Flash Over Lan (Update Post/Bios Over Network) - IBM 3746-900 Installation And Maintenance Manual
Service processor (based on 6578)
Hide thumbs
Also See for 3746-900:
- Installation manual (276 pages) ,
- Connection and integration manual (166 pages) ,
- Installation instructions manual (10 pages)
Table of Contents
Advertisement
Flash Over LAN (Update POST/BIOS Over Network)
Note: For local Flash (BIOS/VPD) update, see "Flash (BIOS/VPD) Update
Procedure" on page 3-33.
This setting is used to enable or disable the Flash over LAN feature. When the
feature is enabled, the system programs, in the computer, can be updated remotely
from a network server. If the administrator password is set in the computer, it does
not have to be entered by the server.
To access the Flash over LAN setting:
1. Start the Configuration/Setup Utility program. See "Service Processor
2. Select System Security.
3. Select POST/BIOS Update from the Configuration/Setup Utility program menu.
4. To enable Flash over LAN, select Enabled. To disable Flash over LAN, select
5. Press Esc twice to return to the Configuration/Setup Utility program menu.
6. Before you exit from the program, select Save Settings from the
7. To exit from the Configuration/Setup Utility program, press Esc and follow the
Wake on LAN
This setting is used to enable or disable the IBM-developed Wake on LAN feature.
This feature makes it possible for the computer to be turned on remotely by a
network server. Remote network management software must be used in
conjunction with this feature.
To access the Wake on LAN setting:
1. Start the Configuration/Setup Utility program. See "Service Processor
2. Select Advanced Power Management.
3. Select Automatic Power On from the program menu.
4. Select Wake on LAN from the Automatic Power On menu.
5. To enable Wake on LAN, select Enabled. To disable the Wake on LAN
6. Press Esc until you return to the Configuration/Setup Utility program menu.
7. Before you exit from the program, select Save Settings from the
8. To exit from the Configuration/Setup Utility program, press Esc and follow the
3-36
3745-XXA 3-36 3746-9X0: 6578 SPIM
Configuration / Setup Utility" on page H-8.
Disabled.
Configuration/Setup Utility program menu.
instructions on the screen.
Configuration / Setup Utility" on page H-8.
feature, select Disabled.
Configuration/Setup Utility program menu.
instructions on the screen.
Advertisement
Table of Contents
