Show Lldp Status; Show Versions - Siemens SCALANCE W760 Configuration Manual
Industrial wireless lan
Hide thumbs
Also See for SCALANCE W760:
- Configuration manual (464 pages) ,
- Operating instructions manual (50 pages) ,
- Operating instructions manual (51 pages)
Table of Contents
Advertisement
3.1.1.11
show lldp status
Description
This command shows per port whether LLDP frames are sent or received.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call up the command with the following parameters:
show lldp status[{port<interface-type><interface-id>}]
The parameters have the following meaning:
Parameter
port
interface-type
interface-id
For information on identifiers of interfaces and addresses, refer to the section "Interface
identifiers and addresses (Page 23)".
Result
The information is displayed.
3.1.1.12
show versions
Description
This command shows the versions of the hardware and software of the device.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
or
cli#
Description
Keyword for a port channel
Type or speed of the interface
Module no. and port no. of the interface
or
cli#
Configuration
3.1 System
Values
-
Enter a valid interface.
41
Advertisement
Table of Contents
