Wlan Antenna Type - Siemens SCALANCE W760 Configuration Manual
Industrial wireless lan
Hide thumbs
Also See for SCALANCE W760:
- Configuration manual (464 pages) ,
- Operating instructions manual (50 pages) ,
- Operating instructions manual (51 pages)
Table of Contents
Advertisement
Requirement
You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-if-wlan-0-X)#
Syntax
Call up the command with the following parameters:
wlan antenna gain-5GHz <index(1)> <dBi (0-30)>
The parameters have the following meaning:
Parameter
index
gain value
Result
The antenna gain is specified.
Further notes
You show the set antenna gain with the
6.1.5.13
wlan antenna type
Description
With this command, you specify which antenna type is connected to the relevant antenna
connector.
Requirement
You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-if-wlan-0-X)#
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
Description
Slot no. of the interface
Antenna gain in decibels iso-
tropic (dBi)
show wlan antennas <wlan 0/X>
Network structures
Values or range of values
1
0 ... 30
0 = antenna is not connected
command.
6.1 WLAN
151
Advertisement
Table of Contents
