Cli Modes - Siemens SIMATIC NET Configuration Manual
Industrial wireless lan to ieee 802.11n command line interface
Hide thumbs
Also See for SIMATIC NET:
- System manual (372 pages) ,
- Manual (300 pages) ,
- Operating instructions manual (90 pages)
Table of Contents
Advertisement
2.2
CLI modes
Grouping of the commands in the various modes
The commands of the Command Line Interface are grouped according to various modes.
Apart from a few exceptions (help, exit), commands can only be called up in the mode to
which they are assigned. This grouping allows different levels of access rights for each
individual group of commands. The following graphic is an overview of the available modes.
User EXEC mode
This mode is active after you log in as "user" in a console window. In this mode, you can use
show commands to display the current values of configuration parameters. You are logged
out with the
It is not possible to modify parameters in this mode. To be able to modify configuration
parameters, you need to change to the Privileged EXEC mode.
Privileged EXEC mode
In this mode, you can you display the configuration data and change it.
If you log with the "admin" user, you change directly to the Privileged EXEC mode.
To change from the User EXEC Mode to the Privileged EXEC mode, enter the
command. When the command executes, you will be prompted to enter the password for the
"admin" user. You are logged out with the
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
command.
exit
command.
exit
Description
2.2 CLI modes
enable
21
Hide quick links:
Advertisement
Table of Contents
