Table of Contents
Advertisement
28
Image
Projection
Aspect Ratio
Manual Keystone
Sharpeness
H. Position
V. Position
Frequency
Tracking
Downloaded From projector-manual.com Acer Manuals
•
Front-Desktop: The factory default setting.
•
Rear-Desktop: When you select this function, the projector
reverses the image so you can project from behind a translucent
screen.
•
Rear-Ceiling: When you select this function, the projector
reverses and inverts the image at same time. You can project from
behind a translucent screen with ceiling mounted projection.
•
Front-Ceiling: When you select this function, the projector
inverts the image for ceiling-mounted projection.
Use this function to choose your desired aspect ratio.
•
Auto: Keep the image with original width-higth ratio and maxi
mize the image to fit native horizontal or vertical pixels.
•
Full: Resize image to fit full screen by width (1280 pixels) and
height (800 pixels).
•
4:3: The image will be scaled to fit the screen and displayed using
a 4:3 ratio.
•
16:9: The image will be scaled to fit the width of the screen and
the height adjusted to display the image using a 16:9 ratio.
•
L.Box: Keep original signal aspect ratio and zoom in by 1.333
times.
Adjust image distortion caused by tilting projection. (±40 degrees)
<Note> The Manual Keystone function is unavailable under Auto
Keystone setting to "On".
Adjusts the sharpness of the image.
•
Press
to decrease the sharpness.
•
Press
to increase the sharpness.
•
Press
to move the image left.
•
Press
to move the image right.
•
Press
to move the image down.
•
Press
to move the image up.
"Frequency" changes the projector's refresh rate to match the
frequency of your computer's graphics card. If you can see a vertical
flickering bar in the projected image, use this function to make the
necessary adjustments.
Synchronizes the signal timing of the projector with the graphics card.
If you experience an unstable or flickering image, use this function to
correct it.
Advertisement
Table of Contents
