Network - Siemens SCALANCE W760 Configuration Manual
Industrial wireless lan
Hide thumbs
Also See for SCALANCE W760:
- Configuration manual (464 pages) ,
- Operating instructions manual (50 pages) ,
- Operating instructions manual (51 pages)
Table of Contents
Advertisement
Network protocols
7.3 DHCP server
Syntax
Call up the command with the following parameters:
lease-time <seconds (60-31536000)>
The parameter has the following meaning:
Parameter
seconds
Result
The time is configured.
Further notes
You display the setting with the
7.3.4.2
network
Note
The command is only available with the following device:
• SCALANCE W722-1 RJ-45 (MLFB 6GK5722-1FC00-0AA0 and 6GK5722-1FC00-0AB0
(US version))
Description
With this command you configure the IPv4 address band from which the DHCP client
receives any IPv4 address.
Requirement
You are in the DHCPPOOL configuration mode.
The command prompt is as follows:
cli(config-dhcp-pool-<ID>)#
290
Description
Time until renewal of the assigned
IPv4 address in seconds
show ip dhcp-server pools
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Range of values / note
60 ... 31536000
command.
Configuration Manual, 11/2014, C79000-G8976-C351-03
Advertisement
Table of Contents
