Setting The Time - Siemens SCALANCE M-800 Series Getting Started
Simatic net industrial remote communication
Hide thumbs
Also See for SCALANCE M-800 Series:
- Operating instructions manual (72 pages) ,
- Getting started (54 pages) ,
- Operating instructions manual (106 pages)
Table of Contents
Advertisement
Connecting SCALANCE M-800 to WAN
1.3 Connecting M826 with SHDSL
4. Enter the identifier for the location at which the device is installed in "System Location",
for example the room number.
5. Click the "Set Values" button.
Result
The general device information for the SCALANCE M826 has been specified.
1.3.2.7
Setting the time
The date and time are kept on the SCALANCE M-800 to check the validity (time) of
certificates and for the time stamps of log entries. You can set the system time yourself
manually or have it synchronized automatically with a time server. For this example, the time
server is configured using NTP.
Note
Manual time setting - reaction after interrupting the power supply
Note that the time is reset to the factory setting if the power supply is interrupted. On return
of the power, you need to set the system time again. As result, certificates can lose their
validity.
Synchronization using a time server
Synchronization of the system time using a public time server creates additional data traffic
on the connection. This may result in additional costs, depending on your subscriber
contract.
58
SCALANCE M-800 Getting Started
Getting Started, 06/2015, C79000-G8976-C337-04
Hide quick links:
Advertisement
Table of Contents
