Troubleshooting Chart - IBM Netfinity 7600 Installation Manual
Hide thumbs
Also See for Netfinity 7600:
- User reference manual (192 pages) ,
- Configuration and options manual (127 pages)
Table of Contents
Advertisement
Troubleshooting chart
a r t
T r o u b l e s h o o t i n g c h
Monitor problems
Testing
The screen is blank.
Only the cursor appears.
The monitor works when
you turn on the server, but
goes blank when you start
some application programs.
Wavy, unreadable, rolling,
distorted screen, or screen
jitter.
Wrong characters appear on
the screen.
Notes:
1. Refer to the "Solving problems" section of the User's Reference on the IBM Netfinity
Documentation CD for more detailed troubleshooting charts.
2. If you cannot find the problem in the troubleshooting charts, run the diagnostic
programs. If you have run the diagnostic test programs, or if running the tests
does not reveal the problem, call for service.
Some IBM monitors have their own self-tests. If you suspect a problem with
your monitor, refer to the information that comes with the monitor for
adjusting and testing instructions.
If you still cannot find the problem, call for service.
Verify that:
1. The server power cord is plugged into the server and a working
electrical outlet.
2. The monitor cables are connected properly.
3. The monitor is turned on, and the Brightness and Contrast controls are
adjusted correctly.
If the items above are correct and the screen remains blank, call for service.
Call for service.
Verify that:
1. The primary monitor cable is connected to the video port.
2. You installed the necessary device drivers for the applications.
If the items above are correct and the screen remains blank, call for service.
If the monitor self-tests show the monitor is OK, consider the location of the
monitor. Magnetic fields around other devices (such as transformers,
appliances, fluorescent lights, and other monitors) can cause screen jitter or
wavy, unreadable, rolling, or distorted screen images. If this happens, turn
off the monitor. (Moving a color monitor while it is turned on might cause
screen discoloration.) Then move the device and the monitor at least 305
mm (12 in.) apart. Turn on the monitor.
Notes:
1. To prevent diskette drive read/write errors, be sure the distance
between monitors and diskette drives is at least 76 mm (3 in.).
2. Non-IBM monitor cables might cause unpredictable problems.
3. An enhanced monitor cable with additional shielding is available for
the 9521 and 9527 monitors. For information about the enhanced
monitor cable, see your IBM reseller or IBM marketing representative.
If the problem remains, call for service.
If the wrong language is displayed, update the BIOS with the correct
language.
If the problem remains, call for service.
Troubleshooting chart
Suggested action
Chapter 5. Solving problems
27
Advertisement
Table of Contents
