C-Plug And Key-Plug - Siemens SCALANCE M874-2 Operating Instructions Manual
Industrial remote communication remote networks
Hide thumbs
Also See for SCALANCE M874-2:
- Getting started (220 pages) ,
- Operating instructions manual (106 pages)
Table of Contents
Advertisement
Description of the device
1.6 C-PLUG and KEY-PLUG
1.6
C-PLUG and KEY-PLUG
How it works
The C-PLUG or KEY-PLUG is used to transfer the configuration of the old device to the new
device when a device is replaced.
NOTICE
Do not remove or insert a C-PLUG / KEY-PLUG during operation!
A PLUG may only be removed or inserted when the device is turned off.
The device checks whether or not a PLUG is present at one second intervals. If it is
detected that the PLUG was removed, there is a restart.
If a valid KEY-PLUG was inserted in the device, the device changes to a defined error state
following the restart.
When the new device starts up with the PLUG, it then continues automatically with exactly
the same configuration as the old device. One exception to this can be the IP configuration if
it is set over DHCP and the DHCP server has not been reconfigured accordingly.
A reconfiguration is necessary if you use functions based on MAC addresses.
If an incorrect PLUG, for example from another product or a damaged PLUG is inserted, the
device signals an error with the "F" LED.
You can either remove the PLUG again or select the option to reformat the PLUG.
In terms of the PLUG, devices work in two modes:
● Without PLUG
The device stores the configuration in internal memory. This mode is active when no
PLUG is inserted.
● With PLUG
The configuration stored on the PLUG is displayed in WBM in "Information > PLUG". If
changes are made to the configuration, the device stores the configuration directly on the
PLUG and in the internal memory. This mode is active as soon as a PLUG is inserted. As
soon as the device is started with a PLUG inserted, the device starts up with the
configuration data on the PLUG.
20
Operating Instructions, 07/2014, C79000-G89760-C331-03
SCALANCE M874, M876
- Quick Links:
- Scalance M874-2, M874-3
- Sim Card
- Scalance M876-3
Hide quick links:
Advertisement
Table of Contents
