 Toshiba Hardware Setup 162 Toshiba online resources 104 Toshiba utilities 148 traveling tips 125 troubleshooting DVD player general problems 211 DVD-ROM drive 201...

This manual is also suitable for:

Satellite p100 series Satellite p105 series

Toshiba P100/P105 User Manual

Chapter 1: Getting Started

Chapter 2: Learning the Basics

Chapter 3: Mobile Computing

Chapter 4: Exploring Your Computer's Features

Chapter 5: Toshiba Utilities

Chapter 6: If Something Goes Wrong

Appendix A: Hot Keys

Appendix B: Power Cord/Cable Connectors

Appendix C: Using Configfree

Quick Links

Related Manuals for Toshiba P100/P105

Summary of Contents for Toshiba P100/P105