Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Sony Bravia KDL-50W950C
Summary of Contents for Sony Bravia KDL-50W950C
- Page 1 Television Reference Guide KDL-50W950C / 43W950C...
-
Page 2: Table Of Contents
Introduction Table of Contents Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference. Note • Before operating the TV, please read “Safety Information” (page 2). • Instructions about “Installing the TV to the Wall” are included within this TV’s instructions manual. - Page 3 AC power cord (mains lead) with the plug that fits into the AC power outlet (mains socket). Use only Sony supplied AC power cords (mains lead), not those of other brands. Insert the plug fully into the AC power outlet (mains socket).
- Page 4 • If the TV is placed in the changing room of immediately if any of the following problems occur. a public bath or hot spring, the TV may be Ask your dealer or Sony service centre to have it checked by damaged by airborne sulphur, etc. qualified service personnel.
- Page 5 WALL-MOUNT BRACKET To Sony Dealers and Contractors: The following instructions are for Sony dealers and contractors Below information shows the correct handling of the Wall-Mount only. Be sure to read safety precautions described below and pay Bracket. Be sure to read this information thoroughly and use the special attention to safety during the installation, maintenance Wall-Mount Bracket correctly.
-
Page 6: Precautions
Wireless Function of the unit fatigue, or nausea) while watching 3D video images or playing stereoscopic 3D games. Sony recommends that all viewers take • Do not operate this unit near medical equipment (pacemaker, regular breaks while watching 3D video images or playing etc.), as malfunction of the medical equipment may result. - Page 7 ATTENTION: This product is qualified for the BEE Star rating in the ‘Home’ Mode. The Objectives of Star Labeling Program is designed to promote energy efficient products and practices. When the television is initially set up, it is designed to meet the BEE Star Labeling requirements while maintaining optimum picture quality.
-
Page 8: Parts And Controls
Parts and Controls Controls and Indicators Remote Control sensor* / Light sensor* (Input select) / Illumination LED / 3D Sync Display and select the input source. Transmitter* The Illumination LED lights up or blinks * Do not place anything near the sensor. according to the status of the TV. -
Page 9: Inputs And Outputs
* When connecting mono equipment, connect to the L (MONO) audio jack. • When connecting a large USB device, Note connect to the USB 1 socket. • When connecting with an HDMI cable, be sure to use HighSpeed HDMI Cable with Cable Type Logo (Recommended SONY Cable). -
Page 10: Using Remote Control
Using Remote Control Remote Control Parts Description / Number buttons (Input select/Text hold) In TV mode: Display and select the input (Twin picture/PIP)* source. Display two pictures simultaneously. In Text mode: Hold the current page. (Text) (TV standby) Display text information. - Page 11 Internet. If you do not have a network connection, you will be able to download GUIDE/ the software from the Sony support website using Display the digital programme guide. your PC. For details on how to upgrade, please visit the Sony support website.
-
Page 12: Connecting The Tv
To connect with Analogue Extension Connecting the TV Cable Availability depends on countries/regions/TV Note models. • When connecting the cable to the Cable/Antenna, input finger tighten only, over-tightening the connection can damage the TV. To connect with an HDMI cable <... - Page 13 Picture Quality • AV composite cable • Component cable • HDMI cable • Antenna (aerial) cable Standard definition (SD) videos have picture signals with a High definition (HD) videos have picture signals vertical resolution of 480 (NTSC) or 576 (PAL/SECAM) lines. with a vertical resolution of 720 or 1,080 lines.
-
Page 14: Installing The Tv To The Wall
To Sony Dealers and Contractors Sufficient expertise is required for installing this product. Be sure to read this instruction manual thoroughly to do the installation work safely. Sony is not liable for any damages or injury caused by mishandling or improper installation. - Page 15 Detach the cable holder from the TV. Remove the screws from the TV. Detach the Table-Top Stand from the TV. Detach the Table-Top Stand from External Speaker.
- Page 16 Preparing for the installation of the TV Prepare necessary items (supplied). Wall-Mount Attachment H External Speaker (1) C Screw (+PSW 4 x 12) D Wall-Mount Arm M Attach Wall-Mount Arm M to the External Speaker C using the supplied screws D. Soft cloth Remove the screws and petit stand from the bottom of the TV.
- Page 17 Attach the Wall-Mount Arm M with External Speaker to the TV using the supplied screws Note • Keep away External Speaker from the flat surface for placing the TV, when attach the Wall-Mount Arm to the TV. Soft cloth Soft cloth...
- Page 18 Connect the cable of External Speaker. Approx. 2-3 mm Attach the Wall-Mount Attachment H (supplied with the TV) to the rear of the TV (to make it parallel with the wall). Note • If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}. •...
-
Page 19: (Supplied)
Using the Wall-Mount Bracket (Supplied) Note • See page 5 (WALL-MOUNT BRACKET) and page 6 (WALL-MOUNT BRACKET) on WALL-MOUNT BRACKET before carrying out Wall-Mount Bracket installation. • You cannot use some of the terminals on the rear of the TV when using this mounting style. •... - Page 20 Make sure that the wall has enough space for the TV and is capable of supporting a weight of at least four times that of the TV. Refer to the following table on installing the TV to the wall. See page 30-32 (Specifications) for the TV’s weight.
- Page 21 Tape the Paper Template A to the wall and drill holes according to the numbering on the Paper Template A using an electric drill. 1, 2, 3, 4 Wall Remove the Paper Template A from the wall. Attach the Wall-Mount Base B to the wall correctly using the screws (8 mm in diameter, not supplied).
- Page 22 Attach the Wall-Mount Shaft L to the TV using the supplied screws D. Attach the Spacers C to the holes indicated by the triangle marks f. Soft cloth ×...
- Page 23 Make sure to connect and bundle the cables before installing the TV on the wall. Fix cables to the Wall-Mount Arm using the cable holder I. Cable of External Speaker Install the TV on the wall. Then, confirm the Pulley (on the Wall-Mount Shaft L) is firmly latched into the Wall-Mount Base B and the Spacers C touch the wall.
- Page 24 Dimensions of the hole positions on the wall Provide the following information to the licensed contractors if necessary. Use screws (8 mm in diameter, not supplied) to install the Wall-Mount Base B on the wall. Be sure to use the supplied Paper Template A that shows the actual position of Wall-Mount Base B for easy installation.
-
Page 25: Using An Optional Wall-Mount Bracket
Using an optional Wall-Mount Bracket This TV’s instruction manual only shows the steps on preparing the installation of the TV before installing to the wall. Use the Wall-Mount Bracket SU-WL450 (not supplied) to install the TV to the wall. When installing the Wall-Mount Bracket, also refer to the Operating Instructions and Installation Guide supplied with the Wall-Mount Bracket. - Page 26 Attach the Attachment parts for Wall-Mount Bracket. Check the Attachment parts by referring to “1” of the Wall-Mount Bracket Installation Guide. Note • If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}. • Be sure to store the unused parts in a safe place for future use. Retain this manual for future reference. Standard mounting ...
- Page 27 Screw (+PSW 6 x 20) Screw (+PSW 6 x 20) Pulley Spacer (20 mm) Belt Soft cloth Connect necessary cables to the TV. Note • You cannot access to any terminal after installing the TV to the wall. Make sure to connect and bundle the cables before installing the TV on the wall.
-
Page 28: Using The Wall-Mount Bracket (Not Supplied / Not Optional)
Install the TV to the Base. Refer to “5” of Installation Guide and “Installing the TV to the Wall” of Operating Instructions supplied with the Wall-Mount Bracket. Model Name KDL- Hook location 50W950C / 43W950C Refer to the instructions supplied with the Wall-Mount Bracket for your model to install the TV on the wall. Using the Wall-Mount Bracket (Not Supplied / Not Optional) Remove Pulley from the rear of the TV to use Wall-Mount Bracket (not supplied or not optional). -
Page 29: Troubleshooting
TV for two minutes, then turn on the TV. If the problem persists, contact your dealer or Sony service centre with the number of times the illumination LED flashes red (interval time is The illumination LED is turned on. -
Page 30: Specifications
Cannot find the required network name in network setup. Specifications Select [[Manual entry]] and press to enter network name. System Panel system LCD (Liquid Crystal Display) Panel, LED Backlight TV system Analogue: B/G, I, D/K, M Digital: DVB-T/DVB-T2 Colour/video system Analogue: PAL, SECAM, NTSC3.58, NTSC4.43 Digital: Refer to the Help Guide Channel coverage... -
Page 31: Trademark Information
KDL-50W950C: 50 inches / 125.7 cm Laboratories. KDL-43W950C: 43 inches / 108.0 cm Dolby and the double-D symbol are Display resolution trademarks of Dolby Laboratories. 1,920 dots (horizontal) × 1,080 lines (vertical) • “BRAVIA” and are trademarks of Sony Corporation. - Page 32 Inc. Portions © UEI 2000 – 2014 • The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners.
- Page 36 Customer Support and Contact: ©2015 Sony Corporation Printed in Malaysia 4-565-468-11(1)