Table of Contents
Advertisement
SpeedStream Powerline Wireless Router User Guide
Physical Details
Front Panel LEDs
Power
Status
LAN
(1, 2, 3, 4)
WAN
Wireless
Powerline
Figure 2: Front Panel
On - Normal operation.
Off - No power
On - Error condition.
Off - Normal operation.
Blinking - This LED blinks during start up, or when the Firmware is
being upgraded.
For each LAN port, there are 2 LEDs
Link/Act
On - Corresponding LAN (hub) port is active.
Off - No active connection on the corresponding LAN (hub)
port.
Flashing - Data is being transmitted or received via the corre-
sponding LAN (hub) port.
100
On - Corresponding LAN (hub) port is using 100BaseT.
Off - Corresponding LAN (hub) port connection is using
10BaseT, or no active connection.
Flashing - data is being transmitted or received via the WAN port.
Off - no data is being transferred.
On - Wireless connection available; Wireless Access Point is ready for
use.
Off - No Wireless connection available.
Flashing - Data is being transmitted or received via the Wireless access
point. Data includes "network traffic" as well as user data.
On - Powerline connection is available.
Off - No Powerline connection available.
Flashing - Data is being transmitted or received via the Powerline inter-
face. Data includes "network traffic" as well as user data.
4
Advertisement
Table of Contents
