Download Print this page

Tuning A Station; Setting The Alarm Clock - Silvercrest SWE 100 B1 User Manual And Service Information

Multi-band tuner

Hide thumbs Also See for SWE 100 B1:

Table of Contents

Available languages

Tuning a Station

 Power the device on.

 Use the volume adjustment button [24] to set the desired sound

volume.

 First select the desired frequency band. To do this, use the band

selector [2]. The currently tuned frequency band will show on the

display [7].

 Fully extract the telescopic antenna [1].

 Rotate the frequency dial knob [23] to tune the desired frequency. The

frequency displays in MHz (for FM and SW) and in kHz (for MW). If

required, move the telescopic antenna into a different position or move

the device to optimise reception of the current station.

Make sure that the clock has been set correctly (see the page 70 - Setting

the Time). The alarm time can only be set while the device is powered off.

If it is still powered on, press the On/Off button [8] to power the device

off.

You can only pivot the telescopic antenna and not retract

it into the device housing, otherwise you risk seriously

damaging your device.

Multi-Band Tuner SWE 100 B1

English - 71

Table of Contents

Table of Contents