Table of Contents
Advertisement
RM-484; RM-485; RM-486
Camera Module Troubleshooting
Introduction to camera module troubleshooting
Background, tools and terminology
Terms
Faults or complaints in camera operation can be roughly categorised into three subgroups:
1 Camera is not functional at all; no image can be taken.
2 Images can be taken but there is nothing recognizable in them.
3 Images can be taken and they are recognizable but for some reason the quality of images is seriously
degraded, or customer complains about image quality.
Image quality is very hard to measure quantitatively, and even comparative measurements are difficult
(comparing two images) to do, if the difference is small. Especially if the user is not satisfied with his/her
device's image quality, and tells, for example, that the images are not sharp, it is fairly difficult to accurately
test the device and get an exact figure which would tell whether the device is functioning properly.
Often subjective evaluation has to be used for finding out if a certain property of the camera is acceptable
or not. Some training or experience of a correctly operating reference device may be needed in order to
detect what actually is wrong, or is there anything wrong at all.
It is easy for the user to take bad images in bad conditions. Therefore the camera operation has to be checked
always in constant conditions (lighting, temperature) or by using a second, known-to-be good device as
reference. Experience helps significantly in analysing image quality.
Autofocus
Digital zoom
Dynamic range
Exposure time
Flicker
Noise
Resolution
Sensitivity
Issue 1
Camera module contains lens movement mechanics for focus adjustment. Autofocus
enables camera to take sharp images of objects positioned between 10cm to infinity.
During AF the viewfinder image will be momentarily blurred as the camera searches
for the right focus setting.
Digital zoom is done by first cropping the image by the zoom ratio and then upscaling
it to the output resolution. This will decrease the image quality especially with high
zoom ratios.
Camera's ability to capture details in dark and bright areas of the scene
simultaneously.
Camera modules use silicon sensor to collect light and for forming an image. The
imaging process roughly corresponds to traditional film photography, in which
exposure time means the time during which the film is exposed to light coming
through optics. Increasing the time will allow for more light hitting the film and thus
results in brighter image. The operation principle is exactly the same with silicon
sensor, but the shutter functionality is handled electronically i.e. there is no
mechanical moving parts like in film cameras.
Phenomenon, which is caused by pulsating in scene lighting, typically appearing as
wide horizontal stripes in an image.
Variation of response between pixels with same level of input illumination.
Usually the amount of pixels in the camera sensor. In some occasions the term
resolution is used for describing the sharpness of the images.
Camera module's sensitivity to light. In equivalent illumination conditions, a less
sensitive camera needs a longer exposure time to gather enough light in forming a
good image. Analogous to ISO speed in photographic film.
COMPANY CONFIDENTIAL
Copyright © 2009 Nokia. All rights reserved.
Page 5 –5
- Quick Links:
- Fmtx 2.1 Schematic
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
