Spanning-Tree Bpdu-Transmit; Spanning-Tree Mst - Siemens SIMATIC NET Configuration Manual
Industrial wireless lan to ieee 802.11n command line interface
Hide thumbs
Also See for SIMATIC NET:
- System manual (372 pages) ,
- Manual (300 pages) ,
- Operating instructions manual (90 pages)
Table of Contents
Advertisement
6.3.4.7
spanning-tree bpdu-transmit
Description
With this command, you enable or disable the BPDU transmit status at the port.
Requirement
You are in the Interface Configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call up the command with the following parameters:
spanning-tree bpdu-transmit{enabled|disabled}
The parameters have the following meaning:
Parameter
enabled
disabled
Result
The BPDU transmit status has switched over.
Further notes
You can display the status of this function and other information with the
interface
6.3.4.8
spanning-tree mst
Description
With this command, you configure the various properties of the Multiple Spanning Tree
function:
● With the
● With the
Multiple Spanning Tree configuration.
● With the
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
Description
BPDU packets are transmitted at the
port
BPDU packets are not transmitted at
the port
command with the
detail
option, you configure the port costs used to calculate the lowest-cost path.
cost
option, you configure the priority of the interface for negotiating a
port-priority
option, you disable the interface for the Multiple Spanning Tree function.
disable
option.
Network structures
6.3 Spanning Tree
Range of values / note
Default: enabled
-
show spanning-tree
271
Hide quick links:
Advertisement
Table of Contents
