No Ip Name Server; Ip Domain Used Server - Siemens SCALANCE W760 Configuration Manual
Industrial wireless lan
Hide thumbs
Also See for SCALANCE W760:
- Configuration manual (464 pages) ,
- Operating instructions manual (50 pages) ,
- Operating instructions manual (51 pages)
Table of Contents
Advertisement
Network protocols
7.1 IPv4 protocol
7.1.2.12
no ip name server
Description
This command deletes the entry with the specified index for a DNS server. If you do not
specify an index, all entries are deleted.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
no ip name-server [index <id(1-3)>]
The parameters have the following meaning:
Parameter
index
id
Result
The specified entries for the DNS servers were deleted.
7.1.2.13
ip domain used server
Description
This command specifies which DNS server the device uses.
Note
Only resource records of type A (IPv4 address of a host) are supported.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
272
Description
Keyword for the index
Index of the DNS server
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Range of values / note
-
1 ... 3
Configuration Manual, 11/2014, C79000-G8976-C351-03
Advertisement
Table of Contents
