Sony WEGA KV-BZ21 Operating Instructions Manual
Hide thumbs
Also See for WEGA KV-BZ21:
- Operating instructions manual (82 pages) ,
- Instruction & operation manual (22 pages) ,
- Operating instructions manual (62 pages)
Related Manuals for Sony WEGA KV-BZ21
Summary of Contents for Sony WEGA KV-BZ21
- Page 1 2-635-078-12 (1) Trinitron Color TV Operating Instructions • Before operating the unit, please read this manual thoroughly and retain it for future reference. KV-BZ21 KV-BZ14 © 2005 Sony Corporation...
-
Page 2: Specifications
Specifications KV-BZ14N40 Note KV-BZ21N50 Power requirements 110-240 V AC, 50/60 Hz Power consumption (W) Indicated on the rear of the TV Television system Color system NTSC3.58, PAL*, PAL 60*, SECAM*, NTSC 4.43* * AV IN only Channel coverage VHF : 2 to 13 /UHF : 14 to 69 /CATV : 1 to 125 8 (Antenna) 75-ohm external terminal Audio output (Speaker) - Page 3 WARNING • Dangerously high voltages are present inside the TV. • TV operating voltage: 110 – 240 V AC. • Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground.
-
Page 4: Getting Started
Getting Started Step 1 Insert the batteries (supplied) into the remote. Note • Do not use old or different types of batteries together. Step 2 Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV. •... - Page 5 Setting up your TV (“Initial Setup”) When you turn on your TV for the first time, the “Initial Setup” menu will appear. You may change the menu language, preset the TV channels automatically, edit the channels and adjust the picture position using the buttons on the remote control or TV top control panel.
- Page 6 Setting up your TV (“Initial Setup”) (continued) 2) To skip the program number, press V or v to select “On”. Then press You can skip this program number when using PROG +/-. Exit Select Confirm 3) To block unwanted program number, press V or v to select .
-
Page 7: Tv Top Control, Front And Rear Panels
TV top control, front and rear panels TV top control panel WEGA GATE PROG SOUND MODE TV rear panel KV-BZ21N50 KV-BZ14N40 (MONO) (MONO) (MONO) (MONO) TV front panel KV-BZ21N50 KV-BZ14N40 (MONO) (MONO) (MONO) Button/Terminal Function Turn off or turn on the TV. Remote control sensor. -
Page 8: Connecting Optional Components
Connecting optional components Connecting to the video input terminal ( t ) TV front panel KV-BZ21N50 KV-BZ14N40* Audio/Video cable (not supplied) Camcorder L(MONO)— —R (MONO)— —(MONO) TV rear panel KV-BZ21N50 KV-BZ14N40* Antenna cable (not supplied) (MONO) Audio/Video cable (MONO) (not supplied) (MONO) DVD player * Sound Mix Terminal (KV-BZ14N40 only) - Page 9 Connecting optional components (continued) Connecting to the component video input terminal ( KV-BZ21N50 only TV rear panel Component video cable (not supplied) (MONO) (MONO) DVD player Audio cable (not supplied) Notes • If your DVD player can output interlace and progressive mode signals, select the interlace output when connecting to (component video input) on your TV.
-
Page 10: G Troubleshooting
• Check the antenna cable and connection on the TV, VCR and at the wall (see F). noisy sound • Check the antenna setup. Contact a Sony dealer for advice. • Preset the channel again (see M). • Display the “Channel Setup” menu and set the “Signal Booster” to “Auto”... - Page 11 TV. The 1 (standby) • Count the number of times the 1 (standby) indicator flashes. indicator on your Press ! (main power) to turn off your TV. Contact your nearest Sony TV flashes red service center. several times after every three seconds.
-
Page 12: Using The Remote Control And Basic Functions
Using the remote control and basic functions Button Description 1 ?/1 Turn off temporarily or turn on – the TV. Display the TV program. – Jump to last program number – that has been watched for at least five seconds. PROG +/–... - Page 13 Using the remote control and basic functions (continued) Button Description WEGA GATE menu operations Confirm selected items. WEGA GATE Display or cancel WEGA GATE menu. V, v, B, b Select and adjust items. RETURN Return to the previous level. Timer operations Set TV to turn on automatically according to the –...
-
Page 14: Introducing The Wega Gate Navigator
Introducing the WEGA GATE navigator WEGA GATE is a gateway that allows you to access to preset TV channels, connected external inputs and “Settings” menu. WEGA GATE External Inputs “TV” watch the preset TV Settings channels (see D) Select Confirm Select Confirm External Inputs... -
Page 15: "Settings" Adjustment
“Settings” Adjustment You are able to change the settings of your TV from “Settings” in WEGA GATE menu. Press WEGA GATE button to display WEGA GATE menu. Press V or v to select “Settings” and press The following is an overview of the items that can be adjusted. “Picture”... -
Page 16: Changing The "Picture" Setting
Changing the “Picture” setting The “Picture” menu allows you to adjust the picture settings. Press WEGA GATE and select “Settings”. Make sure the “Picture” icon ( ) is selected, then press Press V or v to select the desired item (e.g., “Picture Mode”), then press Select “Picture Mode”... -
Page 17: Changing The "Sound" Setting
Changing the “Sound” setting The “Sound” menu allows you to adjust the sound settings. Press WEGA GATE and select “Settings”. Press V or v to select the “Sound” icon ( ), then press Press V or v to select the desired item (e.g., “Sound Mode”), then press Select “Sound Mode”... -
Page 18: Changing The "Channel Setup" Setting
Changing the “Channel Setup” setting The “Channel Setup” menu allows you to receive cable TV programs, preset channels automatically, edit the channels and set the signal booster. Press WEGA GATE and select “Settings”. Press V or v to select the “Channel Setup” icon ( ), then press Press V or v to select the desired item (e.g., “Cable”), then press Select... - Page 19 Changing the “Setup” setting The “Setup” menu allows you to change the menu language, adjust the picture position, label the connected equipment, select the color system, set the wake up timer beep and reset your TV to factory settings. Press WEGA GATE and select “Settings”. Press V or v to select the “Setup”...