No Snmp Access - Siemens SCALANCE W760 Configuration Manual
Industrial wireless lan
Hide thumbs
Also See for SCALANCE W760:
- Configuration manual (464 pages) ,
- Operating instructions manual (50 pages) ,
- Operating instructions manual (51 pages)
Table of Contents
Advertisement
7.4.2.5
no snmp access
Description
With this command, you delete the access to an SNMP group.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
snmp access <GroupName>{v1|v2c|v3{auth|noauth|priv}}
The parameters have the following meaning:
Parameter
GroupName
Version
Authentication
Result
The access to an SNMP group is deleted.
Further notes
You configure the setting with the
You display the configured SNMP groups with the
You display the access configurations for SNMP groups with the
command.
You display the configured SNMP tree views with the
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
Description
Name of the group to which access is
deleted
Selects the version of the protocol
used
Selects the authentication method:
command.
snmp access
Range of values / note
max. 32 characters
•
v1
•
v2c
•
v3
•
auth
•
noauth
•
priv
command.
show snmp group
show snmp group access
show snmp viewtree
Network protocols
7.4 SNMP
command.
311
Advertisement
Table of Contents
