Table of Contents
Advertisement
Help Guide
Interchangeable Lens Digital Camera
α7RIII
ILCE-7RM3
Supplying power from a wall outlet (wall socket)
Use an AC adaptor, etc. to shoot and play back images while power is supplied from a wall outlet (wall socket). This conserves
the camera's battery power.
Insert the battery pack into the camera.
1
Connect the camera to the wall outlet (wall socket) with a USB cable and an AC adaptor, etc.
2
Note
The camera will not activate if there is no remaining battery. Insert a sufficiently charged battery pack into the camera.
If you use the camera while power is being supplied from a wall outlet (wall socket), make sure that the icon that shows that powering via USB is in
progress (
) is displayed on the monitor.
Do not remove the battery pack while power is supplied from a wall outlet (wall socket). If you remove the battery pack, the camera will be turned
off.
Do not remove the battery pack while the access lamp is lit. The data in the memory card may be damaged.
As long as the power is on, the battery pack will not be charged even if the camera is connected to the AC Adaptor, etc.
Under certain conditions, power may be supplied from the battery pack supplementarily even if you are using the AC adaptor, etc.
Do not remove the USB cable while power is supplied from a wall outlet (wall socket). Before you remove the USB cable, turn off the camera.
Depending on the camera and battery temperature, the continuous recording time may be shortened while power is supplied from a wall outlet (wall
socket).
When using a mobile charger as a power source, confirm that it is fully charged before use. Also, be careful of the remaining power on the mobile
charger during use.
4-728-781-11(1) Copyright 2017 Sony Corporation
44
Advertisement
Table of Contents
