Table of Contents
Advertisement
SSD drive
Description
512-GB, TLC, M.2
256-GB, MLC, OPAL2, M.2
256-GB, PCIe
240-GB, MLC, M.2
128-GB, TLC, M.2
Before removing the solid-state drive, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
5.
Disconnect the battery cable (see
Remove the SSD:
1.
Remove the Phillips PM2.0×3.0 screw (1) that secures the drive to the system board.
2.
Remove the drive (2) by pulling it away from the connector.
NOTE:
Reverse this procedure to install the SSD drive.
26
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
M.2 drives are designed with notches to prevent incorrect insertion.
23).
Battery on page
25).
Spare part number
855107-001
850921-001
850920-001
850922-001
855091-001
- Quick Links:
- Cables and Connectors
- Battery
- System Board
- Keyboard
Hide quick links:
Advertisement
Table of Contents
